• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.42-49
• /
• 2008

GDD models of corn were developed in bare soil, while sweet and super sweet corns are grown under black polyethylene (P. E.) film mulch in Korea. To develop a suitable GDD model under black P. E. film mulch, a super sweet com hybrid "Cambella-90" was planted from 1 April to 30 June in 2003 at the 10-day intervals under black P. E. film mulch and in bare soil. In bare soil the best GDD model was $GDD\;=\;{\sum}[H"+L')/2\;-\;10^{\circ}C]$, where H" was daily maximum temperature but is was substituted for $30^{\circ}C$ - (daily maximum temperature - $30^{\circ}C$) when higher than $30^{\circ}C$ and L' was daily minimum temperature, but it was substituted for $10^{\circ}C$ when lower than $10^{\circ}C$. The same GDD model could be adapted for com grown under black P. E. film mulch, but base temperature was substituted for $9^{\circ}C$. To determine planting date for the scheduled harvests, accumulated GDDs were calculated using 30-year average temperature data during the growing season. Under black P. E. film mulch planting dates were determined by subtracting GDD of the hybrid, $970^{\circ}C$, from accumulated GDD of scheduled harvest dates.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.639-643
• /
• 2011

Zinc oxide as an optoelectronic device material was studied to utilize its wide band gap of 3.37 eV and high exciton biding energy of 60 meV. Using anti-site nitrogen to generate p-type zinc oxide has shown a deep acceptor level and low solubility. To increase the nitrogen solubility in zinc oxide, group 13 elements (aluminum, gallium, and indium) was co-added to nitrogen. The effect of aluminum on nitrogen solubility in a $3{\times}3{\times}2$ zinc oxide super cell containing 72 atoms was investigated using density functional theory with hybrid functionals of Heyd, Scuseria, and Ernzerhof (HSE). Aluminum and nitrogen were substituted for zinc and oxygen sites in the super cell, respectively. The band gap of the undoped super cell was calculated to be 3.36 eV from the density of states, and was in good agreement with the experimentally obtained value. Formation energies of a nitrogen molecule and nitric oxide in the zinc oxide super cell in zinc-rich conditions were lower than those in oxygen-rich conditions. When the number of nitrogen molecules near the aluminum increased from one to four in the super cell, their formation energies decreased to approach the valence band maximum to some degree. However, the acceptor level of nitrogen in zinc oxide with the co-incorporation of aluminum was still deep.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.325-333
• /
• 2007

To find out the planting times for the economic yield of a super sweet corn hybrid, "Cambella 90" was planted from 1 April of 2003 and 2004 at the 10 days intervals under black polyethylene (P. E.) film mulch and in bare soil in Gyeongsan. Daily maximum soil temperature under black P. E. film mulch was lower, while daily minimum soil temperature was higher compared to bare soil. Soil moisture content under black P. E. film mulch maintained optimum level longer than in bare soil. Emergence rate, percent stand, culm length, and the number of marketable ears were higher under black P E. film mulch compared to bare soil. Silking date under black P. E. film mulch was earlier compared to bare soil by $4{\sim}6$ days at April plantings, while only 1 day earlier at June plantings. Silking date of individual plants in a plot ranged $3{\sim}5$ days depending on planting dates and soil mulch in the same plot. The number of large ears decreased as planting dates delayed. Considering emergence rate and the number of marketable ears, the planting time for the economic yield of a super sweet com hybrid, "Cambella 90" ranged 1 April to 20 June in the southern part of Korea.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.121-127
• /
• 2011

Many peer-to-peer (p2p) systems have been studied in distributed, ubiquitous computing environments. Distributed hash table (DHT)-based p2p systems can improve load-balancing even though locality utilization and user mobility are not guaranteed. We propose a mobile locality-based hierarchical p2p overlay network (MLH-Net) to address locality problems without any other services. MLH-Net utilizes mobility features in a mobile environment. MLH-Net is constructed as two layers, an upper layer formed with super-nodes and a lower layer formed with normal-nodes. Because super-nodes can share advertisements, we can guarantee physical locality utilization between a requestor and a target during any discovery process. To overcome a node failure, we propose a simple recovery mechanism. The simulation results demonstrate that MLH-Net can decrease discovery routing hops by 15% compared with JXTA and 66% compared with Chord.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2013

