시멘트 산업은 대표적인 탄소 배출 산업으로서, 콘크리트에 산업부산물인 고로슬래그 미분말과 플라이애시를 다량 사용할 경우 시멘트 사용을 줄이고 탄소 배출을 저감할 수 있으나, 이러한 경우 초기강도의 저하가 비교적 크기 때문에 대체량 증대에 한계가 있다. 이러한 현실을 고려할 때 고로슬래그 미분말이나 플라이애시를 다량 활용한 포틀랜드 혼합 시멘트에 적절한 알칼리 활성화를 통해 혼합 시멘트의 성능을 보완하는 방안은 시멘트 산업 분야에서 탄소 배출을 저감할 수 있는 현실적인 방안이 될 수 있다. 이에 따라 본 보고에서는 보통포틀랜드 시멘트, 고로슬래그 미분말, 플라이애시를 4:4:2로 혼합하고 알칼리 설페이트계 활성화제(Modified Alkali Sulfate type)를 2.0% 사용한 결합재를 적용하여 레미콘(Ready-Mixed Concrete) 제조 시설에서 콘크리트를 제조하고 그 기초적인 특성을 평가하였다. 그 결과 알칼리 설페이트계 활성화제의 활용으로 슬럼프는 다소 감소하고 응결 시간이 단축되는 현상이 있었으나, 블리딩이 감소하고 조기 강도가 개선되었으며, 탄산화 저항성은 큰 차이가 없었다. 향후 이와 관련하여 장기 재령의 시험체를 대상으로 한 실험과 분석이 지속적으로 이루어져야 할 것으로 판단된다.
콩 근류균(根瘤菌) B. japonicum의 취락형태(聚落形態)에 따라 항생제반응(抗生劑反應)과 혈청형(血淸型) 및 단백질(蛋白質) 전기영동(電氣泳動) 유형(類型)에 차이가 있을지 여부를 구명(究明)코자 우리나라 남부지방에 분포한 토착근류균(土着根瘤菌)을 대상으로 시험한 결과는 다음과 같았다. 1. 분리(分離)한 B. japonicum 120균주(菌株) 취락형태별(聚落形態別) 분포(分布)는 "Dry"형이 47%, "Wet"형이 41%, "Dry/Wet"형이 12%였다. 2. 항생제(抗生劑) 반응(反應)에 있어서 "Dry"형의 균주(菌株)는 chlorampenicole(200ug/ml)과 kanamycin(20ug/ml)에 대하여. "Wet"형은 erythromycin(100ug/ml)과 nalidixic acid(20ug/ml), spectinomycin sulphate(100ug/ml), streptomycin sulphate(10ug/ml), tetracycline(100ug/ml)에 대하여 각각(各各) 높은 내성(耐性)을 보였다. 3. B. japonicum의 취락형태별(聚落形態別)로는 혈청형(血淸型)의 구분(區分)을 보이지 않았으나, 각 혈청형(血淸型)에 속하는 균주중(菌株中)에는 혈청모균주(血淸母菌株)와 동일한 취락형태(聚落形態)를 가진 것이 많았다. 4. B. japonicum의 혈청학적(血淸學的) 분류결과(分類結果)는 단백질전기영동상(蛋白質電氣泳動上)의 밴드유형과 같았으며 특히, 복잡성(複雜性)에 있어서는 가장 복잡하였던 항생제반응(抗生劑反應) 유형(類型)과 지나치게 단순하였던 취락형태적(聚落形態的) 구분이 중간정도(中間程度)를 나타내어 실용성(實用性)을 보였다. 5. B. japonicum의 취락형태별(聚落形態別) 특성은 항생제반응(抗生劑反應)에서는 특이적(特異的)이었으나 혈청학적(血淸學的) 특성(特性) 및 단백질(蛋白質) 전기영동(電氣泳動) 유형(類型)에서는 다양(多樣)한 경향이었다.
본 연구에서는 원심성형 기법을 이용하여 구조용 콘크리트 각형보를 개발하였으며, 단면의 휨강성을 확보하기 위하여 단면의 중공률은 10 %이하로 하며 이를 위하여 기존의 빈배합상태의 콘크리트가 아닌 고슬럼프(150~200)의 물성을 갖으며 설계강도가 100 MPa이상인 콘크리트 배합비를 개발하여 적용하였다. 피암터널이나 라멘소교량의 상부구조로 활용될 원심성형 PSC 각형보의 내구성을 조사하기 위하여 압축⧵강도 100 MPa급 초고강도 원심성형 콘크리트의 열화 및 내화학적 특성에 대한 내구성능을 평가하였다. 2022년과 2023년에 제작한 원심 성형 각형보 시험체에 대하여 염화물침투 저항성, 촉진탄산화 , 황산염침식 저항성, 동결융해 저항성, 스케일링 저항성 등 콘크리트의 내구성 시험을 수행하였다. 본 연구에서 검증한 내용을 고려해 볼 때 추후 제작단계에서 수밀성이 높아지는 원심성형 콘크리트의 내구성은 일반적인 콘크리트에 비해 우수한 것으로 조사되었다.
Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.
