• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.597-599
• /
• 2003

Moving pattern is as a kind of sequential pattern, which can be extracted from the large volume of location history data. This sort of knowledge is very useful in supporting intelligence to the LBS or GIS. In this paper, we proposed the continuous moving pattern mining approach in LBS platform and LBS Miner. The location updates of moving objects affect the set of the rules maintained. In our approach, we use the validity thresholds that indicate the next time to invoke the incremental pattern mining. The mining system will play a major role in supporting the various LBS solutions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.457-457
• /
• 2000

The display module of PDP consists of a pair of fine electrode patterned panels. For example, in case of 42" PDP, thousands of electrode patterns should be placed on panel, where length, width, and height of each pattern m one meter, 50${\mu}{\textrm}{m}$, and 30${\mu}{\textrm}{m}$ respectively. And pitch between patterns is around 200${\mu}{\textrm}{m}$. Electrode patterns are frequently damaged during the production process, and thus might be broken. These breakage will result in open-circuited electrical characteristic of a pattern and/or open-circuited electrical characteristic between patterns. Therefore, inspection of pattern defects is the inevitable process to improve production yield rate of the panel. In this paper, we first review several types of PDP pattern defects which affects yield-rate of PDP. And, problems of inspecting such pattern defects by a typical inspection method is addressed. Then, a novel inspection method is proposed to overcome the difficulties, where some new components and the algorithm to detect the electrode defects are explored.ored.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.113-132
• /
• 2005

The purpose of this study was to assess the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to a friction-fit joint (Astra; Model 1) or slip- fit joint (Frialit-2; Model 2) in the internal connection system under vertical and inclined loading using finite element analysis. In conclusion, in the internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to the abutment connection form had difference among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the abutment post. The magnitude of the stress distributed in the supporting bone, the implant fixture, the abutment and the abutment screw was higher in the friction-fit joint than in the slip-fit joint. But it is considered that the further study is necessary about how this difference in the magnitude of the stress have an effect on the practical clinic.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.602-611
• /
• 2006

This paper proposes a locomotion pattern and a control method for biped robots with curved soles. First, since the contact point of a supporting leg may arbitrarily move back and forth on the ground, we derived the desired trajectory from a model called the Moving. Inverted Pendulum Model (MIPM) where the Zero Moment Point (ZMP) exists at the supporting point and can be moved intentionally. Secondly, a biped robot with curved soles is an under-actuated system since the supporting point contacting with a point on the ground has no actuator during the single supporting phase. Therefore, this paper proposes a computed-torque control for this under-actuated system using decoupled dynamic equations. A series of computer simulations with a 7-DOF biped robot with curved soles shows that the proposed walking pattern and control method are effective and allow the biped robot to walk fast and stably, and move more like human beings. Also, it is shown that the curved sole shape has superior energy consumption compared to flat soles, and greater efficiency in ascending and descending the stairs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1382-1387
• /
• 2010

A 3D FEM numerical analysis was performed to observe the changes of supporting system of a old 1-lane tunnel when it is enlarged to 2-lane, 3-lane and 4-lane. The standard Type-III supporting pattern was applied to the new tunnel because the ground was assumed as Type-III. The observation was carried out at the middle supporting system of the old 1-lane tunnel alignment. The results shows that the changes of old tunnel supporting system began when the new tunnel was excavated at 2D(D is the equivalent diameter of 1-lane tunnel) behind of the observation place and became very rapid from 1D.

