• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.287-292
• /
• 2005

The flowfields generated by gaseous slot injection into a supersonic flow at a Mach number of 3.75 and a Reynolds number of $2.07{\times}10^7$ are simulated numerically. Fine-scale turbulence effects are represented by a two-equation(k-w SST model) closure model which includes $y^+$ effects on the turbulence model. Grid convergence index(GCI) is also considered to provide a measure of uncertainty of the grid convergence. Comparison is made with experimental data and other turbulence model in term of surface static pressure distributions, the length of the upstream separation region, and the penetration height. Results indicate that the k-w SST model correctly predicts mean surface pressure distribution and upstream separation length. However, it is also observed that the numerical simulation over predicts the pressure spike and penetration height compared with experimental data. All these results are taken within $1\%$ error band of grid convergence.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.601-613
• /
• 2017

An adjoint-based error estimation and mesh adaptation study is conducted for two-dimensional viscous flows on unstructured hybrid meshes. The error in an integral output functional of interest is estimated by a dot product of the residual vector and adjoint variable vector. Regions for the mesh to be adapted are selected based on the amount of local error at each nodal point. Triangular cells in the adaptive regions are refined by regular refinement, and quadrangular cells near viscous walls are bisected accordingly. The present procedure is applied to single-element airfoils such as the RAE2822 at a transonic regime and a diamond-shaped airfoil at a supersonic regime. Then the 30P30N multi-element airfoil at a low subsonic regime with a high incidence angle (${\alpha}=21deg.$) is analyzed. The same level of prediction accuracy for lift and drag is achieved with much less mesh points than the uniform mesh refinement approach. The detailed procedure of the adjoint-based mesh refinement for the multi-element airfoil case show that the basic flow features around the airfoil should be resolved so that the adjoint method can accurately estimate an output error.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.49-53
• /
• 2015

Thrust vector control is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. TVC of the tapered ramp tabs has the potential to produce both large axial thrust and high lateral force. We have conducted the experimental research and flow analysis of ramp tabs to show the performance and the structural integrity of the TVC. The experiments are carried out with the supersonic cold flow system and the schlieren graph. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2066-2077
• /
• 2003

The time-dependent behavior of unsteady condensation of moist air through the Ludwieg tube is investigated by using a computational fluid dynamics (CFD) work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme, with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The predicted results are compared with the previous experiments using the Ludwieg tube with a diaphragm downstream. The present computations represent the experimental flows well. The time-dependent unsteady condensation characteristics are discussed based upon the present predicted results. The results obtained clearly show that for an initial relative humidity below 30% there is no periodic oscillation of the condensation shock wave, but for an initial relative humidity over 40% the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to unsteady condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity and it results from the periodic excursions of the condensation shock wave.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.168-173
• /
• 1998

A numerical analysis of axisymetric backward facing step main nozzle flow in air jet loom has been accomplished. To obtain basic design data for an optimum main nozzle for an air-jet loom and to predict the transonic/supersonic flow, a characteristic based upwind flux difference splitting compressible Navier-Stokes method has been used. The wall static pressure of the main nozzle and the flow velocity changes in the nozzle tube were analyzed by changing air tank pressures and acceleration tube lengths. The flow inside the nozzle experiences double choking one at the needle tip and the other at the acceleration tube exit at tank pressures over $4kg_f/cm^2$. The tank pressure $P_t$ leading to the critical condition depends on the acceleration tube length; i.e, $P_t$ is higher for longer acceleration tubes. The $P_t$ value required to bring the acceleration tube exit to the critical condition is nearly constant regardless of acceleration tube length. The round needle tip shape might lead to less total pressure loss when compared with step shape.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.9-19
• /
• 2002

AUSMPW+의 해의 정확성은 음속의 정의와 밀접한 관계가 있다. 아음속, 천음속 그리고 초음속 유동 영역에서 제어면의 음속의 해의 정확성에 어떠한 영향을 미치는지 살펴보았다. AUSMPW+에서 정의된 음속의 특징은 충격파 포착시 정확성 향상과 엔트로피 조건을 만족시키기 위한 팽창충격과 현상을 제거로 요약될 수 있다. 수학적 증명과 수치실험을 통해 이를 확인할 수 있었다. 그리고 반응 기체로 확장하여 평형, 비평형 기체에 대해서도 충격파를 정확하게 포착할 수 있는 음속을 제시하였고 이를 여러 가지 수치 실험을 통해 확인하였다.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.67-72
• /
• 2015

The main concern of this study is to integrate the EARSM into an industrial RANS solver in conjunction with the $k-{\omega}$ model, as proposed by Hellsten (EARSMKO2005). In order to improve the robustness, particular limiters are introduced to turbulent conservative variables, and a suitable full-approximation storage (FAS) multi-grid (MG) strategy is designed to incorporate turbulence model equations. The present limiters and MG strategy improve both robustness and efficiency significantly but without degenerating accuracy. Two discretization approachs for velocity gradient on cell interfaces are implemented and compared with each other. Numerical results of a three-dimensional supersonic square duct flow show that the proper discretization of velocity gradient improves the accuracy essentially. To assess the capability of the resulting EARSM $k-{\omega}$ model to predict complex engineering flow, the case of Common Research Model (CRM, Wing-Body) is performed. All the numerical results demonstrate that the resulting model performs well and is comparable to the standard two-equation models such as SST $k-{\omega}$ model in terms of computational effort, thus it is suitable for industrial applications.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.788-793
• /
• 2017

This military aircraft requires the compatibility evaluation of armed installations in accordance with guidelines and standards. In order to ensure the influence of gas-air mixtures caused by gunfire of the supersonic aircraft, CFD analysis of internal and external flows was performed and the results carried out and discussed. The low velocity vortex was formed due to the shape of the Gun Port, after firing the gas-air mixture was evacuated to the outside flow, where it moved to the front of the aircraft and soon merged with the aircraft flow field.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.1-11
• /
• 2002

본 연구에서는 특별히 PC cluster와 같은 병렬 환경에서 효율적인 계산을 수행할 수 있는 격자중심에 기초한 직접모사 기법을 개발하였다. 병렬환경 하에서의 효과적인 계산 수행을 위해서는 전체 계산 영역을 격자수와 각 격자에 할당되는 모사 입자 수를 고려한 부 영역들로 나누어주었다. 또한, 격자 사용의 효율성 증대를 위해서는 매우 성긴 격자에서부터 출발하여 점차적인 격자 적응을 수행하였다. 본 방법은 2차원의 초음속 평판 문제와 축대칭의 Rothe, 노즐 문제에 적용하였다. 그 결과로부터 본 방법을 사용하면 기존의 입자 중심 기법에 비해 매우 효율적으로 희박기체 유동을 해석할 수 있음을 알 수 있었다.

• 한국추진공학회지
• /
• 제12권2호
• /
• pp.24-32
• /
• 2008

마하 1.92 초음속 유동 내에서 평판, 작은 공동, 큰 공동을 사용하여 운동량비(J)에 따른 연료 혼합 실험을 수행하였다. 공동 후면 경사부는 연료의 침투거리를 급격히 증가시키며, 경사부에서 형성되는 이차원 충격파는 후류부의 충격파 구조와 혼합층에 주요한 영향을 미친다. 운동량비가 증가함에 따라(J = 0.9, 1.7, 3.4) 연료의 침투거리가 증가하지만, 후류부에서는 운동량비가 증가하더라도 연료 침투거리는 특정 지점 이상 증가하지 않았다. 큰 공동의 경우 다른 모델에 비해 좋은 혼합 효율을 보이지만 압력 손실 또한 증가하는 경향을 보인다.