• 대한화학회지
• /
• 제55권4호
• /
• pp.666-672
• /
• 2011

Vanadium 치환체인 polyoxometalate 1, [Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$을 가지고 있는 inorganicorganic complex의 촉매 활성도를 Biginelli 반응에 적용하여 연구하였다. Dihydropyrimidinones를 one-pot 합성하는 반응에서, $H_3PMo_{12}O_{40}$ 촉매 보다[Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$ 촉매가 더 좋은 결과를 나타내었다.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.114-120
• /
• 2008

The pyrolysized carbon xerogel and aerogels were prepared from the sol-gel polymerization of resorcinol-formaldehyde(RF) followed by the dry process under ambient pressure and supercritical carbon dioxide condition respectively. The thermal behaviour of RF polymer xerogel was investigated with TGA analyzer to correspond with the pyrolysis process. The surface properties such as particle size, morphology and the point of zero charge of the pyrolysized porous carbon aerogels were studied for the precious metal catalyst supported media. It was found that the volume of the polymer aerogel decreased because of the significant linear shrinkage and weight loss of polymer gel during the carbonization. The point of zero charge of the carbon aerogel pyrolysized at $1050^{\circ}C$ under inert gas flow was about 10.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.417-423
• /
• 2022

With the emerging importance of catalysts for water electrolysis, developing efficient and inexpensive electrocatalysts for water electrolysis plays a vital role in renewable hydrogen energy technology. In this study, a 1nm thickness of TiC-supported Ru catalyst for hydrogen evolution reaction (HER) has been successfully fabricated using an electron (E)-beam evaporator and thermal decomposition of gaseous CH₄ in a furnace. The prepared Ru/TiC catalyst exhibited an outstanding performance for alkaline hydrogen evolution reaction with an overpotential of 55 mV at 10 mA cm^-2. Furthermore, we demonstrated that the outstanding HER performance of Ru/TiC was attributed to the high surface area of the support and the metal-support interaction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.166-166
• /
• 2013

Mesoporous $SiO_2$-supported Ni catalysts (Ni/$SiO_2$ and Ni/$TiO_2$/$SiO_2$) were fabricated by atomic layer deposition (ALD), and their catalytic activity and stability were investigated in carbon dioxide reforming of methane (CRM) reaction at $800^{\circ}C$ The Ni/$SiO_2$ catalysts showed high stability as a result of confinement of Ni particles with a mean size of ~10 nm within the pores of $SiO_2$ support. Besides, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that the Ni nanoparticles were partially buried inside the $SiO_2$ support. The strong interaction between Ni and the $SiO_2$ support could also be advantageous for long-term stability of the catalyst. In case of the Ni/$TiO_2$/$SiO_2$ catalyst, it was found that the catalytic activity of 10 nm-sized Ni nanoparticles was not much influenced by $TiO_2$ addition.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.371-379
• /
• 2013

In order to improve the selective oxidation reaction of gaseous ammonia at a low temperature, various types of metal-impregnated activated alumina were prepared, and also physical and chemical properties of the conversion of ammonia were determined. Both types of metal (Cu, Ag) impregnated activated alumina show high conversion rate of ammonia at high temperature (over $300^{\circ}C$). However, at lower temperature ($200^{\circ}C$), Ag-impregnated catalyst shows the highest conversion rate (93%). In addition, the effects of lattice oxygen of the developed catalyst was studied. Ce-impregnated catalyst showed higher conversion rate than commercial alumina, but also showed lower conversion rate than Ag-impregnated sample. Moreover, 5 vol.% of Ag activation under hydrogen shows the highest conversion rate result. Finally, through high conversion at low temperature, it was considered that the production of NO and $NO_2$, toxic by-products, were effectively inhibited.

