• Atmosphere
• /
• v.18 no.4
• /
• pp.339-354
• /
• 2008

A numerical simulation of a heavy snowfall event that occurred 13 January 2008 along the Yeongdong coastal area, was performed using WRF (Weather Research and Forecasting) in order to reveal mesoscale structures and to construct a conceptual model showing the meteorological background that caused the large difference in snowfall amounts between the Yeongdong mountain area and the Yeongdong coastal area. The simulation results matched well with various observations such as corresponding 12h-accumulated observed precipitation, surface wind obscrvation, radar echoes, and satellite infrared images. The simulation and the observations showed that the scale of the event was of meso - $\beta$ and meso - $\gamma$ scale. The simulation represented well the mesoscale process causing the large difference in snowfall amounts in the two areas. First, wind flow was kept, to a certain extent, from crossing the mountains due to the blocking effect of the low Froude number (~1). The northeast flow over the adjaccnt sea tumcd northwest as it approachcd the mountains, where it was trapped, allowing so-called cold air damming. Second, a strong convergence area formed where the cold northwest flow along the Yeongdong coastal area and the relatively warm and moist northeast flow advecting toward the coast met, supporting the fonllation of a coastal front. Thus, the vertical motion was strongest over the front located near the coast, leading to the heavy snowfall there rather than in the remote mountain area.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.85-96
• /
• 2016

Double split tee connection has various strength, stiffness, and energy dissipation capacity according to changes of thickness of T-stub flange and gauge distance, number, and diameter of high-strength bolt. If the double split tee connection is applied to a low- or medium-rise steel structure, a shear tab can't be applied for supporting shear force because of geometrical limitation. So it is required to propose details of improved double split tee connection to support shear force as well as flexural force. This research was performed to see if enough rotational stiffness is found when the double split tee connection without shear tab which was obtained through analytic and experimental researches by Yang et al. is applied to a low- or medium-rise steel structure. Also, it was seen if the low- or medium-rise steel structure having double split tee connection without shear tab has safe structural behavior, as well as material saving effect.

• Korean Journal of Veterinary Pathology
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2002

Oval cell is considered as facultative precursor cells for both hepatocytes and biliary cells, as well as origin of hepatocellar and cholangiocellular carcinoma (CCC) during carcinogenesis or toxic liver injury. To clarify the cellular origin or differentiation of cholagiocarcinogensis, the fate of carcinogen-induced oval cells was pathologically and phenotypically chased in Syrian golden hamster liver after Clonorchis sinensis (CS) infection which would give rise to a promoting effect. Two week treatment of hamsters with 0.005% diethylnitrosamine (DEN) followed by 2 week treatment of 1% 2-acetylaminofluorene (AAF) under choline deficient diet resulted in massive proliferation of BrdU labeleed and PCNA positive oval cells showing various distinct morphology, histochemical and immunohistochemical phenotypes for GGT, cytokeratin 19 and OV-6. Oval cells also frequently form ductular-like structures or phenotypically show hepatocyte-like characteristics. After CS infection, the oval cells showed sequential morphological changes to atypicl proliferating bile ductules and all hamsters thereafter developed well differentiated and anaplastic CCC at 16 week after CS infection. In electron microscopy, some bile ductules were constructed by intermediate oval cells and bile ductular cells surrounded by basement membrane. The results of this study strongly suggest that CCC developed in the present study were originated from hepatic stem-like oval cells, supporting the theory of stem cell origin of cancers. In addition, this hamster model would be valuable for the molecular mechanistic study during chemical-triggered cholangiocarcinogenesis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.589-601
• /
• 2003

XLink is XML Linking Language that defines links between XML documents or XML elements. It uses XML syntax to create structures that can describe links similar to the simple unidirectional hyperlinks of HTML, as well as more sophisticated links. There exist several relationships between resources that linked by XLink. Without supports from XML Repository for these relationship management, there is a huge overhead related to the management of relationships during both application development and maintenance, since the relationships need to be hard-coded directly into the application program itself. In this paper, we propose an XLink supporting system in object repository. We describe the design and implementation of this system on top of XDOM(persistent DOMlink XML repository). To support XLink, our system offers referential relationship semantics, extended link and the expansion of DOM tree for XLink.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.268-276
• /
• 1998

Dentigerous cyst is a cyst arising by a seperation of follicles from around the anatomical crown of an unerupted tooth within the jaws. The dentigerous cyst is seen during routine radiographic examination. It is detected radiographically as a sharply delineated, round or oval, unilocular, homogeneous, and radiolucent area within which there is the crown of an unerupted tooth. The histological appearance of the dentigerous cyst is usually attached to the tooth at the cementoenamel junction and the sac lined by a thin, regular. stratified squamous epithelium. The dentigerous cyst can be treated by two surgical procedures: enucleation or marsupialization. The size and location of the lesion usually dictates the surgical procedures. The marsupialization consists of the removal of only a portion of the wall of the cyst to make the remaining cystic lining continous with the oral mucosa. The cyst, deprived of its supporting hydrostatic pressure, gradually shrinks until it is obliterated. The marsupialization is the best way to conserve the tooth affected by a dentigerous cyst and to permit its eruption. especially in a young person. Main advantages of the marsupialization are its relative simplicity and its conservation with respect to adjacent important structures. In marsupialization technique, a plugger can be constructed, if necessary, to maintain the opening and prevent food debris from entering the cystic cavity. However, the disadvantage is the potentiality of leaving pathologic tissues. Therefore frequent recall appointments are advisable.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.1
• /
• pp.75-87
• /
• 2006

