• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.8-14
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method and section bobbin for CM choke capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In the future, the CM chokes of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Adapter and so on.

• Tribology and Lubricants
• /
• 제27권6호
• /
• pp.293-301
• /
• 2011

Understanding of the tribological characteristics of polytetrafluoroethylen (PTFE) and ultra-high-molecular-weight polyethylene (UHMWPE) is crucial for their applications such as bearing and total joint replacement. In this work, the effect of the surface roughness of carbon steel on the tribological behaviors of PTFE and UHMWPE was experimentally investigated by using block-on-ring tribotester with friction force monitoring capability. It was found that that the amount of material transfer layers of PTFE formed on the carbon steel was significantly larger than those of UHMWPE, which was responsible the lower friction coefficient of PTFE. It was also concluded that the effect of surface roughness of carbon steel on the friction coefficient of UHMWPE was more significant than that of PTFE. For UHMWPE, it was found that the effect of surface roughness of counterface was varied with respect to applied normal force and sliding as well. Based on Archard's wear law, the wear coefficient of PTFE and UHMWPE was calculated to be $3{\times}10^{-5}$ ~ $8{\times}10^{-5}$ and $7{\times}10^{-6}$ ~ $2{\times}10^{-5}$, respectively.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권9호
• /
• pp.483-490
• /
• 2005

플래시 메모리는 비 휘발성(non-volatility), 빠른 접근 속도, 저전력 소비, 그리고 간편한 휴대성 등의 장점을 가지므로 최근에 많은 임베디드 시스템에서 많이 사용되고 있다 그런데 플래시 메모리는 그 하드웨어 특성상 플래시 변환 계층(FTL. flash translation layer)이라는 시스템 소프트웨어를 필요로 한다. 이 FTL의 주요 기능은 파일 시스템으로부터 내려오는 논리 주소를 플래시 메모리의 물리 주소로 변환하는 일이다. 본 논문에서는 STAFF(State Transition Applied Fast Flash Translation Layer)라 불리는 FTL 알고리즘을 제안한다. 기존의 FTL 알고리즘에 비하여 STAFF는 적은 메모리를 필요로 하면서 기존 일반 방법인 블록 사상 방법에 비하여 5배 정도 좋은 성능을 보인다. 본 논문에서는 기존 FTL 알고리즘과 STAFF의 성능 비교를 보였다.

• 한국정보통신학회논문지
• /
• 제11권4호
• /
• pp.779-785
• /
• 2007

비디오 감시를 위한 움직이는 객체의 검출은 매우 중요하다. 많은 환경에서 움직임은 관심 있는 움직임과 관심없는 움직임으로 나눌 수 있다. 관심 있는 움직임을 갖는 연구는 이미 많은 논의가 있어 왔다. 이 논문에서, 우리는 최신의 MPEG-4 EPZS 알고리즘을 이용한 움직임 벡터로부터 많은 움직임을 갖는 블록 영상을 구한 뒤, 시간에 대한 가중치를 부여한 차 영상과의 결합에 의한 복합적인 환경에서의 현저한 움직임 검출 방법을 제안한다. 우리의 방법은 기존의 배경 차 방법과 비교하여 눈에 띄게 좋은 결과영상을 얻을 수 있었다. 제안된 검출 방법은 다른 움직임의 간섭이 있는 복잡한 환경에서의 객체검출에 매우 효과적이다.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.32-41
• /
• 1994

선박해양공학연구센터 예인수조에서 시험되었던 선박 가운데 선형과 프로펠러가 모형과 실선이 동일하였던 36척에 대하여 모형선-실선상관해석을 수행하였다. 뚱뚱한 선형이 대부분임에도 불구하고, 타수조의 결과보다 약간 나은 일치를 보였다. 통계적 처리에 의하여 반류비 수정계수와 거칠기 수정계수에 대한 회귀식을 구하였고, Townsin의 거칠기계수를 적용한 경우의 저항수정계수에 대한 식을 도출하였다.

• Parasites, Hosts and Diseases
• /
• 제58권6호
• /
• pp.689-694
• /
• 2020

Strongyloidiasis is caused by Strongyloides stercoralis and is one of the most neglected tropical diseases in tropical and subtropical regions. Although several strongyloidiasis cases have been reported in Korea, genetic analysis of Korean isolates is still incomplete. In this study, a parasite was isolated from a 61-year-old man diagnosed with strongyloidiasis during the treatment of lymphoma on his retroperitoneal lymph node. Diffuse symmetric wall thickening from the ascending to descending colon and a nematode-infected intestine was observed following microscopic examination. Genomic DNA was isolated from a patient tissue block, and S. stercoralis was identified by PCR and sequencing (18S rDNA). In order to determine phylogenetic location of a Korean isolate (named KS1), we analyzed cox1 gene (500-bp) and compared it with that from 47 previous S. stercoralis isolates (28 human isolates and 19 canid isolates) from Asian countries. Our results showed that phylogenetic tree could clearly be divided into 5 different groups according to hosts and regions. KS1 was most closely related with the Chinese isolates in terms of genetic distance.

