• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.169-175
• /
• 2022

In this study, envisioned a laboratory equipped with virus blocking equipment for chest X-ray examinations of respiratory or droplet-transmitted virus-infected patients, and the material with the least deterioration in X-ray output and image quality among the proven blocking materials that block viruses in the design process. and experimented to find the thickness. As a result, when 1 cm of acrylic was applied, the X-ray output was reduced by only about 3.27 % compared to the absence of the barrier material, the SNR was 40.7 and CNR was 30.9, which was the best. The SSIM index result was analyzed as 0.891, which was analyzed to be implemented as the most similar image compared to the original image. The barrier material applied in the research method was objective in that it used a product approved by the Ministry of Food and Drug Safety. the results of this study are expected to provide useful information when installing X-ray examination facilities for the diagnosis and treatment of respiratory-related virus-infected patients in the future.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.173-183
• /
• 2023

Purpose: In order to reduce industrial accidents caused by forklift trucks, it is actually necessary to analyze the causes of accidents. This study aims to present disaster prevention measures by analyzing accident cases by forklift accident type. Method: For the analysis of industrial accidents, including serious industrial accidents caused by forklifts from 2021 to 2022, accident statistics from the Korea Occupational Safety and Health Agency were used to analyze accidents in four types. Result: In the last two years, the total number of victims, including deaths and other serious injuries, was 2,559, which was 1,396 in 2021 and 1,163 in 2022. Disaster prevention measures were presented for industrial accidents by size and occurrence type of equipment that cause serious industrial accidents in which more than 1,000 people are injured annually. Conclusion: It is necessary to expand the number of workers subject to the forklift financial support project to less than 100. It is necessary to amend the proviso on boarding restrictions in Article 86, Paragraph 7 of the ｢Regulations on Industrial Safety and Health Standards｣. It is mandatory to install front and rear cameras. It is necessary to install driving-linked safety belts. It is necessary to install line beams obligatory. It is necessary to expand the subject of forklift special safety and health education to workplaces that have more than one forklift truck, and it is necessary to redesignate the training hours to 16 hours every year.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.574-587
• /
• 2022

This study was performed to development the alternative farrowing pen (AFP) and to investigate performance and behavior of lactating sows and their litter. A total of 64 multiparous sows were randomly divided into two groups and were allocated to farrowing crates (FCs) and AFPs. The AFPs contained a crate and support bars that could be folded to provide the sows with extra space on day 5 postpartum. Behavior was recorded by charge-coupled device cameras and digital video recorders, and the data were scanned every 2 min to obtain an instantaneous behavioral sample. Farrowing systems did not affect feed intake, back-fat thickness, litter size and piglet weight at birth and weaning (p > 0.05). In addition, there were no differences in the number of crushed piglets between the two farrowing systems (p > 0.05). However, the weaning-to-estrus interval was shorter in the sows of the AFPs than in thous of the FCs (p < 0.05). The sows spent most of their time lying down during the lactating period, at about 80% lateral recumbency and 10%-15% ventral recumbency. The only significant differences were in the feeding and drinking behavior between sows in the two farrowing systems (p < 0.05). The FC sows displayed more feeding and drinking behavior than the AFP sows, especially in the late lactating period (p < 0.05). Piglets in the FCs tended to spend more time walking than piglets in the AFPs (p < 0.05), whereas there were no differences in suckling and lying behavior between piglets in the two farrowing systems (p > 0.05). It is concluded that the AFPs with temporary crating until day 4 postpartum did not negatively affect performance and crushed piglet compared with the FCs. It also may improve animal welfare by allowing sows to move and turn around during the lactating period. Further research is needed to find suitable housing designs to enhance productivity and animal welfare.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.125-135
• /
• 2023

In South Korea, it has been increased the necessity of supplying housing services to meet the needs and desires of various residents by reflecting various demographic and social changes. In particular, various smart device has been widely utilized in South Korea and the smart technologies, such as artificial intelligence and the Internet of Things has been developed rapidly. These smart technologies could support smart housing that allows residents to easily and comfortably employ residential services. However, it is necessary to improve the awareness of users in order to spread the smart housing residential services connected to smart technologies. For this reason, this study observed changes in users' perceptions of smart housing residential service technology using Living Lab. As a result, after experiencing the Living Lab, users' awareness of smart housing housing service increased, and it was observed that the preferred housing service technology was more detailed than before the Living Lab experience. This study shows that it is important to raise users' awareness for the dissemination of smart housing residential service technology, and that Living Lab can be an effective means for this purpose.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.44-54
• /
• 2023

In order to manufacture functional and esthetic prostheses, it is essential to accurately transmit information about the patient's occlusal plane. In particular, in the case of a completely edentulous patient, the occlusal plane is very important to correctly support the soft tissue, to achieve aesthetic harmony with the facial appearance, and to properly pronounce it, and to form a balanced occlusal relationship for stable mastication. In the conventional method, various facebow systems were used to transmit patient's information from the clinic to the laboratory, but there were several limitations in the process of transferring them to CAD. To simplify this process, a prefabricated POP (PNUD Occlusal Plane) Bow system was recently developed. In this case, a CAD-CAM (Computer-aided design-computer-aided manufacturing) treatment dentures reflecting the patient's occlusal plane information was manufactured using the POP Bow system during the treatment of a completely edentulous patient, and aesthetic and functional satisfaction was obtained.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.93-98
• /
• 2022

