• 한국표면공학회지
• /
• 제47권3호
• /
• pp.137-146
• /
• 2014

The important drawback of epoxy electrodeposition(ED) coatings is the lack of the weathering resistance caused by the structure of bisphenol A. To improve this yellowing phenomena, acryl ED coatings have been developed. Compared with the epoxy ED coatings, however, acryl ED coatings are relatively weak in the corrosion resistance and mechanical properties. The purpose of this study is complemented their drawbacks by mixing epoxy and acryl ED paints. The salt spray, accelerated weathering test(QUV) and cupping, bending, impact test were employed to investigate the corrosion resistance, weathering resistance, and mechanical properties of ED coatings. When the ratio of acryl to epoxy resin of ED coating is 0.33, the weathering resistances are appropriately improved in condition maintaining the corrosion resistance. It was shown that the weathering resistance for epoxy ED coating was adjusted by optimally mixing acryl ED paint.

• 지역사회간호학회지
• /
• 제33권4호
• /
• pp.456-464
• /
• 2022

Purpose: The purpose of this study was by understanding the correlation between the depression, social support and self-care of tuberculosis patients and by identifying the factors that influence the self-care. Methods: The study subjects were 119 outpatients who were diagnosed with pulmonary and respiratory tuberculosis at a university hospital in D city. The survey questions measured depression, social support, self-care. Using the SPSS/WIN 23.0 program, the collected data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlations and multiple regression analysis. Results: As a result of correlation analysis, there was a statistically significant negative correlation between self-care and depression (r=-.53, p<.001), and there was a significant positive correlation between self-care and social support (r=.68, p<.001). Factors affecting self-care of the subjects were social support (β=.51, p<.001), depression (β=-.32, p<.001), drug discontinuation experience (β=-.30, p<.001) and drug resistance (β=-.14, p<.001). These factors explained 62% of the variance. Conclusion: In order to improve the self-care ability of tuberculosis patients, it is necessary to develop education and nursing intervention programs that can lower patients' depression and strengthen social support.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.127-137
• /
• 2020

In this study, a MWCNT(multi-wall carbon nanotube) was added to polysulfone(PSf) support layer to improve flux of TFC(thin film composite) RO(reverse osmosis) membrane. Two different kinds of MWCNT were used. Surfaces of some MWCNTs were modified hydrophilically through acid treatment, while those of other MWCNTs were modified through heat treatment to maintain their hydrophobicity. MWCNT/PSf support layer was prepared by adding PSf to the NMP mixed solvent containing 0.1 wt% MWCNTs using a phase inversion method. The surface porosity of the MWCNT/PSf support increased by 42~46% while its surface pore size being maintained. The TFC RO membrane made of MWCNT/PSf support layer showed a 20% flux increase while its salt rejection characteristics is sustained. In addition, the MWCNT/PSf support layer has better mechanical stability than the PSf support layer, there resulting in an increased resistance of flux reduction due to physical pressure.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.70-78
• /
• 2005

In this paper, a novel rotor flux estimation method of an induction motor using support vector regression(SVR) is presented. Two well-known different flux models with respect to voltage and current are necessary to estimate the rotor flux of an induction motor. Training of SVR which the theory of the SVR algorithm leads to a quadratic programming(QP) problem. The proposed SVR rotor flux estimator guarantees the improvement of performance in the transient and steady state in spite of parameter variation circumstance. The validity and the usefulness of proposed algorithm are throughly verified through numerical simulation.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.62-68
• /
• 2016

A simple calculation tool for added resistance in waves is developed to utilize for initial design or embedded module for navigation support system. In order to select an appropriate calculation method for added resistance in waves, three methods (drift method, integrated pressure method, radiated energy method) based on strip method are applied to Wigley I and KVLCC2. The methods for added resistance in waves give the underestimated results because it is difficult to consider nonlinear effects due to reflected wave. We apply asymptotic (Faltinsen's method) and empirical formula (NMRI's method) to improve the accuracy for short wave length region. In comparison with experimental results, the combination of radiated energy method and short wave correction method of NMRI is the most reasonable. However, a simple sum of results calculated by two methods gives rise to the overestimation of added resistance for short wave length region because added resistance of radiated energy method exits in total reflection region. To overcome this problem, modified radiated energy method is proposed using correction coefficient defined by reflection coefficient of NMRI's method. Finally, added resistance in regular waves is composed of added resistance of modified radiated energy method and that of short wave correction method of NMRI. Estimated added resistance in regular waves is validated by comparison with experimental results of other research groups.