• PNF and Movement
• /
• 제18권3호
• /
• pp.445-452
• /
• 2020

Purpose: The purpose of this study was to evaluate the analysis of the association between upper extremity function and the Wolf Motor Function Test (WMFT) for chronic hemiparetic stroke patients and investigate the evidence of the WMFT as a clinical tool of upper extremity function in individuals with chronic hemiparetic stroke. Methods: This study applied an observational, cross-sectional design in outpatients at three local rehabilitation units in Seoul. Forty-nine individuals who had a diagnosis of first stroke participated in this study. All participants were analyzed for four clinical measures, including the Box and Block Test (BBT), the WMFT, grip strength, and the Canadian Occupational Performance Measure (COPM). Results: Upon analysis, a significant relationship was found between the WMFT scores and BBT scores as well as the grip strength. The WMFT score was statistically and positively associated with the COPM satisfaction score; however, it was not related to the COPM performance score. Conclusion: The results of this study suggest that the WMFT is positively related to simple tasks, such as hand muscle strength and manual dexterity. However, the WMFT does not have a relationship with complex tasks, which are measured by COPM performance abilities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권4호
• /
• pp.1373-1391
• /
• 2022

We investigate mobile multiple-input multiple-output (MIMO) molecular communication via diffusion (MCvD) system which is consisted of two source nodes, two destination nodes and one relay node in the mobile three-dimensional channel. First, the combinations of decode-and-forward (DF) relaying protocol and network coding (NC) scheme are implemented at relay node. The adaptive thresholds at relay node and destination nodes can be obtained by maximum a posteriori (MAP) probability detection method. Then the mathematical expressions of the average bit error probability (BEP) of this mobile MIMO MCvD system based on DF and NC scheme are derived. Furthermore, in order to minimize the average BEP, we establish the optimization problem with optimization variables which include the ratio of the number of emitted molecules at two source nodes and the initial position of relay node. We put forward an iterative scheme based on block coordinate descent algorithm which can be used to solve the optimization problem and get optimal values of the optimization variables simultaneously. Finally, the numerical results reveal that the proposed iterative method has good convergence behavior. The average BEP performance of this system can be improved by performing the joint optimizations.

• 한국의류학회지
• /
• 제46권3호
• /
• pp.390-406
• /
• 2022

This study aims to establish the optimal environmental conditions for storing textile products. Four textile products (cotton, wool, nylon, cotton/polyurethane) were used to produce experimental fabrics according to artificial contamination and washing conditions. Each fabric was subjected to three environmental conditions (A: 20-25℃/20% RH, B: 20-25℃/50% RH, C: 30-35℃/65% RH) for 4-12 weeks. Changes in textile characteristics include tensile strength, wrinkle recovery rate, and odor intensity. Results show that the change in tensile strength for the four test fabrics slightly decreased with a storage time of 4 to 12 weeks. The wrinkle recovery rate of the fabrics was the lowest under the C condition. UV exposure causes a substantial decrease in the tensile strength of the textiles. The change in odor characteristics was the highest for the odor intensity in the C condition. For storing textile products for sustainable management, it is desirable to maintain a temperature of 20 to 25℃ with a relative humidity of 50% RH or less and to provide ventilation in an enclosed storage space that can also block UV rays.

• Journal of Forest and Environmental Science
• /
• 제39권2호
• /
• pp.96-104
• /
• 2023

The successful restoration program requires a comprehensive understanding of variables influencing seedling efficiency. Below-ground is hypothesized to have a major impact on seedling performance of species when planted in agriculture, and degraded areas with different types of mulching. This study investigated on Sg. Terla Forest Reserve in Cameron Highlands Pahang, Malaysia. In this study randomized complete block design (RCBD) was used. The excavation method was applied to study the root system development, above, and below ground biomass distributions under different types of mulching: coconut mulching (CM), oil palm mulching (OM), plastic mulching (PM) and control (CK). The root diameter, main root length, lateral root length, root coiling, and root direction toward to sun were recorded. The results in this study indicate that mulching had significant effect on root diameter, main root length, and root distributions among treatments while for lateral root length, root: shoot ratio, dry biomass distributions, and above and below ground biomass did not showed significant effect among treatments. The highest values for root diameter, lateral root length, main root length, root distributions, dry biomass distributions and above and below ground biomass were showed in CM treatments. However 75% of root coiling was observed in seedlings between treatments.