• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.706-714
• /
• 2020

Currently, 90 % of the world's population breathes air with a fine dust content exceeding the World Health Organization's annual average exposure limit (10 ㎍/㎥). Global efforts have been devoted toward reducing secondary pollutants and ultra-fine dust through regulations on nitrogen oxides released over land and sea. Domestic efforts have also aimed at creating clean marine environments by reducing sulfur emissions, which are the primary cause of dust accumulation in ships, through developing and distributing environment-friendly ships. Among the technologies for reducing harmful emissions from diesel engines, electrostatic precipitator offer several advantages such as a low pressure loss, high dust collection efficiency, and NOx removal and maintenance. This study aims to increase the durability of a ship by improving equipment quality through failure mode effects analysis for the preventive maintenance of an electrostatic precipitator that was developed for reducing fine dust particles emitted from the 2,427 kW marine diesel engines in ships with a gross tonnage of 999 tons. With regard to risk priority, failure mode 241 (poor dust capture efficiency) was the highest, with an RPN of 180. It was necessary to determine the high-risk failure mode in the collecting electrode and manage it intensively. This was caused by clearance defects, owing to vibrations and consequent pin loosening. Given that pin loosening is mainly caused by vibrations generated in the hull or equipment, it is necessary to manage the position of pin loosening.

• Journal of Bio-Environment Control
• /
• v.9 no.4
• /
• pp.230-236
• /
• 2000

For extension of storability, onion bulbs produced in Cheju Island were exposed to ${\gamma}$-ray irradiation at a dosage of 0, 3, or 6Krad and stored in a natural cavern, or in low (2$^{\circ}C$) or ambient temperature storage condition. Sprouting began from approximately five months in storage, regardless of storage condition, and increased as the storage period increased. From early August, sprouting as high as 50% occurred in the natural storage cavern, and 20% in ambient temperature storage when bulbs were treated with 0 krad ${\gamma}$-ray. However, bulbs treated with 3 or 6krad ${\gamma}$-ray did not any sprouting until six months in storage. No significant weight loss was observed in all treatments until sprouting occurred from 40 days after the initiation of storage. Weight loss, however, increased remarkably after 40 days in storage, indicating that it was closely related to sprouting during storage. Bulbs stored at 2$^{\circ}C$ showed 5~10% rot, but were still edible. Percent rot reached to as high as 50% in bulbs unirradiated and stored at ambient temperatures after seven months, while it in irradiated bulbs reached to 5, 33, and 30% at 2$^{\circ}C$, in a natural cavern, and ambient temperatures, respectively. Sugar contents slightly increased in irradiated bulbs in the later storage period under ambient temperatures, while sugar contents in irradiated bulbs in the later storage period under ambient temperatures, while sugar contents in Allium vegetables generally decrease in later storage if unirradiated. Sulfur content slightly increased in irradiated bulbs in the early storage period and decreased gradually in all treatments in the later storage stage.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.317-324
• /
• 2008

This study investigated the effect of 12 different commercial yeast strains on the characteristics of fermentation and wine quality. All yeast strains had more rapid fermentation at higher temperatures. Wines fermented with the AR2, EC-1118, Premier Cuvee, and RC212 strains had faster sedimentation rates than wines fermented with the other strains. Wines fermented with EC-1118, Montrachet, and Primeur had low titratable acidity whereas wines fermented with D47 and VR5 had high titratable acidity. There was a correlation (r = 0.826) between tannin content and wine redness. Wines fermented with Fermivin, Montrachet, Primeur, VR5, Noble, and Merit strains produced lower levels of sulfur dioxide during fermentation. Wines fermented with D47, K1V-1116, AR2, and VR5 had high concentrations of glycerol, a compound known to add to "mouth feel". Wines fermented with the Fermivin, Montrachet, and Noble strains had lower concentrations of volatile acids than wines fermented with the other strains.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1015-1020
• /
• 2012

