• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.869-886
• /
• 2016

Non-Deformable Support System (NDSS) is one of the support system analysis methods. It is likely seen as numerical analysis. Obviously, numerical modeling is the key tool for this system but not unique. Although the name of the system makes you feel that there is no deformation on the support system, it is not true. The system contains some deformation but in certain tolerance determined by the numerical analyses. The important question is what is the deformation tolerance? Zero deformation in the excavation environment is not the case, actually. However, deformation occurred after supporting is important. This deformation amount will determine the performance of the applied support. NDSS is a stronghold analysis method applied in full to make this work. While doing this, NDSS uses the properties of rock mass and material, various rock mass failure criteria, various material models, different excavation geometries, like other methods. The thing that differ NDSS method from the others is that NDSS makes analysis using the time dependent deformation properties of rock mass and engineering judgement. During the evaluation process, NDSS gives the permission of questioning the field observations, measurements and timedependent support performance. These transactions are carried out with 3-dimensional numeric modeling analysis. The goal of NDSS is to design a support system which does not allow greater deformation of the support system than that calculated by numerical modeling. In this paper, NDSS applied to the problems of Tunnel 34 of the same Project (excavated with NATM method, has a length of 2218 meters), which is driven in graphite schist, was illustrated. Results of the system analysis and insitu measurements successfully coincide with each other.

• Journal of Service Research and Studies
• /
• v.2 no.2
• /
• pp.91-98
• /
• 2012

The emergence of new types of embedded computing devices and developments in wireless networking are broadening the domain of computing from the work place and home office to other facets of everyday life. This trend is expected to lead to a proliferation of Internet of Things (IoT) environments, in which inexpensive and interconnected computing devices are capable of supporting users in a range of tasks. Context-aware computing is a key source to develop such smart services. However, there are many challenges to enable services to be smart; Heterogeneous Computing Environments, Resource Limitations, Large Amount of Data Produced, and Different Requirements for Context Interpretation. Because of these challenges, there are difficulties in providing smart service by utilizing IoT devices. Currently, many researchers are conducting researches on mobile-computing based smart service development and provisioning and network infrastructure for interconnected IoT devices. Still, there are some limitations on developing core technologies for IoT computing based smart service development. In order to remedy this situation, this thesis presents a reusable framework that provides unique and noble features which are required in developing advanced context-aware IoT applications.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.687-697
• /
• 2004

This paper is aimed to guide ocean-going companies to reasonable decisions and to increase the competitiveness of Korean shipping industry by clarifying the determinants of political costs of ocean-going companies, which only depend for the enormous amount of money to introduce the operating fixed assets, or the vessels, upon the supporting policy from the government or the loan from the related financial institutions. As independent variables of the political costs, 5 elements were settled such as company size(sales, total assets and market share), debit ratio, capital concentration ratio, profitability(operating profit) and marine risk(sales fluctuation). To verify the relations and the effect level between dependent variables and political costs, the Multiple Regression Analysis Model was applied The result of the analysis shows significantly positive relations between size variables and political cost of shipping industry. Moreover, debt ratio and profitability were proved significant related with political costs of shipping industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1610-1618
• /
• 2014

Wearable computer systems can use the wireless universal serial bus (WUSB) that refers to USB technology that is merged with WiMedia PHY/MAC technical specifications. In this paper, we focus on an integrated system of the wireless USB over the IEEE 802.15.6 wireless body area networks (WBAN) for wireless wearable computer systems supporting U-health services. And a communication structure that performs the hibernation for low power consumption is proposed for WUSB over IEEE 802.15.6 hierarchical protocol. In the proposed hibernation mechanisms, WUSB communications are permitted at each m-periodic inactive periods of WBAN superframes by using the WBAN information of Wakeup Period and Wakeup Phase message fields. In our performance evaluations, performances according to amount of WUSB traffic and Wakeup Periods are analyzed respectively to evaluate the effectiveness of proposed hibernation structure in WUSB over IEEE 802.15.6.

• Spatial Information Research
• /
• v.18 no.2
• /
• pp.35-44
• /
• 2010

This research intended to estimate the damage information from torrential rainfalls using airphotos and spatial data which have been rapidly increasing their applicability recently. The study area was Bonghwagun of Gyungsangbukdo where the large amount of damages were occurred from torrential rainfall in July, 2008. For this study, the database was constructed for the study area by collecting usable data. The interpretable items from the airphotos of 40cm spatial resolution were selected. Also, the useful GIS layers such as road were selected in the digital map to extract the damage information more accurately and rapidly. The damaged area was easily identified through the comparison of pre- and post-disaster airphotos. The recovery cost was estimated by applying unit cost to the damaged area. GIS's overlay function was used to extract the damage information of for individual items damaged. The method for extracting damages information using GIS and airphotos could be more efficient and cost effective in case of relatively wide and unapproachable damaged areas. It is also expected that the method using high resolution imagery would lead to minimize the secondary damages as well since it can facilitate the damage estimation within short period of time thereby supporting early securing budget for recovery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.116-126
• /
• 2009

