• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.164-173
• /
• 2001

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1933-1947
• /
• 1991

The synthesis of supplementary features of injection molded parts has been done empirically, since it requires profound knowledge about the features' moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. RIBBER is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate acceptable supplementary features of injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, RIBBER, for mold feature synthesis and appropriate CAE programs for mold design analysis to an existing geometric modeler in order to provide designers, at the initial design stage, with comprehensive process knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.606-611
• /
• 2009

This paper describes a method for achieving a novel design within a class of 3D objects that would create a preferred impression on users. Physical parameters of the 3D objects that might strongly contribute to their visual impressions are sought through computational investigation of the impression ratings obtained for learning samples. "Car body" was selected as the class of 3D objects to be investigated. A morphable 3D model of car bodies that describes the variations in appearance using a smaller number of parameters was obtained. Based on each car body's rating for the impression of speediness obtained by paired comparison, the visual impression was transformed by manipulating the parameters defined in the morphable 3D model. The validity of the proposed method was confirmed by psychological experiments. A new scheme is also proposed to properly re-sample a novel object of a peculiar shape so that such an object could also be represented by the morphable 3D model.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.32-39
• /
• 1995

The design of injection molded polymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. An interactive computer-based design system is developed in order to realize the concept of rational design for the productivity and quality of mold making. The knowledge-based CAD system is constructed by adding the knowledge -base module for mold feature synthesis and appropriate CAE programs for mold design analysis in order to provide designers, at the initial design stage, with comprehensive process knowledge for feature synthesis, performance analysis and feature-based geometric modeling. A knowledge-based CAD system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.206-206
• /
• 2004

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.7-11
• /
• 2007

The design and manufacture of injection-molded parts with desired properties is a costly process dominated by empiricism, Including the repeated modification of actual tooling. The objective of this study is to obtain the good design of injection-molded polymeric parts using axiomatic design approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.175-183
• /
• 1999

This paper describes the network configuration, No. 7 signaling IS-41.A protocol and basic operations for the RFC(Remote Feature Control) service which is one of the supplementary services provided in the mobile telephone network. In order to solve the protocol error occurred while providing the RFC service for analog system, this paper suggests three schemes and analyse detail signal algorithm for the proposed schemes. Through the simulations, it is verified the best choice of the proposed schemes without the signaling procedure error.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.877-885
• /
• 2004

In this paper, we propose an enhancement shot change detection method using the neural net and the robust feature selection out of multiple features. The previous shot change detection methods usually used single feature and fixed threshold between consecutive frames. However, contents such as color, shape, background, and texture change simultaneously at shot change points in a video sequence. Therefore, in this paper, we detect the shot changes effectively using robust features, which are supplementary each other, rather than using single feature. In this paper, we use the typical CART (classification and regression tree) of data mining method to select the robust features, and the backpropagation neural net to determine the threshold of the each selected features. And to evaluation the performance of the robust feature selection, we compare the proposed method to the PCA(principal component analysis) method of the typical feature selection. According to the experimental result. it was revealed that the performance of our method had better that than the PCA method.

• Child Health Nursing Research
• /
• v.5 no.1
• /
• pp.18-26
• /
• 1999

The purpose of this study was to explore the late schooler's health concept and health behavior. The research was a descriptive method using a self-report questionaire which include semi open-ended questions. the subjects were 458 late schooler's from 4 to 6 grade. The results were as follows : 1. Perceived health concepts were ‘having no illness’ ‘having normal physical feature and strength’ ‘eating food well’ ‘take exercise’ ‘having a bright mind’ ‘having good interpersonal relationships’‘having strong will’ ‘recovering well’. 2. Perceived health behaviors to maintain health were ‘taking proper exercise’ ‘eating proper food’ ‘maintaining cleanliness’ ‘taking sufficient rest and sleep’ ‘having a vigor life and positive thought’ ‘having good interterpersonal relationships’ ‘receiving health check and immunization’. 3. Health behaviors carried out at present were ‘taking proper exercise’ ‘eating proper food’ ‘having a vigor life and positive thought’ ‘receiving health check an immunization’ ‘taking supplementary drugs’ ‘having a regular life’ ‘maintaining cleanliness’ ‘maintaining warmth’. 4. Perceived causes of illness were ‘taking inproper food’ ‘uncleanliness’ ‘insufficient warmth or environment’ ‘lack of exercise or overexertion’ ‘irregular life habits’ ‘contact with germs’ ‘mental stress’. 5. Perceived treatments of illness were ‘having sufficient rest and sleep’ ‘mental relaxation’ ‘eating food’ ‘ maintinging cleanliness’ ‘ maintaining warmth’ ‘taking supplementary drug’ ‘receiving medical treatment’.

• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.37-43
• /
• 2008

Supplementary features in injection molded products, which are boss, rib and snap fit, are mainly located in the products. These features might make molding flow improper in injection processing and consequently give rise to some of molding troubles such as short shot and hesitation. The sink mark on boss parts is generated by the volumetric shrinkage that is caused by both the molding thickness and the closed boss height. The volumetric shrinkage is affected by packing pressure and its amount tends to decrease by increasing the packing pressure. The packing pressure can therefore increase flow rate to a boss part and causes the sink mark depth to increase. As the molding thickness and the closed boss height in the boss part can increase the part volume, these may yield bad solidifying and also extend the molding cycle. In this paper, both the injection molding test and the flow analysis were carried out to investigate the effect of sink marks generated in the boss part of injection molded products.