Lignite of low rank coal and petroleum coke of high sulfur content can be high potential energy sources for coal gasification process because of their plentiful supply. The steam gasification of lignite, anthracite, and pet coke has been carried out in both an atmospheric thermobalance reactor and a lab-scale fludized bed reactor (0.02 m i.d. ${\times}$ 0.6 m height). The effects of gasification temperature ($600{\sim}900^{\circ}C$) and partial pressure of steam (0.15~0.95 atm) on the gasification rate and on the heating value of product gas have been investigated. The modified volumetric reaction model was applied to the experimental data to describe the behavior of carbon conversion, and to evaluate kinetic parameters of char gasification. The results shows that higher temperature bring more hydrogen in the product syngas, and thus increased gas heating value. The feed rate of steam is needed to be optimized because an excess steam input would lower the gasification temperature which results in a degradation of fuel quality. The rank of calorific value of the product gas was anthracite > lignite > pet coke. Their obtained calorific value at $900^{\circ}C$ with 95% steam feed were 10.0 > 6.9 > 5.7 $MJ/m^3$. This study indicates that lignite and pet coke has a potential in fuel gas production.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.412-417
• /
• 2015

This study was carried out to investigate the effect of steam-drying method on physicochemical properties and antioxidant activities of Alliun hookeri root (AHR). Moisture, crude protein, crude fat, and crude ash contents of raw and steam-dried AHRs were 10.91~14.15%, 11.14~13.49%, 0.83~3.02%, and 7.55~8.98%, respectively. Sulfur contents of steam-dried AHRs were 2.0 and 2.2 times lower than that of raw AHR (0.51%), respectively. pH and total sugar contents of AHRs were reduced by steam-drying, whereas titrate acidity and browning intensity were increased. The L and b values of AHRs in Hunter's value were also reduced, but a value was increased by steam-drying. Among hot water extracts from raw and steam-dried AHRs, four times steam-drying showed the lowest $EC_{50}$ values (0.44, 9.01, and 0.48 mg/mL, respectively) in DPPH radical assay, ABTS radical assay, and reducing power, whereas four times steam-drying had the highest total phenolic content ($34.47{\mu}g/mg$) and browning intensity (2.05 and 0.20 at 280 and 420 nm, respectively). The antioxidant activities of hot water extracts from raw and steam-dried AHRs were closely correlated with their total phenolic contents and browning intensity, showing coefficient of determination ($R^2$) values higher than 0.87. From the results, we suggest that steam-drying method could be used as an effective process for increasing the antioxidant activity of AHR.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.362-368
• /
• 2016

In the recent International Maritime Organization's (IMOs) Maritime Safety Committee's 93rd session, the International Chamber of Shipping and International Parcel Tankers Association addressed marine fuel oil quality problems: increasing diluents in marine fuel oil, ignition in engine rooms due to the low flash point of fuel oil, and marine fuel oils that can damage marine engines. To deal with these marine fuel oil quality problems, the International Maritime Organization secretariat appointed the worlds marine fuel oil monitoring institute and constituted a correspondence group to determine the fuel oil quality required by MARPOL Annex VI regulation 14.8 (sulfur content less than 0.5%). In this study, basic research that can help with responding to marine fuel quality issues and the IMO's work is conducted. In order to perform this basic research, the off-spec ratio related to the fuel oil quality standard (ISO 8217:2012), density distribution tendency, gross specific energy, and correlation between components in the fuel oil are analyzed through actual marine fuel oil (residual marine fuel) data from the Port of Singapore.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.528-534
• /
• 1992

