• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.3
• /
• pp.170-178
• /
• 2016

It is not clear how to apply the climate scenario to assess the impact of climate change in the agricultural sector. Even if you apply the same scenario, the result can vary depending on the temporal-spatial downscaling, the post-treatment to adjust the bias of a model, and the prediction model selection (used for an impact assessment). The end user, who uses the scenario climate data, should select climate factors, a spatial extend, and a temporal range appropriate for the objectives of an analysis. It is important to draw the impact assessment results with minimum uncertainty by evaluating the suitability of the data including the reproducibility of the past climate and calculating the optimum future climate change scenario. This study introduced data processing methods for reducing the uncertainties in the process of applying the future climate change scenario to users in the agricultural sector and tried to provide basic information for appropriately using the scenario data in accordance with the study objectives.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.68-77
• /
• 2011

Flood disasters on the metropolis where population and facilities were densely concentrated cause an enormous damage, therefore it is important to find risk and vulnerable area for floods, and then mid-long term disaster reduction plan should be established by the results. However, there is no rational method which reflects urban characteristics to estimate the regional safety for flood. so it is necessary to develop the standardized method of regional safety assesment due to urban flood. The proposed regional safety assesment model in this study was combined risk and mitigation score which consisted of three and two element, and 12 assesment factors which effect flood disasters were selected. And then the integrated regional safety was estimated by subtracting mitigation score from risk score. GIS tool was used to estimate the factor assesment and integrated regional safety. Developed regional safety assesment model was applied in Seoul to evaluate the suitability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.78-85
• /
• 2004

The non-planned development of the rural area surrounding the Metropolitan area has become a social problem. The land development program until now has an aspect of not combining the spacial plan and the environmental plan. The land use and city development system based on development should change into a form that combines developing the area and conserving the environment. Therefore, this research attempts to compare the results of the overlay analysis and the gravity matrix which are ways to evaluate the value land that has a high environmental conservation value. The research area is the town of Seonggeo-eup, Cheonan City, and the reason for selecting this area is because it is expected to be densely populated as a connected area to the Metropolitan and the development pressure, such as expanding the industrial area, is high due to convenient transportation. The environmental factors used in the research are the relative altitude, incline, age-class, natural degree of the ecology, classification of the land covering and the NDVI, and the research methods used are the overlay analysis of the GIS and the statistical method. The overlay analysis results showed level 1 13.2%, level 2 30.7%, level 3 47.4%, level 4 1.0%, level 5 2.4%, level 6 5.4% and so on. The gravity matrix was classified as level 1 27.0%, level 2 9.3%, level 3 58.2%, level 4 2.4%, level 5 2.3%, level 6 0.9% and so on. These results are more appropriate than current methods for plans that value the environment because the analyzed results of the gravity matrix have a tendency to highly condense the environmentally valuable area. Consequently, if the spacial and environmental plans combine and therefore expand the efficient use of the land in the current state where the nation's concern in environment is getting higher, it is thought that it will contribute highly on the development of the nation's life quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3859-3865
• /
• 2010

Modeling a virtual reader and tags, the emulator system is realized by using a commercial signal generation device to make signal, a data collection equipment, and DSP board. By using a Virtual UHF RFID (860 ~ 960 [MHz]) reader/tags module, a developed RFID reader, protocol of tag, and properties of RF support to provide the way how to verify the suitability to international standards (ISO 18000-6 Type C, EPCglobal C1G2). In this paper, to implement a proposed model reader and tag model, Visual DSP is applied by using DSP board, composing the system's signal generators, signal analyzers and performance verification, the target readers or tags, RFID emulator control computesr and control programs.

• Journal of Fashion Business
• /
• v.18 no.1
• /
• pp.118-131
• /
• 2014

The purpose of this study is to classify the service recovery fairness of internet fashion shopping mall depending on the type of shopping mall into 3 levels, and analyze their influence on customers' satisfaction and intention to repurchase. Data were collected from 271 customers who had made a complaint or raised a question about service among the customers, and was analyzed through AMOS 7.0. For hypothesis testing, a research model was set up in the form of structure equation model, and its suitability was investigated. The results of this research can be summarized as follows: First, in relation to the service recovery fairness at internet shopping mall, only the consequential fairness has a meaningful relationship with customer satisfaction. Second, it has been shown that the higher the customers' satisfaction with internet shopping mall, the more positive influence it has on intention to repurchase. Third, it has been shown that the influence of service recovery fairness on customers' satisfaction and intention to repurchase has a meaningful difference depending on the type of internet shopping mall. In other words, it has been shown that customer satisfaction is higher at open market than general internet shopping mall. In addition, it has been shown that in open market, only the consequential fairness has a meaningful influence, therefore it will be more effective to strengthen a strategy focused on economical rewards than other fields.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.7.1-7.10
• /
• 2015

Objectives For successful adoption of legislation controlling registration and assessment of chemical substances, it is important to obtain sufficient toxicological experimental evidence and other related information. It is also essential to obtain a sufficient number of predicted risk and toxicity results. Particularly, methods used in predicting toxicities of chemical substances during acquisition of required data, ultimately become an economic method for future dealings with new substances. Although the need for such methods is gradually increasing, the-required information about reliability and applicability range has not been systematically provided. Methods There are various representative environmental and human toxicity models based on quantitative structure-activity relationships (QSAR). Here, we secured the 10 representative QSAR-based prediction models and its information that can make predictions about substances that are expected to be regulated. We used models that predict and confirm usability of the information expected to be collected and submitted according to the legislation. After collecting and evaluating each predictive model and relevant data, we prepared methods quantifying the scientific validity and reliability, which are essential conditions for using predictive models. Results We calculated predicted values for the models. Furthermore, we deduced and compared adequacies of the models using the Alternative non-testing method assessed for Registration, Evaluation, Authorization, and Restriction of Chemicals Substances scoring system, and deduced the applicability domains for each model. Additionally, we calculated and compared inclusion rates of substances expected to be regulated, to confirm the applicability. Conclusions We evaluated and compared the data, adequacy, and applicability of our selected QSAR-based toxicity prediction models, and included them in a database. Based on this data, we aimed to construct a system that can be used with predicted toxicity results. Furthermore, by presenting the suitability of individual predicted results, we aimed to provide a foundation that could be used in actual assessments and regulations.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.637-647
• /
• 1993