The use of short implants has been accepted risky from biomechanical point of view. However, short implants appear to be a long term viable solution according to recent clinical reports. The purpose of this study was to investigate the effect of different diameter and length of implant size to the different type of bone on the load distribution pattern. Stress analysis was performed using 3-dimensional finite element analysis(3D-FEA). A three-dimensional linear elastic model was generated. All implants modeled were of the various diameter(${\phi}4.0$, 4.5, 5.0 and 6.0 mm) and varied in length, at 7.0, 8.5 and 10.0 mm. Each implant was modeled with a titanium abutment screw and abutment. The implants were seated in a supporting D2 and D4 bone structure consisting of cortical and cancellous bone. An amount of 100 N occlusal load of vertical and $30^{\circ}$ angle to axis of implant and to buccolingual plane were applied. As a result, the maximum equivalent stress of D2 and D4 bones has been concentrated upper region of cortical bone. As the width of implant is increased, the equivalent stress is decreased in cancellous bone and stress was more homogeneously distributed along the implants in all types of bone. The short implant of diameter 5.0mm, 6.0mm showed effective stress distribution in D2 and D4 bone. The oblique force of 100N generated more concentrated stress on the D2 cortical bone. Within the limitations of this study, the use of short implant may offer a predictable treatment method in the vertically restricted sites.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.335-345
• /
• 2017

It is necessary for an instructor to understand the student's team building behavior for an effective guidance of team activities. In this study, we developed an agent-based computational model for simulating the student's self-controlled behavior. We validated the model by comparing the actual behavior. Through the simulation, we found that the time to stabilization of team formation and the ratio of the students having no team are decreasing as the population of the student increases. However, we also found that over a certain amount of population, the time and the ratio do not show much progress in the difference. The simulation also shows that the more heterogeneity between the students the higher chance of delaying the team formation and increasing the ratio. We expect to use the model as a tool for guiding and supporting students' team activities.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.385-390
• /
• 2002

Nowadays, there are many attempts to develop domestic medical-equipments. In this study, it is performed to developed a new vertebral fusion device. The basic models are a rectangular-frame type and a screw type which are generally used for the patients. The main purpose of the development of a new device is to reduce the amount of bone taken out for the insertion of a device to vertebral disc and this paper is focused on th concept of a new device shape. In the results, two types are devised. One is a folding type and the other is a separate-push-in type device both are in primitive stage. However, in a folding type there are mechanical pins and the analysis of pins and the lock system is still in study and needs some time. Therefore a separate-push-in type is introduced in this study mainly and a prototype and 3-D finite element model are made and experimented and stress analyzed. From the results it is considered that it is stable for the basic loading condition of vertebra, however, it is required to develop a supporting operational equipment for the convenience of the operation in practice.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.6
• /
• pp.555-568
• /
• 2000

The World Wide Web has become the largest virtual system that is almost universal in scope. In recent research, it has become effective to utilize idle hosts existing in the World Wide Web for running applications that require a substantial amount of computation. This novel computing paradigm has been referred to as the advent of global computing. In this paper, we implement and propose a mobile object-based global computing framework called Tiger, whose primary goal is to present novel object-oriented programming libraries that support distribution, dispatching, migration of objects and concurrency among computational activities. The programming libraries provide programmers with access, location and migration transparency for distributed and mobile objects. Tiger's second goal is to provide a system supporting requisites for a global computing environment - scalability, resource and location management. The Tiger system and the programming libraries provided allow a programmer to easily develop an objectoriented parallel and distributed application using globally extended computing resources. We also present the improvement in performance gained by conducting the experiment with highly intensive computations such as parallel fractal image processing and genetic-neuro-fuzzy algorithms.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.73-83
• /
• 2020

Agricultural drought is a natural phenomenon that is difficult to observe and quantitatively express, and agricultural water use is high and usage patterns are diverse, so even if there is a lack of rainfall. The frequency and severity of agricultural drought are increased during the irrigation period where the demand for agricultural water is generated, and reasonable and efficient management of agricultural water for stable water supply is required. As one method to solve the water shortage of agricultural water in an unstructured method, it is necessary to analyze the appropriate supply amount and supply method through simulation from the intake works to the canals organization and paddy field. In this study, irrigation efficiency was analyzed for irrigation systems from April to September over the past three years from the Musu Reservoir located in Jincheon-gun, Chungcheongbuk-do and Pungjeon Reservoir located in Seosan-si, Chungcheongnam-do. SWMM (Storm Water Management Model) was used to collect agricultural water, and irrigation efficiency analysis was conducted using adequacy indicators, and water supply vulnerability. The results of the agricultural water distribution simulation, irrigation efficiency and water supply vulnerability assessment are thought to help the overall understanding of the agricultural water supply and the efficient water management through preliminary analysis of the methods of agricultural water supply in case of drought events.