• Journal of Korea Port Economic Association
• /
• v.32 no.3
• /
• pp.1-20
• /
• 2016

The objective of this study was to select world top 20 major container terminals that belong to Korea and China as comparison units to analyze their efficiency and productivity trend. Super Efficiency Data Envelopment Analysis(SE-DEA) and Malmquist Productivity Index(MPI) models were applied to this study. Compared with previous studies, we narrowed down the scope of the comparison units to terminals and conducted more detailed analysis to present more meaningful implications to the actual operation. The different result from existing studies, SE-DEA analysis implied that the major terminals of Busan New Port showed similar efficiency and productivity with China's terminals. In MPI analysis, the average index of Korean and China's terminals is 1.051 and 1.049. The analysis indicates that the productivity was improved 5.1% and 4.9% annually. From 2012 to 2015, the average terminal TCI index of South Korea and China were 1.032 and 1.0318-the main factor which influences MPI. This means improving productivity mainly rely on investment in new equipment and technology upgrades rather than improve operational efficiency over the past few years. Future management decisions should consider more aggressive marketing to increase the volume and improve operational efficiency to enhance productivity. Further research should apply the overall efficiency of the methodology considering the financial diversification, terminal capacity, service levels, and other factors.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.121-130
• /
• 1993

A study off riction welding of high speed steel(SKH 51) bar for blade side to carbon steel(STC 3)bar for shank side was carried out experimentally through tensile test, hardness test, microstructure, and acoustic emission (AE) test. So, this paper deals with optimizing the welding conditions and the real-time quality (strength) evaluation of friction weleded joints by acoustic emission technique. The results obtained are summarized as follows: (1) For friction welded joints of SKH 51to STC 3 steel bars, the total upset (U) increases linearly with an increase of heating time (t sub(1)). (2) The determined optimum welding conditions are heating time (t sub(1)) 7-9 sec, upsetting time (t sub(2)) 5 sec, heating pressure(P sub(1)) 12 kg sub(f)mm supper(2), upsetting pressure (P sub(2)) 15 kg sub(f) mm supper(2) and rotating speed (n) 2, 000 rpm, resulting in a computed relationship between the tensile strength of the joint .sigma. (kg sub(f) mm supper(2)) and the heating time t sub(1) (sec) as the following. sigma.=2.39t sub(1)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.225-227
• /
• 2018

항만 배후단지는 항만과의 연계된 네트워크로 점점 중요해지는 가운데 다국적으로 앞 다투어 고부가 가치 창출을 위한 다양한 법과 제도를 마련하고 있다. 유럽, 아시아, 북미 등 여러 국가에서 배후단지 활성화를 위한 투자와 발전을 위해 노력하고 있으며 이에 한국도 제3차 항만배후단지개발 종합계획을 통해 단계적 변화의 움직임을 보여주고 있다. 따라서 본 논문에서는 DEA(Data envelopment analysis)와 Malmquist 분석을 통해 한국의 주요 항만배후단지의 생산성과 효율성을 파악하였다. 분석결과 부산 신항 북컨, 광양항 서측배후단지는 효율성이 높고 부산 신항 운동, 광양 동측 배후단지 및 아암 1단지는 효율성이 낮게 나타났다. 연구 분석을 통해 향후 항만 배후단지의 경영 환경 및 수익성이 개선되어야한다는 점을 시사한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.2
• /
• pp.117-123
• /
• 2001

Anchovy scoop nets, a kind of lift net have been used in the coastal area of Cheju and South sea of Korea. An incandescent lamp(AC 100V, 1kW) is being used as a fishing lamp for gathering anchovy. Fishing lamp was installed at 1m ahead of the prow and 1.5m higher than the water surface. The fishing lamp let fish school rise to the water surface and attract to bag net. Accordingly, a successful anchovy catching depends on controling of fishing lamp. On the study, the distribution of spectral irradiance illumination of incandescent lamp(1kw) and the irradiance efficiency of reflection plate were analyzed and discussed to investigate the ability of fishing lamp which can attract anchovy school effectively. The results obtained are summarized as follows : 1. Around 180% of irradiance efficiency of incandescent lamp was increased by using the reflection plate. The light of lamp was radiated into water with circular shape. 2. The irradiance illumination of incandescent lamp in air was a maximum in wave length of 994nm but it was 690nm at 0.5m and 1.0m of water depth. 3. The relationship between water depth(x) and water illumination(y) of vertical light is represented as follows : y=146.03e supper(-0.37x) 4. The light of incandescent lamp(1kW) pass through much better into vertical direction than horizontal but it was estimated that the light was not able to reach depth of 20m.