Over 40 per cent Indian population needs to be attended for nutritional improvement. Traditional nutritious food resources though abundantly available but presently less used, if incorporated in the diets, can yield low-cost nutritionally balanced diets. The linear programming (LP)model was used for optimization of food resources to satisfy protein -energy requirements of hard working rural poor. Soybean-a highly nutritious food legume-available at reasonably low price was included along with chick -pea and pigeon -pea for comparison .The three cereals predominantly used in Indian diets -rice, wheat and sorghum -and three typical leafy vegetables namely, spinach , drumstick leaves and rajagira (Amaranths paniculantus) leaves were used for optimization . The contribution of food legume was restricted to supply only 50 per cent of daily protein requirement for maximum protein value. The quantities of other food stuffs namely , milk , sugar , tubers etc. were restricted to nati nal per capita availability. the nutrition satisfaction levels in per cent RDA by the model are 149-250 for protein , 51-106 for fat, 134-362 for iron an d143-1158 for Vitamin-A. Quantities of food legumes, cereals and leafy vegetables ranged from 289-601, 3000-3700 and 360-1200 g/day respectively for a reference family of five hard working rural poor. Daily food resources cost ranged from US$ 0.6 to 1.0 for the family. Amongst food legumes, soybean based diet combinations provide maximum nutritional benefits at minimum cost indicating its suitability for wider adoption by hard working poor.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.1-13
• /
• 2017

In this paper, a research model was designed to investigate the factors influencing the intention to use of mobile easy payment services in China. Our research model includes the service factors(instant connectivity, economic and security), social factors(subjective norms and image), the user's individual factors(self-efficacy personal innovativeness and suitability), perceived ease of use, perceived usefulness and intention to use. A survey was conducted to collect the data with users who have had the actual using experience about mobile easy payment services. In this research, the data were collected by online survey, and in final analysis, 439 users' questionnaires were used. The empirical paper proves research hypothesis by using SPSS 22.0 and AMOS 23.0. The results of the study are as follows: the mobile easy payment service factors, social factors and the user's individual factors partially give positive effects to perceived ease of use and perceived usefulness; perceived ease of use gives positive effects to perceived usefulness. In addition, perceived ease of use and perceived usefulness have positive effects to on intention to use.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.107-128
• /
• 2017

Energy is a major component of almost all economic, production, and service activities, and rapid population growth, urbanization and industrialization have led to ever growing demand for energy. Limited energy resources and increasingly evident environmental effects of fossil fuel consumption has led to a growing awareness about the importance of further use of renewable energy sources in the countries energy portfolio. Renewable hydrogen production is a convenient method for storage of unstable renewable energy sources such as wind and solar energy for use in other place or time. In this study, suitability of 25 cities located in Iran's western region for renewable hydrogen production are evaluated by multi-criteria decision making techniques including TOPSIS, VIKOR, ELECTRE, SAW, Fuzzy TOPSIS, and also hybrid ranking techniques. The choice of suitable location for the centralized renewable hydrogen production is associated with various technical, economic, social, geographic, and political criteria. This paper describes the criteria affecting the hydrogen production potential in the study region. Determined criteria are weighted with Shannon entropy method, and Angstrom model and wind power model are used to estimate respectively the solar and wind energy production potential in each city and each month. Assuming the use of proton exchange membrane electrolyzer for hydrogen production, the renewable hydrogen production potential of each city is then estimated based on the obtained wind and solar energy generation potentials. The rankings obtained with MCDMs show that Kermanshah is the best option for renewable hydrogen production, and evaluation of renewable hydrogen production capacities show that Gilangharb has the highest capacity among the studied cities.

• Journal of Biomedical Engineering Research
• /
• v.31 no.1
• /
• pp.56-66
• /
• 2010

The various total replacement artificial discs have developed because spinal fusion has shown a lesser mobility of an operated segment and an accelerated degeneration at adjacent discs. But almost artificial discs have not yet been reached on the substitute surgery of fusion because many problems such as those clinical success rates were not more than them of fusion have not solved. In this paper, vertically inserted assemble-screw fixture in vertebrae was proposed to improve the fixed capability of artificial disc. And also, to evaluate the design suitability of newly designed screw-type, including fixtures of commercial discs such as wedge and plate type, the 1/4 finite element model with a vertebra and various implanted fixtures were generated, and next, 3 bending motions such as flexion, bending and twisting under the moment of 10Nm and compression under the force of 1000N were considered, respectively and finally, FE analyses were performed. Results of three fixture types were compared, such as Range of Motion and maximal stress, and so on. For ROM, the screw type was average 58% less than the wedge type and was average 42% less than the plate type under all loading conditions. For average stress ratio at closer nodes between vertebra and each fixture, the wedge type was the lowest as minimum 0.02 in twisting, screw types were the highest as maximum 0.28 in compression. As the results of using cement material, it was predicted that the instability problem of the wedge type was better solved. The screw type which could be increased by implanting depth according to the number of assembling mid screws, showed that the decreased tendency of ROMs and maximal cancellous bone stresses. In further study, controlling the number of assembling screws that was suitable for a patient's bone quality, development of surgical tools and keeping on design supplementations, which will be able to develop the competitive artificial disc.