• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.797-800
• /
• 2011

우주발사체에 있어서 추진기관 시스템은 가장 중요한 구성 요소이다. 액체 추진기관을 새로 개발한다고 할 때, 그 개발 수준을 평가하기 위해서는 적절한 시험 설비에서 수행되는 시스템 종합시험이 반드시 필요하다. 본 논문에서는 새로운 추진기관 시스템의 개발 인증을 위해 개발 단계별로 요구되는 시험의 종류와 반드시 확인해야 할 변수들을 검토 정리하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.155-157
• /
• 2005

The Electrical Test Bed(ETB) integrates the test environment, required for acceptance tests of system level, prior to FM testing. The ETB will be used for the validation of system-level functions and interface between each subsystem. The FTB supports early functional and limited performance checkout of electrical subsystems. Therefore, it provides the environment for the verification of the Flight Software including AOCS, EPS, and TC&R simulators. These ETB will be composed of engineering version of spacecraft BUS, which are laid on the laboratory table.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.107-115
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity of container terminal, we composed a model of container logistics system which has a 4 subsystems ; cargo handling, transportation, storage system and Gate complex system. Several date used in simulation gained through spot research and basic statistic analysis using raw data from January to Jane in 1998. The results of this study are as follows ; First, average available ratio of each subsystem was G/C 50%, Y/T 57.5%, storage system 56%, Gate complex 50%, and there was no subsystem occurring specific bottleneck. Second, comparing the results of simulation to the results of basic statistics, we can verify suitability of this simulation model. Third, Comparing the results of this study to the results of existed study, we were able to confirm a change of BCTOC container logistics system under IMF situation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.138-142
• /
• 1998

This paper has been analyzed, modeled, designed, fabricated, and tested for solar cell simulator which has solar array characteristics. The main purpose is the development of solar cell simulator to test electrical power subsystem for GEO Communication Spacecraft. The maximum power of the simulator is about 5 ㎾, which is consist of 12 independent simulator modules with 420 W power rating. The 12 simulator modules are independently controlled like as real solar array system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.389-392
• /
• 2000

Electronics and Telecommunications Research Institute (ETRI) developed the Ka-band satellite communications payload. This system is able to provide a high data rate communication service with a bandwidth of 200 MHz, a wideband digital flunking services up to 155 Mbps and asymmetrical internet multimedia service. The system employs the common receive/transmit antenna and the 2-for-1 redundant scheme for the LNA-Downconverters. The different types of high power amplification, TWTA for one chain and SSPA for the other chain, are used lot the variety of experimental options. For the reliable test of the payload, EGSE was also developed. The parametric RF tests were carried out in order to measure the performance of Ka-band communication subsystem, in most case the results of RF performance test complied the payload requirement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.235-238
• /
• 2002

In this paper we describe the design and implementation of Electrical Ground Support Equipment(EGSE) for the CBS transponder testing. The main task of EGSE is to check out satellite systems, at system or subsystem level, during integration and validation phases of their life-cycle. Through a combination of hardware and software elements, EGSE supports manual, semi-automatic and fully automated testing. Automation is achieved by offering users simple, yet powerful means to write their own test application programs (test sequences) in high-level, test-oriented language and to run them in a strict real-time environment. The core of this environment is a user-configurable real-time database, containing all the information needed to calibrate acquired data, check them against predefined thresholds, automatically react to out-of-range conditions, display data using animated graphics or synoptic windows, and so on.

• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.105-116
• /
• 2004

초소형위성의 설계는 무게, 체적, 전력 및 표면적 등의 제한조건으로 인하여 상당한 어려움이 따른다. 임무기간 동안 위성의 각 모듈에 전력을 지속적으로 공급해 줄 수 있는 효율적인 저가의 피코위성 HAUSAT-1 전력시스템을 개발하였다. 본 논문에서는 태양전지판, 배터리, 전력조절 및 분배유닛의 설계 및 해석 결과를 논의하였으며, 설계된 시스템의 개발이 실제 하드웨어로 구현이 가능하도록 개발비용과 성능을 고려한 부품의 선정, 제작 및 시험결과에 대하여 기술하였다. 또한 운영 모드별 에너지 평형 해석 (Energy Balance Analysis) 을 통한 시뮬레이션 수행 결과를 보여주고, 전력계의 가능 및 환경시험 결과와의 비교를 통하여 전력시스템 설계의 타당성을 검증하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.509-511
• /
• 2005

KOMPSAT -2 equipped with an optical telescope(MSC) will be launched in this year. It can take images of the earth with push-broom scanning at altitude 685Km. Its resolution is 1m in panchromatic channel with a swath width of 15 km After the MSC is tested and the performance is measured at instrument level, it is installed on satellite. The image passes through the electro-optical system, compression and storage unit and fmally downlink sub-systems. This integration procedure necessitates the functional test of all subsystems participating in the image chain. The objective of functional test at satellite level(Quick Look test) is to check the functionality of image chain by real target image. Collimated moving image is input to the EOS in order to simulate the operational environments as if KOMPSAT -2 is being operated in orbit. The image chain from EOS to data downlink subsystem will be verified through Quick Look test. This paper explains the Quick Look test of KOMPSAT -2 and compares the taken images with collimated input ones.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.251-269
• /
• 2020

Euclid is an optical/near-infrared survey mission of the European Space Agency (ESA) to investigate the nature of dark energy, dark matter and gravity by observing the geometry of the Universe and the formation of structures over cosmological timescales. The Euclid spacecraft mechanical architecture comprises the Payload Module (PLM) and the Service Module (SVM) connected by an interface structure designed to maximize thermal and mechanical decoupling. This paper shortly illustrates the mechanical system of the spacecraft and the mechanical verification philosophy which is based on the Structural and Thermal Model (STM), built at flight standard for structure and thermal qualification and the Proto Flight Model (PFM), used to complete the qualification programme. It will be submitted to a proto-flight test approach and it will be suitable for launch and flight operations. Within the overall verification approach crucial mechanical tests have been successfully performed (2018) on the SVM platform and on the sunshield (SSH) subsystem: the SVM platform static test, the SSH structure modal survey test and the SSH sine vibration qualification test. The paper reports the objectives and the main results of these tests.

• 한국경영과학회지
• /
• 제16권2호
• /
• pp.148-158
• /
• 1991

The Built-In-Test (BIT) system is an integrated subsystem for the determination of the health status of any primary system. The BIT consists of hardware and software installations directed at performance of the functions of fault detection, diagnosis and isolation, as well as primary system record failure information. Evaluation of the difinitions appropriate to the BIT system, including system characteristics and parameters, is important to an understanding of system functions. The object of this paper is to present general definitions of the BIT diagnosis parameters and a semiquantiative evaluation method for BIT systems. Finally, two case studies for actual problem solutions are included.