• 제목/요약/키워드: Successive Cancellation

검색결과 156건 처리시간 0.026초

대용량 MIMO 시스템을 위한 하이브리드 송신기 설계 (Hybrid Transmitter Design for Massive MIMO Systems)

  • 서방원
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권3호
    • /
    • pp.49-55
    • /
    • 2022
  • 차세대 이동통신시스템에서 RF 체인의 개수를 증가시키지 않으면서 달성 가능 데이터 전송률을 크게 증가시킬 수 있는 방법은 하이브리드 대용량 MIMO 기법을 사용하는 것이다. 최근에 하이브리드 프리코더에 대한 계산량을 줄이기 위하여 SIC 기반의 설계 방식이 제안되었다. 그러나 기저대역 프리코딩을 위해 단순히 대각 행렬을 사용함으로써 동시에 전송되는 스트림 간에 존재하는 간섭 문제를 해결할 수 없고, 아날로그 프리코딩을 위해서는 1개의 위상변환기를 사용함으로써 데이터 전송률 성능 향상에 한계가 있었다. 이러한 문제점들을 해결하기 위하여, 본 논문에서는 유효 채널에 대한 SVD 기반의 디지털 프리코딩을 적용하고 두 개의 위상 변환기를 사용하는 아날로그 프리코딩 방법을 제안한다. 모의실험을 통하여 제안하는 기법이 기존 기법보다 더 높은 달성 가능 데이터 전송률 성능과 SINR 성능을 갖는다는 것을 보인다.

Feasibility study of the beating cancellation during the satellite vibration test

  • Bettacchioli, Alain
    • Advances in aircraft and spacecraft science
    • /
    • 제5권2호
    • /
    • pp.225-237
    • /
    • 2018
  • The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.

이기종 네트워크를 위한 다중 셀 검출 기법 (Multi-Cell Search Scheme for Heterogeneous Networks)

  • 조용호;고학림;임태호
    • 한국통신학회논문지
    • /
    • 제41권4호
    • /
    • pp.395-403
    • /
    • 2016
  • 본 논문은 이기종 네트워크(heterogeneous networks: HetNet)를 위한 다중 셀 검출 방안을 제안한다. 이기종 네트워크에서 여러 셀을 동시에 검출 시 모든 셀로부터의 채널 정보를 획득하는 것은 어렵기 때문에 채널 정보를 필요로 하지 않는 비동기(non-coherent) 검출 방식이 선호된다. 본 논문에서는 가중치 벡터를 사용하는 비동기 기반 단일 셀 검출 기법을 제안하고, 이를 이용한 순차적 간섭 제거 기반 다중 셀 방안을 고안한다. 셀 검출 능력 향상을 위해 가중치 벡터는 무선 채널이 갖는 일반적 성질을 반영하여 설계되었다. 또한 제안된 단일 셀 검출 방안의 성능이 각 채널 환경별 최적 가중치 벡터 근처에서 둔감하게 변하는 성질을 바탕으로 다양한 채널 환경 및 신호 대 잡음비 영역에서 최적 성능에 근접한 universal 가중치 벡터도 제안되었다. 모의실험 결과 제안된 다중 셀 검출 방안은 향상된 단일 셀 검출 능력을 통해 기존 방식 대비 좀 더 정확히 셀을 검출할 수 있고, 검출된 셀로부터의 신호를 수신 신호에서 제거함으로써 나머지 셀을 효과적으로 검출할 수 있음을 확인하였다.

공간종속성 분석기반 모니터링 장비위치결정 기법 (The Research on Location Monitoring Device using Exploratory Spatial Data Analysis)

  • 김주환;남두희;정점래
    • 한국ITS학회 논문지
    • /
    • 제17권4호
    • /
    • pp.124-137
    • /
    • 2018
  • 본 연구의 핵심은 공간상에 빈번하게 발생하는 범죄의 위험지점(Hotspot)을 찾고, 방범CCTV 적정설치위치를 도출하는 것이 목적이다. 범죄의 특징 중 하나가 과거 발생지역중심으로 군집하는 현상을 보이며 또한 이런 범죄들은 상호연관성이 강하다는 것이다. 범죄이력을 통해 군집이 발생한 원인과 범죄에 영향을 미치는 변수를 찾을 수 있다. 방법은 전통적인 OLS모델 외에 공간적 자기상관성을 포함하는 공간시차모델, 공간오차모델을 적용하여 5대 범죄율과 절도율, 외국인 거주율에 영향을 미치는 변수를 선정하였다. 5대 범죄에 영향을 미치는 변수는 생활보호대상자율과 풍속업소율에는 양(+)의 부호로, 가로등 밀집도에는 음(-)의 부호로 나타나. 생활보호대상자가 군집한 지역, 풍속업소 군집지역, 다문화가정이 많은 지역, 가로등 밀집도가 낮은 지역을 중첩하여 위험공간으로 선정하고, 이를 근거로 기존 CCTV영역이 Hotspot의 46%를 담당하고 있다는 사실을 밝혀냈다. 현재 운영 중인 CCTV를 감안한 상태에서 위험지점을 커버할 신규물량은 총 89대로 나타났다.