The purpose of this study was to investigate the effects of prostheses misfit, cantilever on the stress distribution in the implant components and surrounding bone using three dimensional finite element analysis. Two standard 3-dimensional finite element models were constructed: (1) 3 ITI implant supported, 3-unit fixed partial denture and (2) 3 ITI implant supported, 3-unit fixed partial denture with a distal cantilever. variations of the standard finite element models were made by placing a $100{\mu}m$ or $200{\mu}m$ gap between the fixture, the abutment and the crown on the second premolar and first molar. Total 14 models were constructed. In each model, 244 N of vertical load and 244 N of $30^{\circ}$ oblique load were placed on the distal marginal ridge of the distal molar. von Mises stresses were recorded and compared in the crowns, abutments, crestal compact bones, and trabecular bones. The results were obtained as follows: 1. In the ITI implant system, cement-retained prostheses showed comparatively low stress distributions on all the implant components and fixtures regardless of the misfit sizes under vertical loading. The stresses were increased twice under oblique loading especially in the prostheses with cantilever, but neither showed the effects of misfit size. 2. Under the oblique loading and posterior cantilever, the stresses were highly increased in the crestal bones around ITI implants, but effects of misfit were not shown. Although higher stresses were shown on the apical portion of trabecular bones, the effects by misfit were little and the stresses were increased by the posterior cantilever. 3. When the cement loss happened in the ITI implant supported FPD with misfit, the stresses were increased in the implant componets and supporting structures.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.364-371
• /
• 2017

Compared to one made of glass, an aluminum mirror features light weight, compact design, low cost, and quick manufacturing. Reflective mirrors and supporting structures can be made from the same material, to improve the athermal performance of the system. With the rapid development of ultraprecise machining technologies, the field of applications for aluminum mirrors has been developed rapidly. However, most of them are rotationally symmetric in shape, and are used for infrared applications. In this paper, the design and manufacture of an off-axis aluminum mirror used for a three-mirror-anastigmat (TMA) optical system at visible wavelengths is presented. An optimized, lightweight design provides a weight reduction of more than 40%, while the surface deformation caused by earth's gravity can meet the required tolerance. The two pieces of an off-axis mirror can be diamond-turned simultaneously in one setup. The centrifugal deformation of the off-axis mirror during single-point diamond turning (SPDT) is simulated through the finite-element method (FEM). The techniques used to overcome centrifugal deformation are thoroughly described in this paper, and the surface error is reduced to about 1% of the original value. After post-polishing, the form error is $1/30{\lambda}$ RMS and the surface roughness is better than 5 nm Ra, which can meet the requirements for visible-light imaging.

• Animal cells and systems
• /
• v.4 no.3
• /
• pp.223-229
• /
• 2000

Limbs and supporting structures of an organism experience a full weight of its own when it lands from water, because neutral buoyancy in the aquatic habitat will be no longer available in the terrestrial world. Metamorphosis of anuran amphibians presents 8 good research model to examine how this transition from non-loading to weight-loading affects development of motor capacity at the time of their first emergence on land. Our video analysis of the transitional anurans, Rana catesbeiana, at Gosner stage 46 (the stage of complete transformation) demonstrated that the take-off speed increased 1.23-fold after the first six hours of weight-loading on the wet ground. It did not increase further during the following three days of loading, and was close to the level of mature frogs with different body mass. During development of larvae in deep water with no chance of landing through metamorphosis, both tension and power of a hindlimb anti-gravity muscle increased 5-fold between stages 37 and n. However, the muscle contractility increased more rapidly when the larvas could access the wet ground by their natural landing behavior after stages 41-42. Muscle power, one of major factors affecting locomotory speed, was 1.29-fold greater in the loaded than in the non-loaded larvae at the transitional stage. Thus, weight-loading had a potentially significant effect on the elevation of motor capacity, with a similar extent of increment in locomotory speed and muscle power during the last stages of metamorphosis. Such a motor adjustment of the froglets in a relatively short transitional period would be important for effective ecological interactions and survival in their inexperienced terrestrial life.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.21-29
• /
• 2014

This paper deals with the bonding characteristic of grouted joint connections of monopile support structures for offshore wind power facilities. For the integration of pile connection of wind power supporting structure, fiber reinforced high performance cementeous grout was developed and the ultimate compressive strength of it is 125MPa and the direct tensile strength is 7.5 MPa at 7 days. To assess the bond strength of grout filled in pile connection, small scaled direct bond tests under axially loaded was performed and analyzed according the existing guidelines. The fiber volume fraction (0%, 0.5% and 0.9%), aspect ratio of fiber (60 and 80) and the ratio of height to spacing of shear key (0.013 and 0.056) were adopted as the experimental variables. From the test results, the maximum bond strength among the all specimens was 30.8MPa and the bond strength of grouted connection was affected by the ratio of height to spacing of shear key than the fiber volume fraction.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.56-65
• /
• 2006

Recently the study on service robots has been proliferated in many fields, and there are active developments for indoor services such as supporting for elderly people. It is important for robot to recognize objects and situations appropriately for effective and accurate service. Conventional object recognition methods have been based on the pre-defined geometric models, but they have limitations in indoor environments with uncertain situation such as the target objects are occluded by other ones. In this paper we propose a Bayesian network model to reason the probability of target objects for effective detection. We model the relationships between objects by activities, which are applied to non-static environments more flexibly. Overall structure is constructed by combining common-cause structures which are the units making relationship between objects, and it makes design process more efficient. We test the performance of two Bayesian networks for verifying the proposed Bayesian network model through experiments, resulting in accuracy of $86.5\%$ and $89.6\%$ respectively.