Growth stimulatory material for lactic acid bacteria was extracted from radish and radish green juice and its growth stimulatory effect was tested. Dried methanol-precipitated growth stimulatory material was lightly grayish white powder, Its ash content is 44% and approximately 50% of the ash is sulfur. It has reddish brown color upon solubilization in water. The material had unchanged stimulatory effect when it was treated with proteinase or pectinase, or ashed. The growth stimulatory activity was dialyzable. The material was able to counteract the growth inhibitory effect of EDTA. When selected lactic acid bacteria were grown at $30^{\circ}C$ for 24 hours in peptone(0.5%)-yeast extract(0.5%)-glucose(2%) broth with and without 0.5% growth stimulatory material, the material stimulated the growth of Lactobacillus plantarum, L. fermentum, L. leichmanii, L. sake, L. brevis, L. acidophilus, L. casei, Pediococcus pentosaceus, Leuconostoc mesenteroides, Streptococcus faecalis, S. lactis, S. cremoris and S. thermophilus by 19, 1833, 133, 444, 840, 32, 14, 18, 6, 17, 4, 5 and 4 times, respectively.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.104-113
• /
• 1997

This study aims to develop an analysis model using a commercial process simulator-ASPEN PLUS for an IGCC (Integrated Gasification Combined Cycle) system consisting a dry coal feeding, oxygen-blown entrained gasification process by Shell, a low temperature gas clean up process, a General Electric MS7001FA gas turbine, a three pressure, natural recirculation heat recovery steam generator, a regenerative, condensing steam turbine and a cryogenic air separation unit. The comparison between those results of this study and reference one done by other engineer at design conditions shows consistency which means the soundness of this model. The greater moisture contents in Illinois#6 coal causes decreasing gasifier temperature and the greater ash and sulfur content hurt system efficiency due to increased heat loss. As the results of sensitivity analysis using developed model for the parameters of gasifier operating pressure, steam/coal ratio and oxygen/coal ratio, the gasifier temperature increases while combustible gases (CO＋H2) decreases throughout the pressure going up. In the steam/coal ratio analysis, when the feeding steam increases the maximum combustible gas generation point moves to lower oxygen/coal ratio feeding condition. Finally, for the oxygen/coal ratio analysis, it shows oxygen/coal ratio 0.77 as a optimum operating condition at steam/coal feeding ratio 0.2.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.140-146
• /
• 2017

It is laser induced breakdown spectroscopy(LIBS) that enables qualitative and quantitative analysis of the elements contained in unknown specimen by comparing the wavelength characteristics of each element obtained from the spectral analysis of the standard specimen with the wavelength analysis results from unknown specimens. In this study, the applicability of LIBS to the analysis of major deterioration factors affecting concrete durability was experimentally analyzed. That is, the possibility of applying LIBS to the diagnosis of concrete deterioration by studying the quantitative detection of harmful deteriorating factors on chloride, sulfate and carbonated mortar specimens using LIBS was studied. As a result of LIBS test for each chloride and sulfate specimen, the LIBS spectral wavelength intensity of chlorine and sulfur ions increased linearly with increasing concentration. Carbon ion LIBS spectral wave intensities of carbonated specimens increased nonlinearly over the duration of carbonation exposure. From the above results, it can be partially confirmed that LIBS can be applied to the diagnosis of concrete deterioration. In case of concrete carbonation, it is presumed that carbon content is contained in the cement itself and is different from the detection of chloride and sulfate specimen. Therefore, it is considered that more various parameter studies should be performed to apply LIBS to concrete carbonation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.1 s.28
• /
• pp.93-102
• /
• 2007

Particle materials sink in bottom and dissolved inorganic substances release from sediment and many kinds of materials continuously exchange in sediment and water column as well as transfer and transformation in sediment. The study of sediment quality means the state of sediment pollution relation of the water quality, sediment biota, materials fluxes between sediment and water column, transformation of materials in sediment is being important in recent. The state of sediment quality imply that the history of water pollution for long time, because the sediment quality does not change temporally. The sediment quality of bottom water can be used as a good indicator of pollution at present and in future. The major index of sediment qualities are the content of nutrients and hazard materials such as metals, Ignition Loss (IL), Total Sulfur (TS), Oxidation Reduction Potential (ORP), sediment COD, color, odor and the release of nutrients from sediment. However, there are some arguments between researchers about compare to estimation of sediment quality and sampling and analysis of sediment. In this study, I will introduce the method of sediment sampling, analyzing and estimating of the sediment pollution.