• Steel and Composite Structures
• /
• 제35권4호
• /
• pp.509-525
• /
• 2020

Steel-concrete composite slabs with profiled steel sheeting are widely used in the execution of floors in steel and composite buildings. The rapid construction process, the elimination of conventional replaceable shuttering and the reduction of temporary support are, in general, considered the main advantages of this structural system. In slabs with the spans currently used, the longitudinal shear resistance commonly provided by the embossments along the steel sheet tends to be the governing design mode. This paper presents an innovative reinforcing system that increases the longitudinal shear capacity of composite slabs. The system is constituted by a set of transversal reinforcing bars crossing longitudinal stiffeners executed along the upper flanges of the steel sheet profiles. This type of reinforcement takes advantage of the high bending resistance of the composite slabs and increases the slab's ductility. Two experimental programmes were carried out: a small-scale test programme - to study the resistance provided by the reinforcing system in detail - and a full-scale test programme to test simply supported and continuous composite slabs - to assess the efficacy of the proposed reinforcing system on the global behaviour of the slabs. Based on the results of the small-scale tests, an equation to predict the resistance provided by the proposed reinforcing system was established. The present study concludes that the resistance and the ductility of composite slabs using the reinforcing system proposed here are significantly increased.

• 농촌지도와개발
• /
• 제22권1호
• /
• pp.43-54
• /
• 2015

This study explored the effects of adoption of innovation and resistant attitude on farmers' perspectives and also was deigned for developing prompt spread of ICT and facilitating stronghold support center in the convergence agricultural field. To closely examine the variation for exploitation intent of stronghold support center in the ICT convergence agriculture, 110 farmers who had experienced introduction for ICT hybrid environmental control system were participated in the study using the questionnaire. The results revealed the several findings. Firstly, there was no significant differences between the self-efficacy such as confidence of application technology for farmers and adoption of innovative technique (p=.075). Secondly, suitability of using ICT hybrid environmental control system showed a significant difference in the adoption of innovation (p=2.750) while complexity of using ICT hybrid environmental control system indicated the negative effects on the adoption of innovation (p=3.591). Thirdly, introduction cost of ICT hybrid environmental control system showed the negative effects in the adoption of innovation (p=2.278), whereas adoption of innovation indicated a significant difference in the stronghold support center in the convergence agricultural field (p=5.500). Finally, resistance of ICT adoption of innovative technique revealed the negative effects on the stronghold support center in the ICT convergence agriculture. This study, therefore, demonstrated that educational assistance for acquiring ICT technique, suggestion of influences for productivity, and development for skills were needed to extend ICT convergence technology. Additionally, the study indicated the strategies related with promotion as well as ways of minimizing introduction cost.

• Steel and Composite Structures
• /
• 제44권6호
• /
• pp.769-788
• /
• 2022

In this paper a mathematical model for the prediction of the fire resistance of slim-floor steel beams based on an Artificial Neural Network modeling procedure is presented. The artificial neural network models are trained and tested using an analytical database compiled for this purpose from analytical results based on FEM. The proposed model was selected as the optimum from a plethora of alternatives, employing different activation functions in the context of Artificial Neural Network technique. The performance of the developed model was compared against analytical results, employing several performance indices. It was found that the proposed model achieves remarkably improved predictions of the fire resistance of slim-floor steel beams. Moreover, based on the optimum developed AN model a closed-form equation for the estimation of fire resistance is derived, which can prove a useful tool for researchers and engineers, while at the same time can effectively support the teaching of this subject at an academic level.

• 생명과학회지
• /
• 제18권11호
• /
• pp.1612-1616
• /
• 2008

심폐지구력은 질병, 장애, 수명 등과 연관된 중요한 건강 지표이다. 지구성 운동이 대개 심폐지구력향상을 위한 방법으로 알려져 있는 반면 대부분의 저항성 운동은 심폐지구력향상을 위한 좋은 방법으로 고려치 않고 있다. 그러나, 짧은 휴식기간을 가진 저 강도 혹은 중간 강도의 저항성운동은 특히 노인들이나 관상동맥질환을 가진 환자들의 심폐지구력향상에 도움을 줄 수 있을 것이다. 본 총설은 지구성운동과 저항성운동 시의 생리학적변화를 이해하고, 저항성운동이 심폐지구력향상에 도움을 줄 수 있다는 사실을 이론적으로 뒷받침하고자 한다.

• Elastomers and Composites
• /
• 제53권1호
• /
• pp.13-18
• /
• 2018

A face seal comprising a metal ring and acrylonitrile butadiene rubber (NBR) was installed in the driving part and suspension unit. The seal serves as a bearing and simultaneously prevents entry of foreign matter from external environment as well as internal oil leakage. Subsequently, the rubber-rod ring generates axial pressure owing to rubber elasticity (hardness), performs static sealing function between housing details and outer diameter of seal, and transmits rotational torque to the rotating support ring. In order to improve the durability of NBR, which performs the above tasks, and to effectively use it in tracked-vehicle applications at extreme temperatures, this study reports a mixing design approach to enhance cold and oil resistances of NBR.