• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.47-56
• /
• 2012

Bicycle has a large amount of kinetic energy available for energy harvesting technology in its speedy and balanced riding movement. Systematic and realistic analysis of its dynamic property is essential to improve the efficiency of energy harvester. However, there has not been enough researches about precise measurement or analysis of bicycle dynamics on real roads. This study aims to investigate the characteristics of vibrational movement of bicycle using MEMS-based accelerometer and to develop a prototype of electromagnetic energy harvester with nonlinear behavior which is proper to the random vibrations accompanied in bicycle riding. The vibrational components have average magnitude of 1 g and turn out to be independent of riding speed. The developed prototype of energy harvester was installed on a front port of a bicycle to use this ambient vibration and generated an average electrical power of 1.5 mW which is enough to support power for most of portable sensors and short range radio-frequency communication. Further study about isolation of vibration from a rider and conversion efficiency is ongoing. The developed energy harvester is expected to be a platform technology for sustainable portable power supply for various smart IT devices and applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.775-778
• /
• 2015

HTML5-based Web platform is established as a next-generation national standards, Web services provider, has been competitively develop support technology HTML5-based app in smart media devices and smart TV. In accordance with the W3C is an international Web standards development organization, Microsoft, Apple, Mozilla, Google, such as Opera, various Web browser vendors are participating in standardization. Gradually emphasized the importance of HTML5, HTML5 -based Web pages, it is necessary to fast load times when contained a large amount of information. Therefore, in this paper, the initial studies in order to reduce the loading time of a web page, configure each browser-specific same Web page, and measure the initial loading time. Also, one by one remove the HTML5 tags, and CSS property, to analyze the tags and attributes of the account for a large proportion to the initial load time. Through the results, it is desired to provide a process which can reduce the Web page.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.201-209
• /
• 2020

In this paper, we perform a case study of children's emotional care program that analyzes the emotional status through the drawings of children based on web system. In order to overcome spatial and temporal environment constraints, we have developed based on web system that performs to support the whole process from the request of analysis of children 's drawings to the feedback of the final result step by step. The online platform is designed to conduct observations for the purpose of primary screening using a smartphone, and then proceed to the offline secondary care linkage process based on the results. Then according to the results of the analysis, children and parents who need deep examination are figured out and professional institutions are linked to them for help. Parental stress had been analyzed to improve the accuracy of the test and to figure out the cause of the problem. The study was conducted on 2,532 children and their parents between the ages of 3 and 5 years attending a day care center. As a result, 564 children and 223 parents were figured out to be in need of secondary institutional care, and 311 parents were educated and counseled from the professional institutions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.383-390
• /
• 2019

A helideck is one of the essential structures in offshore platforms for the transportation of goods and operating personnel between land and offshore sites. As such, it should be carefully designed and installed for the safety of the offshore platform. In this study, a structural design optimization method for a lightweight offshore helideck is developed based on a genetic algorithm and an attainable design set concept. A helideck consists of several types of structural members such as plates, girders, stiffeners, trusses, and support elements, and the dimensions of these members are typically pre-defined by manufacturers. Therefore, design sets are defined by collecting the standard section data for these members from the American Institute of Steel Construction (AISC), and integer section labels are assigned as design variables in the genetic algorithm. The objective is to minimize the total weight of the offshore helideck while satisfying the maximum allowable stress criterion under various loading conditions including self-weight, wind direction, landing position, and landing condition. In addition, the unity check process is also utilized for additional verification of structural safety against buckling failure of the helideck.

• Journal of Environmental Policy
• /
• v.14 no.3
• /
• pp.75-94
• /
• 2015

The purpose of this study is to analyze the major issues discussed among Parties and provide a framework for predicting the agreements on those issues, prior to the final negotiation on a new legally-binding agreement on climate change adaptation in the United Nations Framework Convention on Climate Change (UNFCCC). The analyses of documents, adaptation actions, and work of the Ad Hoc Working Group on the Durban Platform for Enhanced Action (ADP) under the UNFCCC informed that the adaptation issue has primarily been focused on the support of developed country Parties for the adaptation of developing country Parties following the principle of the Convention, Common but Differentiated Responsibilities and Respective Capabilities (CBDR-RC). Three-year work of the ADP acknowledged the major issues on adaptation in the new climate agreement, which would be categorized as long-term and global aspects, commitments/contributions/actions, monitoring and evaluation, institutional arrangements, and loss and damage. A final agreement on each issue could be predicted by setting a zone of possible agreement in-between the two extremes of developing and developed country Parties and considering three major elements affecting the Parties' positions, national priority, adaptation action, and social expectation, which are proposed in this study. The three major elements should be considered in a balanced manner by Parties to draw a durable agreement that will enhance global adaptation actions from a long-term perspective. That is, the agreement needs to reflect adaptation actions occurring outside the Convention as well as social expectations for adaptation. It is expected that the new agreement on climate change adaptation, from a long-term and global perspective, would be an opportunity to reduce vulnerability and build resilience to climate change by incorporating global expectations.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.68-78
• /
• 2020

