• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.165-180
• /
• 2019

Recently, the Korean government announced that it would focus on fostering intrapreneurship and corporate spin-off. The government encourages intrapreneurship because it ultimately seeks to develop industries and markets, grow innovative companies, and job creation. In particular, the government believes that enhancing intrapreneurship will reduce the personal fear of failures, expand open innovation by utilizing resources within existing companies related to innovation creation, and lead to new start-ups. Accordingly, this research reviewed the previous studies on corporate entrepreneurship activities and entrepreneurial self-efficacy and briefly looked at the status of global intrapreneurship activities. Based on the Global Entrepreneurship Monitor Adult Population Survey data in 2015, this study conducted a logistic regression analysis with the data of 27 OECD member countries' and Korean respondents. The finding confirms that the personal experience of intrapreneurship could be positively associated with entrepreneurial self-efficacy of the person. Therefore, it seems to be worth for the Korean government considering policies that support intrapreneurship as part of the start-up policy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.4
• /
• pp.109-120
• /
• 2020

This study examines how the government's fairness in entrepreneurship support affects satisfaction and management performance, and examines whether these influences are different for each growth stage of start-up companies. For this study, data were collected for start-up companies that received government support for start-up within the past 5 years. Total 611 copies of the data were used in this study. The collected data were analyzed using SPSS and AMOS. The fairness used in this study was divided into three types, procedural fairness, interactive fairness, and distributed fairness. The effect of the three fairness on the satisfaction of start-up support project was analyzed. In addition, the effect of business support satisfaction on business performance was analyzed, where the business performance was evaluated by the questioner's satisfaction with their business. The start-up phase was divided into the start phase, early growth phase, stagnant phase, and high-level growth phase, and the moderating effect between the fairness and satisfaction of the government-supported projects by start-up phase was analyzed. As a result, it was found that every concept of fairness had a positive (+) effect on the satisfaction of the entrepreneurship support project, and the satisfaction of the entrepreneurship support project had a positive (+) effect on the management performance. The concept of procedural fairness in the start phase, procedural fairness in the early growth phase, interactive fairness, and the concept of all fairness in the stagnant phase influenced the satisfaction of the start-up support project. In this study, the fairness and effect of government-supported projects affecting the management performance of start-ups were identified by growth phase of start-ups. The results of these studies will help build a systematic system for entrepreneurship support and for start-ups, it will also greatly contribute to finding differentiated growth plans by growth stages of start-up companies.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.109-118
• /
• 2005

The parameter design is the most emphasized measure by researchers for a new products development. It is critical for makers to achieve simultaneously in both the time-to-market production and the quality enhancement. However, there are difficulties in practical application, such as (1) complexity and nonlinear relationships co-existed among the system's inputs, outputs and control parameters, (2) interactions occurred among parameters, (3) where the adjustment factors of Taguchi's two-phase optimization procedure cannot be sure to exist in practice, and (4) for some reasons, the data became lost or were never available. For these incomplete data, the Taguchi methods cannot treat them well. Neural networks have a learning capability of fault tolerance and model free characteristics. These characteristics support the neural networks as a competitive tool in processing multivariable input-output implementation. The successful fields include diagnostics, robotics, scheduling, decision-making, prediction, etc. This research is a case study of spherical annealing model. In the beginning, an original model is used to pre-fix a model of parameter design. Then neural networks are introduced to achieve another model. Study results showed both of them could perform the highest spherical level of quality.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.658-664
• /
• 2020

Zeolite HY is wet impregnated with Ni (0.1, 0.3, 0.4, 0.5 wt%), Pt (0.1 wt%) and reduced in presence of hydrogen to form nanosized particles of Ni and Pt. All the catalysts were characterized by XRD, TEM, ESCA, NH₃-TPD, Pyridine adsorbed FT-IR and BET. Characterization results confirm that the Ni and Pt fractions effectively rehabilitated the physio-chemical properties of the zeolite HY catalysts. Further, all the reduced catalyst were screened with hydroisomerization of m-xylene at LHSV = 2.0 h^-1 in the temperature range 250-400 ℃ in steps of 50 ℃ in hydrogen atmosphere (20 ml/g). The addition of Ni to Pt catalyst increases hydroisomerization conversion, as well as maximizes p-xylene selectivity by restricting the pore size. The increasing trend in activity continues up to 0.3 wt% of Ni and 0.1 wt% Pt addition over zeolite HY. The increasing addition of Ni increases the total number of active metallic sites to exposed, which increases the metallic sites/acid sites ratio towards the optimum value for these reactions by better balance of synergic effect for stable activity. The rate of deactivation is pronounced on monometallic catalysts. The results confirm the threshold Ni addition is highly suitable for hydroisomerization reaction for product selectivity over Ni-Pt bimetallic/support catalysts.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2015