• 공업화학
• /
• 제5권1호
• /
• pp.30-36
• /
• 1994

가솔린 옥탄가 향상제인 ETBE(ethyl tert-butyl ether) 합성반응의 촉매활성과 촉매의 산특성에 상관성 및 반응특성에 관하여 연구하였다. pyridine의 흡착량과 TBA전화율은 좋은 상관성을 보였지만, $NH_3$의 흡착량과 TBA전화율은 전이금속과 complex를 형성하는 $NH_3$의 흡착특성 때문에, 전이금속의 경우는 선형적인 상관성을 나타내지 않았다. 담지촉매의 경우, 담지량에 따른 촉매활성과 생성물 분포는 반응물인 TBA 또는 iso-butene의 흡착특성이 중요한 역할을 하였다.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1681-1690
• /
• 1998

The aim of this paper is to investigate combustion characteristics of lean premixed mixture stabilized by catalytic surface reaction. The catalytic combustor consisted of a catalyst bed and a thermal combustor. The catalyst bed was made of two stage, Pd catalyst in the first stage and Pt catalyst in the second stage. Auto ignition of lean mixture took place in the thermal combustor. Ignition temperature was about $810{\sim}820^{\circ}C$ at the fuel-air ratio of 1.5~3.0 % and the mixture velocity of 11~18m/sec. The position of flame front in the thermal combustor moved toward back as preheat temperature increased and fuel-air ratio decreased. The f1ame supported by surface reaction was stabilized without any flame stabilizers. NOx emissions from the catalytic combustor were below 2.0 ppm ($O_2$ 15 %) when gas temperature was limited below $1350^{\circ}C$. This result demonstrates that NOx emission from the catalytic combustor is much low comparing with conventional combustors.

• 폴리머
• /
• 제29권4호
• /
• pp.321-330
• /
• 2005

1990년대에 우리나라의 폴리올레핀 산업이 급속히 성장하였으며, 이러한 석유화학 분야의 상업성은 올레핀 중합 촉매의 발전과 무관하지 않았다. 이러한 중합촉매의 연구개발에 대한 개괄적인 현황을 파악할 수 있도록, 현재 공업적으로 사용되고 있는 담지형 Ziegler-Natta촉매와 최근에 특수 grade의 폴리올레핀 제조에 도입되고 있는 메탈로센 촉매의 발전에 수반된 여러 관점의 연구 결과를 정리하였다. 또한 이들 새로운 중합촉매의 이용으로 고분자 신소재가 개발되었고, 촉매의 담지화 과정에서 얻은 연구결과가 고분자 나노복합체의 in-situ 제조에 응용될 수 있음을 보여 주었다.

• 한국대기환경학회지
• /
• 제6권1호
• /
• pp.31-42
• /
• 1990

In order to suggest an efficient catalyst systems for NOx reduction of flue gases from industrial boilers, $TiO_2$ supported $WO_3-V_2O_5, V_2O_5$ and $WS_2$ catalysts were tested for the performances of NOx reduction at high reactin temperature range (250-500$^\circ$C) using a simulated flue gas system. It was found that while the proposed $WO_3/TiO_2$ and $WO_3-V_2O_5/TiO_2$ catalysts showed a significant high NOx reduction efficiency at about 350-400$^\circ$C, the conventional commercial catalyst of $V_2O_5/TiO_2$ showed a significant drop in NOx reduction efficiency due to the excessive $NH_3$ oxidation. From the measurement of surface acidities of those catalysts, it was found that the acidity are well correlated with the activities of NOx reduction. The reason of high activity of $WO_3$ series catalysts at high reaction temperature seems due to the low value of surface excess oxygen compared with that of $V_2O_5/TiO_2$ seems equivalent to the acid site of that catalyst.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.464-469
• /
• 2021

A reforming catalyst for hydrogen production from ammonia is being studied. Non-novel metal based Ni catalysts for use in ammonia reforming processes are being developed. In this study, the ammonia reforming characteristics according to Ni content of the alumina pellet supported catalyst in the mid-temperature region were investigated under different space velocity. 20 Ni and 3,000 h^-1 showed the best catalytic activity with ammonia conversion of 63% among all conditions.