• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.310-312
• /
• 2000

This paper presents database for electricity demand-side management. Demand-Side Management(DSM) refers to programs that influence the usage of energy for improved economic efficiency and reduced environmental impact DSM can be looked upon as a tool for energy utilities to find resources on the demand side instead of on the supply side, or as a more general tool for society to better use and distribute scarce resources. In this paper, we construct the database for electricity demand-side management and apply it to residential and commercial sector.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.50-55
• /
• 2011

The fluid power products are widely used in current industrial area such as automation of products and equipment assembly, high-tech machine tool, aircraft, train, and etc. As the development of industry is in progress, the development of the fluid power products is demanding and it is required in every industrial area. This research proposed a pneumatic system to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the valve system. The pneumatic system consisted of a combination of pneumatic actuator, four two-port valves, two three-port valves, two pressure valve, a check valve, two proximity sensors, and a program logic controller (PLC). The position controller is based on the PLC connected with the proximity sensors. The maximum air pressure applied for tests was $49.05N/cm^2$ and the displacement accuracy of a stroke was measured using a dial gauge. The supply- and discharge-side of air pressure and the length of the stroke of the pneumatic cylinder were varied The test of the position control of the pneumatic cylinder was carried out 50 times at each supply- and discharge-side air pressure of 24.53/34.34, 29.43/39.24, 34.34/44.15, and $39.24/49.05N/cm^2$ and replicated three times. The accuracy of the displacement of the pneumatic cylinder stroke increased as the supply- and discharge-side of air pressure increased with the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with the fixed supply- and discharge-side of air pressure of the pneumatic cylinder as 34.34 and $44.15N/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder was obtained at the supplyand discharge-side of air pressure of 39.24 and $49.05N/cm^2$, respectively, and strokes of 170 and 190mm.

• The Korean Society of Law and Medicine
• /
• v.10 no.1
• /
• pp.213-260
• /
• 2009

While the medical supplies have positive functions such as extending lifespan, recovering health, and preventing diseases, they also cause unexpected tragic consequences due to their side effects, and the magnitude of such damage inevitably increases due to the mechanism of mass production, mass distribution, and mass consumption of those medical supplies. Therefore, needless to say, the optimal way to prevent or reduce such damage is rather through medical supply manufacturers' producing non-defective products, or through the government's controlling production and sales of medical supplies with more aggressive exercise of regulatory authority on medical supply manufacturers, than through a remedy by a legal relief after using medical supplies. In this case, although the victim died due to the defect of the cold medicine, 'CONTAC 600', the drug company's responsibility to cover damages was not recognized because a defect could not be found in the then-manufacturing process. Thus, while pharmaceutical companies are gaining economic profits by producing and selling a medical supplies, if they do not take any remedy measures for the victims of their products' side effects, the victims have to use medical supplies under their own responsibility of taking a risk, and they have to accept the full damage of the potential consequence. Therefore, to remove such absurdity and contradiction, and to practically remedy the victim of medical supplies' side effects, the pharmaceutical side effects remedy project pending in the the Drugs, Cosmetics and Medical Instruments Lawneeds to be actively implemented.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.188-192
• /
• 2006

This study is conducted to improve efficiency of thermal storage tank. The thermal storage tank was designed to store heat energy that obtained from solar or the others heat sources. However, it has difficulties in storing heat with uniform temperature through the entire tank with respect to vertical direction. This kind of maldistribution of the supplied heat to the storage tank effects on the system performance. In this study is focused on utilization of the thermal stratification to improve thermal comfort for people in the house. To enhance temperature stratification of the tank, a distributor was designed and Installed in the middle of the tank. The distributor is supplies hottest water to the top side of the tank which is very close to inlet of the supply line to the heating load. The hottest water that is accumulated on top side of the tank is firstly supplied to the load with higher temperature. Reminder water takes a little time to warming up until desired supply temperature reached. This kind alternating selection of the supply temperature is improve thermal comfort with moderated system performance.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.7-12
• /
• 2011

This paper described a metal mount RFID tag that works reliably on metallic surface. The proposed method is to use commercial RFID tags, Styrofoam103.7 material is attached on back side of RFID tag. Styrofoam103.7 material which has 2.5 mm thickness and 1.03 relative permittivity, was attached on back side of RFID tag. In order to verify the performance of proposed method, we evaluated the experiment on the supply chain system of electric transformers using RFID. The experimental results on supply chain of electric transformers show that the proposed tags can communicate with readers from a distance of 2 m. The results of recognition rates are comparable to commercial metallic mountable tags.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.593-598
• /
• 2017

Induction generator is always required reactive power in order to generate a rotating magnetic field as an inductive load. The reactive power must be continuously supplied to the induction generator as well as load of distribution system from the power supply side. So the power factor of the power supply side during the induction generation operation is low. Condenser is installed in order to raise the low power factor of the induction generator. Switching transients occurs when the power supply of the capacitor is turned on in order to ensure the low power factor. When using the reactor in series with the capacitor in order to reduce the influence of switching transient, it can affect the reactive power by the condenser voltage rises. In this study, we analyzed the operating characteristics for power and power factor of induction generator in accordance with the presence or absence of the application of the serial reactors for switching transients reduction of the condenser and the condenser for power factor correction.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.214-220
• /
• 2005

In order to improve energy efficiency and solve power disturbances, power components measurement for both the supply and demand side of a power system must be implemented before appropriate action on the power problems can be taken. This paper presents a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power measurement system that can simultaneously measure and analyze power components for both supply and demand. Voltage 8-channel and current 10-channel measurement is made through voltage and current sensors connected to the developed system, and power components such as reactive power, power factor and harmonics are calculated and measured by the DSP. The measured data are stored in a personal computer (PC) and a commercial program is then used for measurement data analysis and display. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested using a programmable ac power source. The test results showed the accuracy of the developed system to be about 0.3 percent. Also, a simultaneous measurement field test of the developed system was implemented by application to the supply and demand side of the three-phase power system.

• Management Science and Financial Engineering
• /
• v.14 no.2
• /
• pp.105-118
• /
• 2008

There are many debates on the topic of the relationship between oil prices and economic growth. Through the repeated processes of conformations and contractions on the subject, two main issues are developed; one is how to define and drive oil shocks from oil prices, and the other is how to specify an econometric model to reflect the asymmetric relations between oil prices and output growth. The study, thus, introduces the unobserved component model to pick up the oil shocks and a first-order Markov switching model to reflect the asymmetric features. We finally employ unique oil shock variables from the stochastic trend components of oil prices and adapt four lags of the mean growth Markov Switching model. The results indicate that oil shocks exert more impact to recessionary state than expansionary state and the supply-side oil shocks are more persistent and significant than the demand-side shocks.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.233-238
• /
• 2006

In order to solve power disturbances, power components measurement for both supply and demand side of power system must be implemented. This paper proposed a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power components measurement system that simultaneously can measure and analyze power components for both supply md demand side. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested in the field.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1088_1089
• /
• 2009

The photovoltaic(PV) industry has been growing worldwide. Recently, the PV industries not also in the traditional PV advanced countries but also in other countries are rapidly growing. Especially, China has become the largest supplier in the world PV supply side since 2007. Both the world PV supply and demand rose steadily in 2008 like recent bumper years. In 2008, the world solar cell production reached 6.85GW~7.91GW presenting growth of 85% over the previous year. On the demand side, 81 countries contributed to the 5.95GW presenting growth of 110% over the previous year.