항공판례의 연구 -국제항공운송조약의 적용문제를 중심으로- (A Study on the Aviation Case Law -Focusing on the Application of Treaties for the International Carriage by Air-)

  • 김종복
    • 항공우주정책ㆍ법학회지
    • /
    • 제21권1호
    • /
    • pp.29-63
    • /
    • 2006
  • 본 논문은 국제항공운송인의 책임에 관한 조약의 적용문제에 관한 항공판례를 1) 공간적 적용문제, 2) 인적 적용문제, 3) 물적 적용문제, 4) 시간적 적용문제로 크게 4 부분으로 나누어 연구하였다. 첫째, 공간적 적용문제와 관련하여서는 (1) 국제선 구간에서의 적용의 해석에 관한 판례, (2) 조약의 배타적 적용에 관한 판례, (3) 원 조약 체결국과 개정조약 체결국간의 적용문제에 관한 판례를 살펴보았는데 특히 각각 다른 Legal Instrument에 가입하여 문제된 판례는 평석을 곁들였다. 둘째, 인적 적용문제와 관련하여서는 그 적용대상에 따라 (1) 계약운송인, 실제운송인, (2) 순차운송인, (3) 이행보조자, (4) 기타의 경우로 나누어 살펴보았다. 셋째, 물적 적용문제는 적용범위에 중점을 두어 (1) 항공기 승강중의 사고, (2)항공운송중의 사고, (3) 운항취소 및 운송지연의 경우로 나누어 살펴보았다. 넷째, 시간적 적용문제는 조약의 발효일 문제를 중심으로 살펴보았다. 다른 모든 법률분야와 마찬가지로 항공법 분야에서도 판례의 중요성은 아무리 강조해도 지나치다고 할 수 없다. 따라서 비록 본 논문이 방대한 항공판례 중 그 일부를 연구 소개하지만 앞으로 이것이 계기가 되어 우리나라에서도 제대로 된 본격적인 항공판례 연구가 이루어지길 기대한다.

  • PDF

수중 음향 센서 네트워크에서 비직교 다중 접속을 위한 다차원 노드 페어링 기법 (A Multi-Dimensional Node Pairing Scheme for NOMA in Underwater Acoustic Sensor Networks)

  • 천진용;조호신
    • 한국산학기술학회논문지
    • /
    • 제22권6호
    • /
    • pp.1-10
    • /
    • 2021
  • 최근 해양 수중 산업의 발전으로 수중 센서 네트워크(UWASN: Underwater Acoustic Sensor Network)에 대한 관심이 증대되고 있다. 수중 센서 네트워크를 효율적으로 운용하기 위해서는 노드 간 전송 충돌을 방지하고 통신 자원을 효율적으로 공유할 수 있는 매체 접속 제어(MAC: Medium Access Control) 프로토콜을 적용하는 것이 매우 중요하다. 하지만 수중 채널은 지상 무선 통신 환경과 달리 좁은 대역폭, 긴 전파 지연 시간, 낮은 전송률 등의 특성을 가지므로 지상 환경에서 개발된 비직교 다중 접속(NOMA: Non Orthogonal Multiple Access)의 노드 페어링 기법을 그대로 적용할 수 없다. 따라서 본 논문에서는 수중 채널의 특수성을 고려한 수중 음향 센서 네트워크에서의 비직교 다중 접속 다차원 노드 페어링 기법을 제안한다. 기존의 기법들은 노드 페어링 시 채널 품질만을 고려하였다. 기존 기법과 달리 제안 기법에서는 채널 품질 뿐 아니라 노드 간 공평성, 트래픽 부하, 패킷의 나이를 추가로 고려하여 최적의 노드 쌍(node-pair)을 찾는다. 추가적으로, 송신 노드는 실제 경로 손실 대신 노드 쌍 가능 노드 목록(PNL: Pairable Nodes List)을 활용함으로써 노드 페어링 시의 계산 복잡도를 줄인다. 시뮬레이션 결과에 따르면 공평성 요소까지 고려한 제안 기법이 기존 기법 대비 최대 23.8% 전송률 증가, 28% 지연 시간 감소, 공평성은 최대 5.7% 향상됨을 확인할 수 있었다.