An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. The Ni contact was formed on the front grid pattern by electroless plating followed by anneal ing at $380{\sim}400^{\circ}C$ for $15{\sim}30$ min at $N_{2}$ gas to allow formation of a nickel-silicide in a tube furnace or a rapid thermal processing(RTP) chamber because nickel is transformed to NiSi at $380{\sim}400^{\circ}C$. The Ni plating solution is composed of a mixture of $NiCl_{2}$ as a main nickel source. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. The Ni/Cu contact was found to be well suited for high-efficiency solar cells and was successfully formed by using electroless plating and electroplating, which are more cost effective than vacuum evaporation. In this paper, we investigated low-cost Ni/Cu contact formation by electroless and electroplating for crystalline silicon solar cells.
Starch로부터 ethanol을 직접적으로 발효 생산할 수 있는 새로운 효모 균주를 개발하고자 glucoamylase 생성균으로 알려진 Saceharomyces diastaticus의 glucoamylase gene을 cloning vector를 사용하지 않고 S, cerevisiae에 transformation시켰다. Li$_2$SO$_4$, 처리로써 competent화 한 S, cerevisiae의 Intact cells을 recipient로 하여 BamHI으로 partial digestion한 S, diastaticus의 chromosomal DNA를 transformation시키고 starch를 유일한 탄소원으로 함유한 최소 배지상에서 starch 자화능을 marker로 하여 transformant를 선별한 결과, 8.5$\times$$10^{-7}$ 빈도로 transformant를 얻었다. Transformant의 특성을 recipient 및 donor와 비교하기 위해 copper resistance와 당 발효능을 조사한 결과, donor인 S, diastaticus와 동일한 성질로서 표현된 maltose와 starch 발효능을 제외하고는 800ppm 농도까지 생육 가능한 copper resistance와 galactose 발효능 등에 있어서는 recipent와 동일하게 나타났다. 또한 transformant가 생성하는 glucoamylase의 그 작용에 있어서의 최적온도와 최적pH를 조사하여 본 바 각각 pH5.0, 50C로서 donor의 glucoamylase와 동일함을 알 수 있었다.
Interest in flexible transparent conducting films (TCFs) has been growing recently mainly due to the demand for electrodes incorporated in flexible or wearable displays in the future. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance on PET substrates is researched Arc-discharge SWNTs were dispersed in deionized water by adding sodium dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then was doped with Au-ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. This was confirmed and discussed on the XPS and UPS studies. We show that 87 ${\Omega}/{\Box}$ sheet resistances with 81% transmittance at the wavelength of 550nm. The changes in electrical and optical conductivity of SWNT film before and after Au-ionic doping treatments were discussed. The effect of Au-ion treatment on the electronic structure change of SWNT films was investigated by Raman and XPS.
An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electro less plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. In this paper, we investigated low-cost Ni/Cu contact formation by electro less and electroplating for crystalline silicon solar cells.
미세 회로 기판 제조에 적용되는 습식공정 중 도금조에서 미세 기판의 정밀한 가공을 위해 산성용액 반응조 내부의 유동특성을 관찰하는 것이 중요하다. 하지만, 상용 유속계 중 내산성을 갖춘 센서가 거의 없어 측정이 매우 어렵다. 본 연구에서는 내산성을 갖는 압저항 센서에 신호처리 기술을 적용하여 유속을 측정할 수 있는 센서를 개발하였다. 상용유속계 수준의 유속데이터 획득을 위해서는 높은 임피던스를 갖는 압저항 센서에 증폭회로 및 저역통과필터를 부착하였으며, 이 때 사용되는 신호처리회로의 출력과 상용유속계의 출력이 일치되도록 하는 신호처리회로의 선정을 위해 Butterworth, Bessel, Chebyshev 필터 회로를 제작하여 유속 측정을 통해 출력을 상용유속계의 출력과 비교한 결과 0.0128 %, 0.0023 %, 5.06 %의 MSE를 확인할 수 있었다. 인가 유속을 변경하면서 내산성 센서의 측정 가능 영역을 확인해 본 결과, 저속 저압 구간에서는 신호와 노이즈 구분이 어려워 신호 처리 알고리즘을 적용해도 원하는 결과를 얻지 못하였고, 2~6 m/s에서 2.7 % 미만의 오차를 갖는 신뢰성 있는 측정이 가능하였다.
본 연구는 제주도 현무암 골재에 대해 콘크리트용 굵은 골재로서의 품질기준의 적합성을 평가하였다. 골재의 품질 평가는 KS 기준에서 요구하는 골재안정성, 골재마모저항성, 골재파쇄성 실험을 하였다. 더불어, 현무암 골재의 성분 분석을 위해 XRD, XRF, Porosity를 분석하였으며, 현무암의 강도는 콘크리트용 굵은 골재로서 다른 지역에서 주로 사용되는 화강암, 안산암 그리고 사암의 압축 및 인장강도 결과 값과 비교 평가하였다. 전반적으로, 골재의 기계적 특성 평가 결과, 일부 지역의 현무암 골재는 KS 기준을 만족하지 못하였다. 그러나 제주지역의 현무암의 압축강도와 인장강도는 타 지역의 암석보다 높았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.