• Journal of Animal Environmental Science
• /
• v.7 no.1
• /
• pp.13-20
• /
• 2001

This study was conducted to investigate the actual conditions on housing and facilities for goat. This investigation of the actual conditions was investigated by the style of farm which was divided into sideline scale and speciality scale included 47 farms. The results are summarized as follows: Rearing scale was 48.9% for 50-100 heads per farm. Rearing type was 46.8% for grazing type and 53.2% for barn type. Housing type was 27.7% for simple frame housing and 72.3% for permanent housing. Pipe was used 80.8% with Pillar and Girder as the housing frame at farm. For the pipe used in farm, 27.7% of them was used for simple frame housing. Side wall was composed of cement and winch curtain to be 29.8%, slate roof to be 40.4%, pipe partition to be 38.3%, and cement floor to be 51.1%. Materials of feeding trough were wood and Zinc grater to be 41.5%, respectively. Type of feeding trough was square to be 70.2%. The feeding trough was located in barn to be 48.9%. Material of water supply facilities was plastic to be 87.2%. Type of water supply facilities was mostly square to be 76.6%. Water-trough was located in playground to be 48.9%. Parturition facilities were consisted of partition structure by group to be 42.5% and were mainly composed of pipe and wood. 46.8% of the barn did not have delivery room in the farm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.372-375
• /
• 2021

A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.

• Asian Journal of Innovation and Policy
• /
• v.10 no.1
• /
• pp.68-89
• /
• 2021

The expansion of irrigated agricultural production can be appropriate for the southeast region in the U.S. as a climate change adaptation strategy. This study investigated the effect of supplemental development of irrigated agriculture on the regional economy by applying the supply side Georgia multiregional input-output (MRIO) model. For the analysis, 100% conversion of non-irrigated cultivable acreage into irrigated acreage for cotton, peanuts, corn, and soybeans in 42 counties of southwest Georgia is assumed. With this assumption, the difference in total net returns of production between the non-irrigation and irrigation method is calculated as input data of the Georgia MRIO model. Based on the information of a 95% confidence interval for each crop's average price, the lower and upper bounds of estimated results are also presented. The total impact of cotton production was $60 million with the range of $35 million to $85 million: The total impact of peanuts, soybeans, corn was $10.2 million (the range of $3.28 million to $23.7 million), $6.6 million (the range of $3.1 million to $10.2 million), $1.2 million (the range of -$6 million to $8.5 million), respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.206-206
• /
• 2021

The necessity for appropriate management of water resources infrastructures such as reservoirs, levees, and dikes is increasing due to unexpected hydro-climate irregularities and rising water demands. To meet this need, past studies have focused on advancing theoretical optimization algorithms such as nonlinear programming, dynamic programming (DP), and genetic programming. Yet, the optimally derived theoretical solutions are limited to be directly implemented in making release decisions in the real-world systems for a variety of reasons. This study first aims to comparatively analyze the two prominent optimization methods, DP and evolutionary multi-objective direct policy search (EMODPS), under historical inflow series using K-fold cross validation. A total of six optimization models are formed each with a specific formulation. Then, one of the optimization models was coupled with the actual zone-based hedging rule that has been adopted in practice. The proposed methodology was applied to Boryeong Dam located in South Korea with conflicting objectives between supply and demand. As a result, the EMODPS models demonstrated a better performance than the DP models in terms of proximity to the ideal. Moreover, the incorporation of the real-world policy with the optimal solutions improved in all indices in terms of the supply side, while widening the range of the trade-off between frequency and magnitude measured in the sides of demand. The results from this study once again highlight the necessity of closing the gap between the theoretical solutions with the real-world implementable policies.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.23-31
• /
• 2009

Since 9.11 terrorist attacks against the USA, the new paradigm for "supply chain security" has been established. And at the same time a lot of researches are being made on supply chain security by many foreign companies or research institutes. However, domestically the terms "supply chain security" themselves are not yet familiar, and the paradigm of security are not being used in the logistics, while little researches are being made on them But recently along with development of "ConTracer," a supply chain security technology, which is to be used as the equipment for container cargo transportation safety based on RF1D technology, related researches have begun to be activated. The key issues for the development of equipment for container transportation safety are to obtain both a high recognition rate and enough recognition distance. To this end, this study has tested the ConTracer (433 MHz type and 2.4 GHz type) by using Taguchi Method. According to our test results, in the case of 433 MHz type, it is a little more effective that the reader faces to the front-right side, and in the case of 2.4 GHz, reader direction does not make difference in the view of sensitivity. The test also has proved that it is better that antenna location, as expected, is to be installed on the outside for both types alike.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.577-582
• /
• 2016