This experiment was carried out to select white asparagus varieties suitable for shading culture in greenhouse. Eight white and one green varieties were tested. Seeds were sown in 72-cell trays in a glasshouse on 24 Dec. 2008 and the seedlings were transplanted in a P.E house on 22 May 2009. Planting distances were 30 cm apart in a raw and 125 cm between the raws. For white asparagus production, small tunnel ($210cm{\times}160cm$) was established inside the P.E house, and covered with black and white P.E film (0.1 mm) on 5 March 2010. Days to sprouting took 5 days in 'Ravel' variety and took 16 to 18 days in 'Backlim', 'Horlim', 'Herkolim' varieties. The number of spear was highest in 'Ravel' with 6 and lowest in 'Backlim' with 3.7. The spear weight was heaviest in 'Herkolim' with 25.6 g and lightest in 'Ravel' with 15.6 g. The highest total yield was in 'Herkolim' with 296 kg/10a, followed by 'Super welcome' with 275 kg/10a and lowest in 'Rapsody' with 176 kg/10a. Marketable yields in 'Super welcome' and 'Herkolim' were 241 kg/10a and 239 kg/10a, respectively, and the yield was lowest in 'Rapsody' with 139 kg/10a. The L grade (over 20 g of spear weight) was highest in 'Herkolim'. Accordingly, 'Herkolim' was the most suitable white asparagus variety among the tested varieties for shading cultivation in greenhouse.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2023

Super absorbent polymers (SAPs) are hydrophilic molecules that can absorb large amounts of water. This study was conducted to investigate the enhancement of the physicochemical properties of sand soil blended with three SAPs imbibed with 100, 150, and 200-fold water. Three treatments were applied, namely, 100SAP, 150SAP, and 200SAP. The three SAPs were blended at concentrations of 0% (control), 3%, 5%, 7%, and 10% with sand. The pH, electrical conductivity, and cation exchangeable capacity (CEC) of soil blended with the three SAPs were pH 6.35-6.46, 0.09-0.65 dS/m, and 1.42-1.92 cmol_c/kg, respectively, and their capillary porosity, total porosity, and saturated hydraulic conductivity were 21.0-29.3%, 39.2-48.7%, and 272-470 mm/hr. CEC, capillary porosity, total porosity, and saturated hydraulic conductivity of soil were positively correlated with the ratio of the SAPs (p<0.01). These results indicate that blending sand soil with SAPs increased CEC, capillary porosity, and saturated hydraulic conductivity, thus improving the nutrient-retention capacity, water-retention capacity, and permeability of the soil.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.3
• /
• pp.350-355
• /
• 2009

This study was performed to evaluate the sodium and potassium content of the 19 kinds of side dish purchased from traditional market and super market in Daejeon area. The results are summarized as follows. Sodium content(mg/100 g) among samples was the highest in the Jangachies. The sodium contents of Yeongeun jorim, Bellflower saengchae, Kkaetip jangachies, Chonggak kimchi, Changranjut in super market were significantly higher than those of the traditional market (p<0.05). On the other hand, the sodium contents of the other side dishes in traditional market were significantly higher those in super market. These results suggested that the sodium content of side dishes in the traditional market were higher than those in the super market. Sodium intake from Kimchi and Jangachies per one serving size is estimated significantly highest among samples. Also, potassium content of side dishes were low detected compare to sodium content and potassium content of side dishes in the traditional market were higher than those in the super market. From these results, it was suggested that food labeling (Na content) on the package of side dishes is to be required for lowering Na intake, and standard cooking methods is to be established.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.425-431
• /
• 2005

New type of supercapacitor using high surface area activated carbons mixed with high conductivity polypyrrole (Ppy) has been prepared in order to achieve low impedance and high energy density. Mixed carbons of BP-20 and MSP-20 were used as the active electrode material, and polypyrrole doped with 2-naphthalenesulfonic acid (2-NSA) and carbon black (Super P) as conducting agents were added to activated carbons in order to enhance good electric conductivity. Electrodes prepared with the activated electrode materials and the conducting agents were added to a solution of organic binder [P(VdF-co-HFP) / NMP]. The ratio of optimum electrode composition was 78 : 17 : 5 wt.％ of (MSP20 : BP-20=1 : 1), (Super P : Ppy=10 : 7) and P(VdF-co-HFP) respectively. The performance of unit cell with addition of 7 wt％ Ppy have shown specific capacitance of 28.02 F/g, DC-ESR of $1.34{\Omega}$, AC-ESR of $0.36{\Omega}$, specific energy of 19.87 Wh/kg and specific power of 9.77 kW/kg. With addition of Ppy, quick charge-discharge of unit cell was possible because of low ESR, low charge transfer resistance and quick reaction rate. And good stability up to 500 chargedischarge cycles were retained about 80％ of their original capacity. It was concluded that the specific capacitance originated highly from compound phenomena of the pseudocapacitance by oxidation-reduction of polypyrrole and the nonfaradaic capacitance by adsorption-desorption of activated carbons.