Crop models have been used to predict vegetable crop yield, which would have a considerable economic impact on consumers as well as producers. A small number of models have been developed to estimate growth and yield of vegetables due to limited availability of growth observation data in high-quality. In this study, we aimed to analyze the protocols designed for collection of the observation data for major vegetable crops including cabbage, radish, garlic, onion and pepper. We also designed the protocols suitable for development and verification of a vegetable crop growth model. In particular, different measures were proposed to improve the existing protocol used by Statistics Korea (KOSTAT) and Rural Development Administration (RDA), which would enhance reliability of parameter estimation for the crop model. It would be advantageous to select sampling sites in areas where reliable weather observation data can be obtained because crop models quantify the response of crop growth to given weather conditions. It is recommended to choose multiple sampling sites where climate conditions would differ. It is crucial to collect time series data for comparison between observed and simulated crop growth and yield. A crop model can be developed to predict actual yield rather than attainable yield using data for crop damage caused by diseases and pests as well as weather anomalies. A bigdata platform where the observation data are to be shared would facilitate the development of crop models for vegetable crops.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.36-45
• /
• 2011

The recovery of platinum group metals (PGMs) from the leach solution of spent auto-catalyst and the wash solution of the leach residue was investigated in the laboratory scale experiments by the cementation process using metal powders as the reductant. In this study, the effect of Al, Mg and Zn powders on the cementation process was particularly examined. Aluminum powder was selected as the most suitable reductant for the cementation of PGMs. At the cementation time of 10 minute under the aluminium stoichimetric amount of 19.3 and the reaction temperature of $50{\sim}60^{\circ}C$, the recovery of platinum group metals from the leach solution of the spent auto-catalyst was found to be 99.3%, 99.4%, 90.2% for Pt, Pd and Rh, respectively. Under the same conditions with the aluminium stoichimetric amount of 45, the recovery of platinum group metals from the wash solution of the leach residue of spent catalyst was observed to be 97%, 97% and 90% for Pt, Pd and Rh, respectively. In addition, it was possible to upgrade the platinum group metals in the precipitates obtained from the cementation process by about 10% through the removal of metal impurities by the nitric acid leaching at ambient temperature.

• Review of Culture and Economy
• /
• v.21 no.1
• /
• pp.21-61
• /
• 2018

Most of the Korean performing arts markets are not only small but also show their limitations in terms of their role as a platform for the promotion of performing arts and future growth prospects. This study started from the perception that the domestic performing arts markets need the cooperation between the markets in order to overcome the current situation and become the representative performing arts markets of Asia. To do this, we conducted surveys and in-depth interviews on market collaborations with domestic performing arts officials such as PAMS, Jeju Haevichi Art Festival and G-FAFE. For successful inter-market collaboration, the first is to change ideas and thinking about collaborations, second, to select programs suitable for direct supervision and collaboration based on evaluation of comparative advantage, and third, to establish and operate the 'Performing Arts Market Collaboration Promotion Committee(tentative name)'. And the fourth, starting from the sharing of the network that is most required at this stage, it is necessary to develop the sharing of manpower and places through mutual financial support or sharing between the central government, the metropolitan municipalities.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.115-126
• /
• 2014

In order to improvement of the perceptive of health state and the motivation, this study suggests the ways and design forms which provide PHR information customizing individual attributes as well as guidelines through a decision support system and services which integrate medical information visualization. Expression methods using the color, form, position in order to visualization based on images improved performance of information awareness by changing radar chart from existing information which provide only numerical figure. The methods providing a graphic figure which seems like beads of blood which shows the result of blood tests would also arise patient's attention. They gives the patient's information which is able to compare their health status and normal status and visualizes the records as a human figure in order to perceiving their status as well. The visualization showing the position of human body figures marks in inspection elements located in position of relevant organs. The method also uses icons represent examination results so they improve attention of the results and shorten recognize times.