Information service technology continues to develop, and information service continues to expand based on the IT convergence trend. The premeter-based security model chosen by many organizations can increase the effectiveness of security technologies. However, in the premeter-based security model, it is very difficult to deny security threats that occur from within. To solve this problem, a zero trust model has been proposed. The zero trust model requires authentication for user and terminal environments, device security environment verification, and real-time monitoring and control functions. The operating environment of the information service may vary. Information security management should be able to response effectively when security threats occur in various systems at the same time. In this study, we proposed a security policy distribution system in the object reference method that can effectively distribute security policies to many systems. It was confirmed that the object reference type security policy distribution system proposed in this study can support all of the operating environments of the system constituting the information service. Since the policy distribution performance was confirmed to be similar to that of other security systems, it was verified that it was sufficiently effective. However, since this study assumed that the security threat target was predefined, additional research is needed on the identification method of the breach target for each security threat.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.479-489
• /
• 2022

In order to understand how to increase the use of virtual training content at K University's online lifelong education institute, this study examined the use experience, content recognition, field practice replacement, and requirements, focusing on the examples of operating institutions. To this end, 12 institutions that operated virtual training contents distributed by the K University Online Lifelong Education Center in 2020 were selected for in-depth interviews and qualitative analysis was conducted on the interviews of 11 institutions. As a result of the analysis, first, the experience of using the contents of the virtual training operating institution was aimed at changing the educational environment, supplementing theoretical learning, and improving the sense of practice. Second, according to a survey on the recognition of virtual training content, if the importance and utilization of the content are high, it can be replaced by on-site practice in non-face-to-face classes, such as experiences of facilities and equipment, attracting interest and attention. Third, in many cases, the perception of replacement for field practice is not unreasonable to use as a pre-training material for field practice, but it is difficult to replace field practice. Fourth, content quality improvements can be summarized as content quality improvement, content access and manipulation improvement, dedicated device development, training for instructors, and curriculum systematization. Fifth, institutional requirements include improving the quality of virtual training content itself, equipment support, curriculum systemization and characterization, systematic curriculum and detailed content sharing, detailed guidance on using virtual training content, introducing how to use content, and recruiting instructors. This study is meaningful in that it sought ways to improve the utilization of virtual training content based on the perception of virtual training content operating institutions.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.6
• /
• pp.243-250
• /
• 2024

Biomimetic robots, which emulate characteristics of biological entities such as birds or insects, have the potential to offer a tactical advantage in surveillance and reconnaissance in future battlefields. To effectively utilize these robots, it is essential to develop technologies that emulate the wing flapping of birds or the movements of cockroaches. However, this effort is complicated by the challenges associated with securing the necessary hardware and the complexities involved in software development and validation processes. In this paper, we presents the design and implementation of a multi-HILS based biomimic robot software validation testbed using modeling and simulation (M&S). By employing this testbed, developers can overcome the absence of hardware, simulate future battlefield scenarios, and conduct software development and testing. However, the multi-HILS based testbed may experience inter-device communication delays as the number of test robots increases, significantly affecting the reliability of simulation results. To address this issue, we propose the data distribution service priority (DDSP), a priority-based middleware. DDSP demonstrates an average delay reduction of 1.95 ms compared to the existing DDS, ensuring the required data transmission quality for the testbed.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.47-53
• /
• 2024

Purpose : This study investigated the effects of concentric and eccentric contractions on muscle strength using an isokinetic dynamometer (ID) in college students in their 20s. It aimed to understand the impact of differences between the dominant and non-dominant sides on strength asymmetry and to elucidate the clinical implications of these differences to establish an appropriate posture and environment for patients. Methods : The experiment was conducted with 30 healthy adult participants. Prior to the experiment, participants underwent a warm-up targeting the shoulders, and efforts were made to eliminate factors that could potentially influence the measurement results. Subsequently, the maximum safe range of motion of shoulder joint abduction, extension, and flexion was measured using an isokinetic muscle function testing device. Muscle strength was assessed using concentric and eccentric contractions alternating between the dominant and non-dominant sides, and paired sample t-tests were used for the analysis. Results : There was no significant difference between bilateral peak torques for eccentric contraction in shoulder joint abduction, extension, and flexion (p>0.05). There was also no significant difference between bilateral peak torques for concentric contraction in shoulder joint abduction, extension and flexion (p>0.05). Conclusion : This study found no statistically significant difference in muscle strength between the dominant and non-dominant sides during concentric and eccentric contractions. However, previous studies have shown significant differences between the dominant and non-dominant sides during eccentric and concentric contractions during internal shoulder rotation in the general population, as well as significant differences in the upper trapezius muscle. Therefore, further research is needed to support the application of different intensities for bilateral muscle strengthening exercises in clinical practice.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.221-227
• /
• 2024

This paper presents a smartphone-attachable vascular compliance monitoring module. The proposed sensor module measures photoplethysmogram (PPG) and reconstructs an accelerated PPG waveform. The feature points are extracted from the accelerated PPG waves, and vascular compliance is estimated using these extracted features. The module is powered via the smartphone's USB terminal and transmits the acquired waveforms along with vascular compliance values through Bluetooth. The transmitted waveforms and vascular compliance value are displayed through the smartphone application. This work proposes an assessment method for consistency of PPG instrumentation, and it was implemented in a processor of sensor module. The proposed sensor module can be easily attached to smartphone that does not support PPG instrumentation, providing simple measurment and numerical analysis of vascular compliance. To verify the performance of the implemented sensor module, we acquired vascular compliance and pulse pressure data from 29 subjects. Pulse pressure, which serves as a representative indicator of vascular compliance, was obtained using a commercial blood pressure monitor. The analysis results showed that the Pearson coefficient between vascular compliance and pulse pressure was 0.778, confirming a relatively high correlation between two metrics.