• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1475-1480
• /
• 2007

Numerical analysis has been conducted to simulate pedestrian flow in the model of two-storied subway station. Because almost all the subway stations are two or three storied structure, simulations are conducted for the passengers those who get off the train and pass the wicket. Passenger flow analysis is very important factor to design the station and also to manage the operation of subway system. In the subway station, pedestrians move to the horizontal directions as well as vertical ones. Therefore, to consider the movement of pedestrians is necessary for the guarantee of safety and conveniency. As the up and down floors are connected with step, escalator and elevator, the entire movements in the multi-storied station should be simulated as like a 3-dimensional flow. Numerical schemes for the directional sweeping are developed to prevent the dependency on physical structure of station and to determine primary direction and secondary one. By using the developed program, we compared the simulation results of the effects of the location and size of exit and elapsed time.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.103-111
• /
• 2006

To optimize the ventilation and smoke control systems in subway equipped with platform screen door, the technology to analyze the unsteady tunnel flow caused by running of train should be developed. The development of model experiment and numerical analysis technique with relation to unsteady flow of subway were presented. The pressure and air velocity changes in 1/20-scaling experiment unit were measured and results were comparied to those of 3-D unsteady numerical analysis applied with sharp interface method. The experimental and numerical results were quantitatively similar and it would be reasonable to apply sharp interface method to analyze the unsteady flow in subway equipped with platform screen door.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.2
• /
• pp.81-86
• /
• 2008

In this study, numerical simulations were carried out to analyze the effect of the smoke extraction system and fire shutters in subway station fires using FDS 4.0. Subway station used in the experiment was 205 m long. Simulation results are validated by comparing with experimental results. Simulation results showed good agreement with experimental results within $20\;^{\circ}C$. 20 MW polystyrene was used as a fuel in the numerical prediction. Numerical predictions were performed in the side-platform type subway station in case of a train fire. Temperature and CO concentration were lowered by the operation of smoke extraction system.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.51-56
• /
• 2008

Many people transfer from the automobile to the subway because of increasing in oil price and improvement of mass transit system of Seoul Metropolitan City. But Seoul Metropolitan Subway have brought out passengers discomfort because it is more crowded over the appropriateness because of very high utilization though it is highly technically facilitated. This study deals with the development and simulation study of subway train simulator. We analyzed the simulation results considering crowdedness after we defined the concept of crowdedness.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.101-108
• /
• 2014

This study highlights the theme of human error of train drivers, conducting empirical analysis on the relationship between emergency stress, psychological fatigue, safety behavior, and accident. The hypothetical test results based on questionnaires received from 223 train drivers working at A subway firm indicate that emergency stress shows a significant positive effect on psychological fatigue, which in turn shows a significant negative influence on safety behavior. And safety behavior is shown having a significant negative relationship with accident. These results suggest the necessity of corporate-level approaches to depict the drastic causes of drivers' emergency stress, and to effectively manage this stress, as well as the necessity of making effort to enhance safety behavior, and to prevent or reduce accidents.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.71-80
• /
• 2015

During normal subway rush hours, a train-driver is in charge of more than 3,000 people on a daily basis. When an emergency event occurs, millions of people and their property come to depend only on the train-driver's ability. After the Daegu subway fire disaster in February 2003, the Railway Safety Act was enacted in October 2004 and the 'Train Drivers' Licensing System' was introduced by the National Railroad Administration in July 2006 to secure and improve protection. This study was conducted to investigate and evaluate the effects of the Train Drivers' Licensing System since the Licensing System was first introduced eight years ago. In addition, the analysis will suggest better policies for the effectiveness of the 'Train Drivers' Licensing System'.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.364-369
• /
• 2012

This paper presents an experimental study on the radio propagation characteristics in subway tunnel at 18GHz frequency band which has been assigned to video transmission between train and wayside. The radio propagation tests are carried out in the subway tunnel of Seoul Metro using the antenna and communication devices of the prototype video transmission system. The measurement results show that 18GHz radio propagation in subway tunnel has smaller path loss than that of general outdoor radio environment. It is also cleared that the arch-type tunnels have smaller radio propagation losses than rectangular tunnels, and single track tunnels have smaller pass loss than double track tunnels. From the measurements, the radio propagation coverage is worked out as 520 meters. The curved tunnels which cannot have LOS communication between transmitter and receiver have large pass losses and fluctuation profile along distance. The radio propagation coverage along curved tunnels is worked out as 300 meters. These investigation results can be used to design the 18GHz radio transmission system for subway tunnel by providing the optimized wayside transmitter locations and handover algorithm customized to the radio propagation characteristics in subway tunnels.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.204-212
• /
• 2010

Currents which are generated at both ends of drive motor by operating brake pedal when subway train is driving, will generate the reviltalization actual effect if they are not used immediately. So there exist rolling stock established Dynamic braking annex for the purpose of stable brake performance in case there are no retrogress train around or no stable wiring voltage.Therefore 55% of entered energy are consumed in subway train. 45% are used in down gradient section or for regeneration energy and among them 25% are used for another train's retrogression through the wiring. So to reduce reviltalization method keeping the existing system, substation's service voltage should be declined about 5%. And then it will ease off excessive wiring voltage rise. And there need energy reduction by flexible service voltage adjustment and study for energy consumption efficiency in the subway.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.3
• /
• pp.205-213
• /
• 2015

The objective of the current study was to assess the comparative risk associated with exposure to particulate matter (PM) while commuting via different public transport modes in Fukuoka, Japan. For the given routes and measuring days, a trip-maker carried a lightweight portable bag loaded the real-time measurement devices which take simultaneous measurement for size-fractioned particle number concentration, $PM_{2.5}$ mass concentration, and total suspended particle (TSP) collection. The results of the present study have shown significant differences between public transports as commuting modes in Fukuoka. The PM exposure levels on subway platform and inside subway train were overwhelmingly higher than those of other points on commuting route. The relative ratio between modes (i.e., the ratio of $PM_{2.5}$ inside subway to that inside bus) provides an idea for choosing a right commuting mode for our health. This study clearly provided evidence of the extremely high levels of iron exposure by subway uses compared to bus uses. The result of theoretically reconstructed mass concentration of $PM_{2.0-0.3}$ collected on subway platform suggests that the PM of underground subway will be associated with PM both generated in subway system and inleakaged from outdoor environment.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.4
• /
• pp.184-191
• /
• 2014

Air quality in a subway tunnel has been crucial in most of the subway environments where IAQ could be affected by many factors such as the number of passengers, the amount and types of ventilation, train operation factors and other facilities. A modeling approach has been introduced to manage the general IAQ in a subway station. Field surveys and $CO_2$ measurements were initially conducted to analyze and understand the relationship between indoor and outdoor air quality while considering internal pollution sources, such as passengers and subway trains, etc. The measurement data were then employed for the model development with other statistical information. For the model development, the algorithm of simple continuity was set up and applied to model the subway IAQ concerned, while considering the major air transport through staircases and tunnels. Monitored $CO_2$ concentration on the concourse and platform were correlated with modeling results where the correlation values for the concourse and platform were $R^2=0.96$ and $R^2=0.75$, respectively. It implies that the box modeling approach introduced in this study would be beneficial to predict and control the indoor air quality in subway environments.