• 한국해양공학회지
• /
• 제26권4호
• /
• pp.23-29
• /
• 2012

Korea has maritime jurisdiction over an area 4.5 times larger than the nation's inland area, but negotiations with surrounding nations on the maritime boundary delimitation have still not been completed satisfactorily. In particular, maritime boundary delimitation has become an important issue in terms of maritime security and resource exploration. Considering national interests, the delimitation of the maritime boundary is essential. However, no system to help the decision-makers involved in maritime boundary delimitation has yet been systematically constructed. Therefore, the aim of this study was the development of a system to support such decision-making. In this study, considerations related to maritime boundary delimitation were investigated through expert advice and international precedents. Based on these considerations, data were collected from several organizations, and a spatial database was systematically constructed. Finally, MBDSS (maritime boundary delimitation support system) was developed to support maritime boundary delimitation. This GIS-based system provides visual information about the considerations for the maritime boundary delimitation. Thus, it could help decision-makers to choose appropriate boundaries during the negotiation. Furthermore, this system is expected to be utilized as a scientific tool on the delimitation of maritime boundaries.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.251-254
• /
• 2006

본 논문은 multiclass 문제에서 기존에 나와 있는 fuzzy support vector mahchines 이 decision boundary 를 설정하는데 있어 모든 훈련 데이터에 대해서 바람직한 decision boundary 를 만들지 못하므로 그러한 경우를 예로 제시한다. 그리고 그에 대한 개선점으로 밀도를 이용해 decision boundary 를 조정하여 기존 FSVM 의 decision boundary 보다 더 타당한 decision boundary 를 설정하는 것을 보인다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.212-217
• /
• 1998

Reynolds equation, which describes behavior of fluid film in journal bearing, basically satisfies mass conservation. But, boundary conditions usually used with this equation, e.g. half Sommerfeld or Reynolds boundary conditions, cannot fulfill this natural law of conservation. In the case of connecting rod bearing, where applied load is dynamic and its magnitude is relatively large, such unrealistic boundary conditions have serious influence on calculation results, especially on lubricant flow rate or power dissipation which are important parameters in thermal analysis. Another important factor in the analysis of connecting rod bearing is elastic deformation of bearing support structure which is relatively flexible. In this paper, EHL analysis of connecting rod beating is performed using mass-conserving boundary condition. Elastic deformation of bearing support structure and application of mass-conserving boundary condition have significant effects on the performances of connecting rod bearing.

• Management Science and Financial Engineering
• /
• 제18권1호
• /
• pp.49-53
• /
• 2012

A novel method of transient stability analysis is presented in this paper. The proposed method extracts data points near the basin-of-attraction boundary and then builds a support vector machine (SVM) model learned from the generated data. The constructed SVM classifier has been shown to reduce dramatically the conservativeness of the estimated basin of attraction.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2001

Even though there is a guideline for the required strength of pipe support in inspection, it does not mean the nominal strength which can be used for the form work design. And, Concrete Specification defines that the pipe support should be designed according to the steel design guidelines but the design details are not provided, such as buckling length and the sectional modulus, etc. For the better prediction of strength of pipe support, the slenderness ratio of support which reflects the boundary condition should be considered. In this paper, the elastic buckling formula based on the slenderness is derived. The formula contains the strength reduction factor that consider the strength deduction caused by initial lateral deformation and is 0.65 consistently regardless of boundary conditions. And the coefficient of effective buckling length is calculated from the experiment.

• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.597-605
• /
• 2015

In this study, linear vibrations of an axially moving beam under non-ideal support conditions have been investigated. The main difference of this study from the other studies; the non-ideal clamped support allow minimal rotations and non-ideal simple support carry moment in minimal orders. Axially moving Euler-Bernoulli beam has simple and clamped support conditions that are discussed as combination of ideal and non-ideal boundary with weighting factor (k). Equations of the motion and boundary conditions have been obtained using Hamilton's Principle. Method of Multiple Scales, a perturbation technique, has been employed for solving the linear equations of motion. Linear equations of motion are solved and effects of different parameters on natural frequencies are investigated.

• 제어로봇시스템학회논문지
• /
• 제19권5호
• /
• pp.423-428
• /
• 2013

This paper investigates a boundary tracking problem using multiple quadrotor UAVs to detect and track the boundary of physical events. We set the boundary estimation problem as a classification problem of the region in which the physical events occur, and employ SVL (Support Vector Learning). We also demonstrate a velocity vector field which is globally attractive to a desired closed path with circulation at the desired speed and a virtual phase for stabilizing the collective configuration of the multiple quadrotors. Experimental results with multiple quadrotors show that this study provides good performance of the collective boundary tracking.

• Communications for Statistical Applications and Methods
• /
• 제20권3호
• /
• pp.225-233
• /
• 2013

The linear support vector machine(SVM) is motivated by the maximal margin separating hyperplane and is a popular tool for binary classification tasks. Many studies exist on the consistency properties of SVM; however, it is unknown whether the linear SVM is consistent for estimating the optimal classification boundary even in the simple case of two Gaussian classes with a common covariance, where the optimal classification boundary is linear. In this paper we show that the linear SVM can be inconsistent in the univariate Gaussian classification problem with a common variance, even when the best tuning parameter is used.

• Advances in nano research
• /
• 제14권3호
• /
• pp.285-294
• /
• 2023

The dynamic and sensing performances of nanomechanical resonators with their different boundary conditions are studied based on surface elasticity-based modeling and simulation. Specifically, the effect of surface stress is included in Euler-Bernoulli beam model for different boundary conditions. It is shown that the surface effect on the intrinsic elastic property of nanowire is independent of boundary conditions, while these boundary conditions affect the frequency behavior of nanowire resonator. The detection sensitivity of nanowire resonator is remarkably found to depend on the boundary conditions such that double-clamping boundary condition results in the higher mass sensitivity of the resonator in comparison with simple-support or cantilever boundary condition. Furthermore, we show that the frequency shift of nanowire resonator due to mass adsorption is determined by its length, whereas the frequency shift is almost independent of its thickness. This study enables a design principle providing an insight into how the dynamic and sensing performances of nanomechanical resonator is determined and tuned.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.965-970
• /
• 2002

The purpose of this paper is to investigate the free vibration characteristics of tapered beams with general boundary condition(translational and rotational elastic support) at one end and carrying a tip mass with translational elastic support at the other end. The beam model is based on the classical Bernoulli-Euler beam theory which neglects the effects of rotatory inertia and shear deformation. The governing differential equation for the free vibrations of linearly tapered beams is solved numerically using the corresponding boundary conditions. Numerical results are compared with existing solutions by other methods for cases in which they are available. The lowest four natural frequencies are calculated over a wide range of section ratio, dimensionless spring constant and mass ratio.