• The Korean Journal of Pain
• /
• v.29 no.2
• /
• pp.103-109
• /
• 2016

Background: The location and the number of lumbar sympathetic ganglia (LSG) vary between individuals. The aim of this study was to determine the appropriate level for a lumbar sympathetic ganglion block (LSGB), corresponding to the level at which the LSG principally aggregate. Methods: Seventy-four consecutive subjects, including 31 women and 31 men, underwent LSGB either on the left (n = 31) or the right side (n = 43). The primary site of needle entry was randomly selected at the L3 or L4 vertebra. A total of less than 1 ml of radio opaque dye with 4% lidocaine was injected, taking caution not to traverse beyond the level of one vertebral body. The procedure was considered responsive when the skin temperature increased by more than $1^{\circ}C$ within 5 minutes. Results: The median responsive level was significantly different between the left (lower third of the L4 body) and right (lower margin of the L3 body) sides (P = 0.021). However, there was no significant difference in the values between men and women. The overall median responsive level was the upper third of the L4 body. The mean responsive level did not correlate with height or BMI. There were no complications on short-term follow-up. Conclusions: Selection of the primary target in the left lower third of the L4 vertebral body and the right lower margin of the L3 vertebral body may reduce the number of needle insertions and the volume of agents used in conventional or neurolytic LSGB and radiofrequency thermocoagulation.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.250-265
• /
• 2007

In this paper, a fast intermode decision scheme is introduced by efficiently performing the mode decision using statistical hypothesis testing for hierarchical B-picture coding of SVC, in which much computational power is expensed for combined variable block sizes and hierarchical B-pictures. The hypothesis testing in the proposed method is performed on $16{\times}16\;and\;8{\times}8$ blocks to have early termination for RD computation of all possible modes. The early termination in intermode decision is performed by comparing the pixel values of current blocks and corresponding motion-compensated blocks. The proposed scheme exhibits effective early termination behavior in intermode decision and leads to a significant reduction up to 69% in computational complexity with slight increment in bit amounts. The degradation of visual quality turns out to be negligible in terms of PSNR values.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.121-126
• /
• 2013

Purpose: The aim of this research was to investigate difference in shear bond strengths of full-contour zirconia layered with porcelain. Methods: Disk-shaped (diameter: 12.0 mm; height: 3.0 mm) zirconia were randomly divided into six groups according to the surface conditioning method to be applied (N=90, n=15 per group): group 1-contol group(ZC); group 2-airborne particle abrasion with $50-{\mu}m\;Al_2O_3(5A)$; group $3-50-{\mu}m\;Al_2O_3$ + liner(5AL), group $4-110-{\mu}m\;Al_2O_3(1A)$; group $5-110-{\mu}m\;Al_2O_3$ + liner(1AL); group 6-liner(LC). On each block, zirconia porcelain was build up according to manufacturer's instructions. All samples were fixed with measuring jigs and shear bond strength were measured with Universal testing machine. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: LC showed the highest value($29.92{\pm}2.55$ MPa) and ZC showed the lowest value($13.22{\pm}1.37$ MPa). Zirconia liner and Alumina oxide groups was significantly higher shear bond strength than control(p<0.05). 5A (without liner $22.18{\pm}2.37$, with liner $22.84{\pm}1.74$ MPa) was higher shear bond strength than $110{\mu}m$ (without liner $20.18{\pm}2.38$, with $20.71{\pm}2.67$). Conclusion: Surface treatments may have advantage in bond strength improvement for full-contour zirconia layered with porcelain.

• The Research Journal of the Costume Culture
• /
• v.18 no.2
• /
• pp.371-381
• /
• 2010

The pine needles can be used for four seasons in normal living and it can be taken friendly everywhere as it is distributed over 50% in Korea. The pine needles consist of vitamins, protein, minerals, essential oil and enzyme related to antimicrobial activity. It has effect like high blood pressure, neuralgia and hanged over by terpene, glucokinin, rutin, apigenic acid and tannin. Also the extract of them can be used for dyeing of fabrics. However, the extract components and effects of them are not well known yet. Therefore, the purpose of this study was to investigate the volatile components of the pine needles extract and functionality. The pine needles extract was dyed into various fabrics(nylon, silk, wool and soybean) and mordanted with Al, Cu, Cr, Fe and Sn. The extracted aroma compounds were compared by gas chromatography-mass spectrometry. The major volatile compounds of pine needles verified by using SPME were alpha-pinene, beta-pinene, beta-phellandrene, caryophyllene, ethanon, benzen. A total of 15 compounds were identified by using the SPME fibers. In the UV-visible spectra, the maximum absorption of wavelength of the pine needles ethanol extract appeared at 460, 630nm for chlorophyll component and at 237, 281nm for tannin component with the pine needles distilled water extract. Most of sample showed high antibacterial effect in none mordant but wool fabric showed high antibacterial effect in mordants. The result of UV block test showed a superior ability of blocking ultraviolet ray infiltration in all sample.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.897-900
• /
• 2008