Recently, Stirling engines are emerging as a key device for power conversion of renewable energy or waste energy. This study develops a LTDSE(Low Temperature Differential Stirling Engine) using a water spray for higher heat transfer and performs load performance tests for various flow rates and temperatures of hot water spray for variable engine loads emulated by a mechanical friction device. Internal temperature and pressure, working frequency and inlet and outlet temperature of the supply water are measured. As a result, the increases in flow rate and temperature of hot water respectively enhance the power output, efficiency and the working frequency, while the increasing engine load leads to decreases in working frequency but increases in the pressure amplitude. Eventually, it is revealed there exists a maximum shaft power of the test engine.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.491-499
• /
• 2021

Batteries are widely used for energy storage, such as ESS(Energy Storage System), electric vehicles, electric aircraft, and electric powered ships. Among them, a submarine uses a high power battery for an energy storage. When the battery of a submarine is discharged, a diesel generator generates AC power, and then AC/DC power converter change AC power to DC power for charging the battery. Therefore, in order to lower the current capacity of the diesel generator, it is necessary to use an AC/DC converter with a high input power factor. And, a power converter with a large power capacity must have high stability because it can lead to a major accident when a failure occurs. However, the control algorithm using the traditional PI controller is difficult to satisfy stability and dynamic characteristics. In this paper, we design the high power AC/DC converter with high input power factor for battery charging systems. And, we propose a stable control algorithm. The validity of the proposed method is verified through simulation and experiments.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.235-259
• /
• 2014

New product or new technology developments are directly linked to a firm's survival and thus their performance and improvement are gaining attention in the midst of rapidly changing business environment and aggravating competition. However, despite SMEs' significance in the national economy, they are limited in terms of size and resources in possession, so the government provides a variety of supports as a policy. According to a study on the organizational life cycle, a firm's limits and difficulties differ by growth stage, so the supports need to be tailored. Based on the data from 2,575 firms that responded to the "2011 SMEs Technological Statistics," how technological capability level and deviation in the R&D process affect the R&D sales performance was studied. The result of analysis revealed that the technological capability has a positive impact on the R&D sales performance. It was also learned that the relationship between deviation in the technological capability and R&D sales performance was moderated by the government support. For the hypothesis that the government support would have a different moderating effect by growth stage for the impact the technology level has on the R&D sales performance, the empirical analysis showed a different meaningful moderating effect for each growth stage. The theoretical implications of the study are that, instead of a simple relation of dynamics that does not take the growth stages into account, it suggested a more realistic causal relationship model that reflects the complex environment the SMEs are in and that the need for measuring and using the deviation in technological capability as a research variable has been justified. The practical implications are that the government policy for supports can be tailored to a growth stage and that the guidelines have been suggested to effectively use the government funding by encouraging the SMEs in a different growth stage to adapt to the customized policy.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.127-136
• /
• 2022

As technological development continues, platforms with more diverse structures are emerging. Existing research predicts that a new structure based on technology and innovation will affect the two-sided market. This study evaluated the decentralized identifier (DID) platform, a new platform based on blockchain technology, of the importance of this platform from the perspective of the two-sided market. Using the Analytic Network Process, IT, platform, and blockchain experts conducted a dual comparison survey. Data with a consistency ratio value of 0.1 or less were selected and analyzed for 12 data. The research results showed the importance of service quality, policy support, openness, and uncertainty. This study is expected to be used to support the development of strategic decision-making for blockchain and DID platform-based business companies.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.2
• /
• pp.219-233
• /
• 2010

In this study, the possibility of the application of knowledge management concept in a unit of regional industrial cluster is explored based on diverse case studies. For this purpose, a new framework for knowledge management strategies in an industrial cluster was developed and a model of Knowledge Hub was suggested for the support of integrated knowledge management in an industrial cluster. Additionally, characteristics of Knowledge Hub that should be considered in the design of the Hub are discussed. The concept of Knowledge Hub in this study could be particularly useful for the promotion of innovations in linking clusters and provincial industrial clusters.