This Study focused on the development of SMPS (Switching Mode Power Supply) to supply the constant votage and current nevertheless LED fluorescent Light generated the electric noise (with Harmonics) and Inrush current at instant time of turn-on and off. Recently, according to the Green policy in government, the LED fluorescent Lighter showed the rapidly increasing tend as indoor and outdoor Lighter. But, because of costs, LED fluorescent Light not considered and neglected the following items; power factor, efficiency, Harmonics and Inrush current. So, we are developed the SMPS about 3 key issues as follows: 1st, power factor and efficiency is 85%. 2nd, the switching noisy by harmonic is minimized. 3rd, the Inrush current at turn on and off time is reduced the minimum 0.3 A after $100{\mu}sec$ on turnon time. The proposed SMPS adjusted by LNK 409 driver (included the high frequency modulation function). Although, the developed SMPS maintained the about 85% of power factor and efficiency. but, the SMPS must be generated low heat by the variation of minute load current at switching timing. To improve the above weak point, the developed SMPS have the feedback monitoring circuit between input side and output side to maintain the power factor and efficiency. Also, we are studied the time-constant of control circuit to output the constant voltage and current nevertheless the load disturbance of LED lighting. The LED fluorescent Light of 46W is checked the above items.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.67-75
• /
• 2005

A high efficiency ZVS PWM asymmetrical half bridge converter for a plasma display panel (PDP) sustaining power modules is proposed in this paper. To achieve the ZVS of power switches for the wide load range, a small additional inductor L/sub 1kg/, which also acts as an output filter inductor, is serially inserted into the transformer's primary side. At that point, to solve the problem of ringing in the secondary rectifier caused by L/sub 1kg/, the proposed circuit employs a structure without the output filter inductor, which helps the voltages across rectifier diodes to be clamped at the output voltage. Therefore, no dissipative RC (resistor capacitor) snubber for rectifier diodes is needed and a high efficiency as well as low noise output voltage can be realized. In addition, since it has no large output inductor filter, the asymmetrical half bridge converter features a simpler structure, lower cost, less mass, and lighter weight. In addition, since all energy stored in L/sub 1kg/ is transferred to the output side, the circulating energy problem can be effectively solved. The operational principle, theoretical analysis, and design considerations are presented. To confirm the operation, validity, and features of the proposed circuit, experimental results from a 425W, 385Vdc/170Vdc prototype are presented.

• Journal of Agricultural Extension & Community Development
• /
• v.12 no.2
• /
• pp.163-172
• /
• 2005

Since the financial turmoil in 1997, both the national and local governments have initiated a variety of policy measures to support small and medium-size firms to strengthen the national and regional economies. It is no doubt that such policies contributed to establish better business environment for them. However, many analytical reports and academic studies in recent years diagnose that the economy conditions for the small and medium-size firms are in crisis because many policy measures are made based on the supply-side approach rather than demand-side consideration. In order for the governments' efforts to be more realistic and effective, it is necessary to see what the policy target groups(that is. the small and medium-size entrepreneurs) want. This study surveyed entrepreneurs in Hwaseung city, Kyonggi-do, which has more than three-thousands of small and medium-size firms. It finds that in spite of locational advantages and a variety of policy supports from the provincial and local governments, they need more financial supports, more effective mass transportation system for commuting workers. less bureaucratic barriers, and so on.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.190-194
• /
• 2006

This research investigates vehicle structure acceleration and vehicle deformation with RCAR crash test. To investigate vehicle damage characteristics in an individual case, it is possible to RCAR low speed crash test. In this study, two tests were conducted to evaluate difference between RCAR new condition and RCAR old condition. A two large vehicles were subjected to a frontal crash test at a speed of 15km/h with an offset of 40% $10^{\circ}$ angle barrier and flat barrier. The results of the 15km/h with an offset of 40% $10^{\circ}$ angle barrier revealed high acceleration value on the vehicle structure and high repair cost compared to the RCAR 15km/h with an offset of 40% flat barrier. So in order to improve damage characteristics in low speed crash of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.213-217
• /
• 1990

This study suggests a new type flow control logic valve which have grooves on the main poppet valve. The grooves connect oil supply port to pilot chamber and the oil passages made by the grooves are designed to vary in proportion to the displacement of the main poppet valve. From analytical formulations on the hydraulic circuit including the flow control valve, equations on the characteristics of the valve were obtained. In the experiment, the relationships between valve displacement and flow rate to the load side, and the variations of flow rate to the load side according to the variation of load pressure were investigated. From the experimental and numerical results, it was ascertained that the flow control valve designed in this study had excellent characteristics on proportional control and remote control.