As the further development of economic globalization and the continued opening up of international construction markets, many of the countries are faced with more and more severe domestic and international construction market competition. It has been a focus question of all the countries and regions that how to achieve maximal profit in the international construction market, but construction claims are growing into a stumbling block to the project participants to reach their expected goals. Thus, the management of construction claims is considered as the greatest challenge that is facing constructors in today's vacillating business environment. Recently, many of the methodologies have been developed for the construction claims to overcome these current problems, but compared to the developed countries there is still a big gap in some Asian countries, such as China and Korea. This paper attempted to investigate and compare the project claims system in these two countries to figure out the common points and differences.

• The Journal of Korean Medicine
• /
• v.20 no.3 s.39
• /
• pp.66-76
• /
• 1999

The purpose of this study was to asses the etlect of Uncaria rhynchophylla (UR). one of the oriental herbs having a capability to block calcium channels, on affecting vestibular compensation (VC) in Sprague - Dawley rats. Animals were divided into a drug treatment group receiving, UR per oral for 10 days preceding unilateral labyrinthectomy (ULX) and a control group with saline ingestion, To evaluate behavioral changes. horizontal spontaneous nystagmus (SN) and roll head tilt (RHT) were recorded by a video camem with zoom lens in the course of vestibular compensation (VC). Immunohistochemical staining was performed by conventional ABC method to visualize cFos-like immunoreactive (cFLI) neurons in the medial vestibular nuclei (MVN) and cFLI cells were counted by image analyzer. Bodyweight was increased significantly, about 35g, by UR treatment for 10 clays before ULX. Compared with the control group, the drug group showed significant reduction of RHT 6 hrs after ULX as well as fast disappearance of SN at early stages of vestibular compensation. Also, recovery of the spatial and temporal cFLI expressions in the bilateral MVN was accelerated 24 hrs after ULX. These results suggest that Uncaria rhynchophyila has a beneficial effect to ameliorate vestibular compensation in unilateral labryinthectomized rats.

• The Korean Journal of Pain
• /
• v.2 no.1
• /
• pp.57-60
• /
• 1989

The Melkersson-Rosenthal (M-R) syndrome consists of a triad of (1) recurrent peripheral facial nerve paralysis which develops alternately on both sides of face, (2) non-inflammatory facial edema, and (3) fissuring of tongue. A 59 years old female patient developed the left facial palsy on September, 1988. Right facial palsy developed continuously 2 months later after the spontaneous remission of left facial palsy. On February, 1989, we have found out M-R syndrome which accompanied with migraine type of intermittent headache, and hypertension in one attack of cerebral stroke several years ago, there were no diabetes mellitus, pulmonary tuberculosis and brain tumor in clinical studies. Although the causes of this syndrome were not noted, we performed the stellate ganglion block and transcutaneous electrical nerve stimulation for treatment of the palsy, but the clinical effectiveness of these were not satisfactory.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.111-118
• /
• 2015

This research aims to utilize lapilli from the Mt. Baekdusan as environmently-friendly construction material. First of all, the neutralizing method for fabricating lapilli-cement-mixed bioblock was examined. And then, by use of the neuralized bioblock with microorganism for water purification, the growth inhibition effect against the pathogenic coliform bacillus was evaluated. The result regarding growth inhibition effect on pathogenic coliform bacillus indicates that the pretreatment condition, which is a concurrent procession with aqueous solution of 10% di-ammonium Phosphate after water curing, led to pH degraded below 10 which was the target value. Therefore it was concluded that the method was effective on bio-block neutralization. The microorganisms purifying water and di-ammonium phosphate were detected through the examination for microorganism existence on the bioblock, therefore it was concluded that the bioblock composed of lapilli and cement is able to be utilized in various structures as an environment friendly construction material.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.57-61
• /
• 2015

This paper proposes a fast intra prediction algorithm for the High Efficiency Video Coding (HEVC). HEVC has 35 modes, such as DC mode, Planar mode, and 33 angular modes for the intra-prediction. To reduce the complexity and to support fast decision for intra prediction, this paper proposes a hierarchical mode decision method (HMD). The proposed HMD mainly focuses on how to reduce the number of prediction modes. The experimental results show that the proposed HMD can reduce the encoding time about 39.17% with little BDBR loss. On average, the proposed HMD can achieve the encoding time saving e about 14.13 ~ 19.37% compared to that of the existing algorithms with slightly increasing 0.01 ~ 0.42% BDBR.