• 한국터널지하공간학회 논문집
• /
• 제25권1호
• /
• pp.1-11
• /
• 2023

본 연구에서는 수치해석을 이용해 주방식 지하공간의 안정성을 검토하고 고찰하였다. 수치해석을 수행하기에 앞서 현장지반조사를 수행하고 지반조사결과를 이용하여 지보패턴을 선정하였다. 지보패턴은 암반 등급 별 Type-1, 2, 3을 선정하였으며 주방식 지하공간은 암주와 지하공간으로 구성된 형상으로 구성되어 효과적인 모사를 위해 3차원 수치해석모델을 개발하였다. 지보패턴 안정성 검토결과, 모든 지보패턴에서 천단변위, 내공변위, 지보재 응력 모두 안정한 것으로 확인되었다. 시공단계에 의한 해석결과, 암주가 형성되는 시공단계에서 지하공간에 과도한 응력이 발생하는 경향이 확인되었다. 이를 통해, 실제 시공 시 암주 형성 시공단계에서 정밀한 시공이 요구될 것으로 판단된다.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.577-608
• /
• 1997

The purpose of this study is to evaluate the stress distribution in the bone around dental implants supporting mandibular overdenture according to the number of implant and the type of attachment. Two or four implants were placed in an edentulous mandibular model and three dimensional photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure and also to calculate principal stress components at cervical area of each implant. The attachments tested were rigid and resilient type of Dolder bar, Round bar, Hader bar and Dal-Ro attchment. The results were as follows ; 1. In 2-implant supported overdenture using Round bar, Hader bar, and Dal-Ro attachment, compressive stress pattern was observed on the supporting structure of implant on loaded side, while tensile stress pattern in unloaded side. 2. In 2-implant supported overdenture using Dolder bar, the rigid Dolder bar shared the occlusal loads between 2 implants in a more favorable manner than was exhibited by the resilient type, while the resilient type placed a more stress on the distocervical area of the implant on the loaded side. But compressive stress pattern was observed in both the loaded and unloaded sides in either case. 3. In 2-implant supported overdenture, rigid and resilient type of Dolder bar exhibited more cross arch involvement than the Round bar, Hader bar, or Dal-Ro attachment. 4. In 4-implant supported overdenture using resilient Dolder bar and Hader bar, stress turned out to be distributed evenly among the implants between loaded and unloaded side, but thor was no reduction in the magnitude of the stress in the surrounding structure of implant contratry to 2-implant supported overdenture. 5. The stress pattern at cervical area of implant was different with the number of implant or the type of attachment but the overload, harmful to surrounding structure of implant, was not observed.

• 대한가정학회지
• /
• 제34권2호
• /
• pp.117-128
• /
• 1996

The purpose of reasearch is to study the teenagers' attitude of supporting their to predict the changed pattern and the possible evolution of family relationship, provide schools and the society with meaningful information for education policy and to propose an appropriate life style for the eldery parents. As an investigative method, questionaies were used to 600 people including students in schools located in Suwon, Kyongki-Do. All the data were processed with the Satistical Analysis System (SAS). The results of this study can be summarized as follows : 1. Teenagers' living with their grandparents said that get much help from their grandparents 2. The teenagers' consciousness of supporting their parents when they grow old varied according to sex : i.e. male students said that children should bear the cost of supporting their old parents. 3. The more educated, the more accepting of their future life in the homes for the aged. 4. A low level of expectations for children's support in that many parents believed that the responsibility for support lies in the parents themselves.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.439-449
• /
• 2011

터널의 페이스매핑(face mapping)을 신속하고 신뢰성 있게 수행하기 위하여 디지털 사진으로부터 3차원 좌표의 점군(point cloud)을 생성하고 이로부터 절리면의 방향과 간격 및 암질지수(R.Q.D), 절리면 거칠기 등을 분석하였다. 분석결과를 공학적 암반분류 방법인 RMR(Rock Mass Rating)과 Q 시스템에 입력하여 보강방법을 결정하고 터널을 시공하였다. 그 결과 터널 페이스매핑 작업의 안전성을 높이면서, 분석부터 보강작업까지의 시간을 절약하였다. 또 터널 막장면의 디지털 영상과 공학적 암반분류용 정보를 객관적으로 평가하고 필요 시재분석이 가능하도록 보존함으로써 보강등급 결정과 터널보강 방법의 신뢰도를 높였다.