• 한국운동역학회지
• /
• 제25권4호
• /
• pp.383-391
• /
• 2015

Objective : The purpose of this study was to investigate the effects of dynamic squats with slope-whole body vibration (WBV) on the trunk and lower limb in muscle activities. Method : 9 healthy women (age: $21.1{\pm}0.6years$, height: $160.5{\pm}1.4cm$, body weight: $50.5{\pm}2.4kg$) were recruited for this study. Muscle activities in the trunk and lower limb muscles, including biceps femoris (BF), rectus femoris (RF), rectus abdominum (RA), gastrocnemius (GCM), iliocostalis lumborum (IL) and tibialis anterior (TA), were recorded using an EMG measurement system. The test was performed by conducting dynamic squats with slope-WBV using frequency (10Hz, 50Hz), amplitude (0.5mm), and degree ($0^{\circ}$, $5^{\circ}$). Experimental method consisted of 2-pre-sessions and 1-test-session for 20 seconds. Results : The results showed that the muscle activities of the trunk and low limb muscles increased significantly with the $5^{\circ}$ slope and lower frequency (10Hz) except for in the TA. From this result, we confirmed that the slope and WBV could efficiently affect stimulation, enhancing muscle activities by facilitating neural control trail and muscle chain tightness. Conclusion : Utilizing the slope-WBV device while squatting could give positive effects on muscle activation in the trunk and lower limb muscles and provide neural stimulation, enhancing muscle chain of control subsystem through TVR (tonic vibration reflex).

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.541-546
• /
• 2015

Global energy shortage problem is expected to increase driven by strong energy demand growth from developing countries. Nuclear fusion power offers the prospect of an almost infinite source of energy for future generations. Hydrogen isotope storage and delivery system is a important subsystem of a nuclear fusion fuel cycle. Metal hydride is a method of the high-density storage of hydrogen isotope. For the safety storage of hydrogen isotope, depleted uranium (DU) has been widely proposed. But DU needs a safe test because It is a radioactive substance. The authors studied a small-scale DU bed and a medium-scale DU bed for the safety test. And then we made a large-scale DU bed and stored hydrogen isotopes in the bed. Before the hydriding/dehydriding, we tested it's heating and cooling properties and carried out an activation procedure. As a result, Reaction rate of DU-$H_2$ is more rapid than the other metal hydride ZrCo. Through the successful storage result of our large bed, the development possibility of the hydrogen isotope storage technology seems promising.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.23.1-23.1
• /
• 2011

The SMT is a subsystem of the UFFO (Ultra-Fast Flash Observatory) pathfinder onboard the Lomonosov spacecraft planed to be launched in November 2011. The UFFO is designed for extremely fast observation of optical afterglow of Gamma Ray Burst (GRB). This study is primarily concerned with performance measurement of the SMT optical system under the integration and test phase. SMT is a 100mm Ritchey-Chretien type telescope with a motorized slewing mirror and a $256{\times}256$ pixels Intensified Charge-Coupled Device (ICCD) of 22.2${\mu}m$ in pixel size. SMT is designed to operate over the wavelength coverage between 200 nm and 650 nm. It has 17 arcmin FOV (Field of View), providing 4arcsec in detector pixel resolution. In this study, we describe the integration and test process of the SMT optical system and interim performance measurement results with motorized slewing mirror and ICCD.

• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.172-178
• /
• 2015

제어 모멘트 자이로(control moment gyroscope, CMG)는 고토크 발생 장치로서 인공위성 뿐만 아니라 항공, 선박, 자동차, 로봇 등의 다양한 산업분야의 자세안정화와 기동 시스템에 적용될 수 있다. 본 논문은 여러 산업분야에서 적용할 수 있는 100Nm급 CMG 개발 전반에 대한 내용을 다룬다. 이를 위해서 CMG 시스템레벨 요구사항 분석, 모터 서브시스템 설계/제작/조립, 시험장치 구성, 성능시험 및 평가에 대한 개발과정과 결과를 제시한다. 스핀모터와 김벌모터를 설계조건에서 구동하여 CMG의 토크출력이 120Nm 이상 생성됨을 성능시험을 통해 확인한다.

• 한국위성정보통신학회논문지
• /
• 제8권2호
• /
• pp.80-87
• /
• 2013

통신, 해양, 기상의 세 분야 복합 임무를 수행하는 천리안위성(Communication Ocean Meteorological Satellite: COMS)은 정지궤도 동경 $128.2{\circ}$에서 2011년 4월부터 현재 정상 운영 임무를 수행하고 있다. 세 임무를 수행하기 위해 천리안위성에는 3가지 탑재체인 기상탑재체(Meteorological Imager: MI), 해양탑재체(Geostationary Ocean Color Imager: GOCI), 통신탑재체(Ka-band communication payload)가 실려 있다. 세 가지 임무 운영과 위성 유지 관리를 위해 위성 관제가 실시간 운영으로 수행된다. 위성 실시간 운영은 명령과 원격측정자료를 통해 위성과 직접 통신하는 업무이다. 본 논문에서는 천리안위성의 실시간 운영 특성으로 지상국 장비 구성과 일일, 주간, 월간, 계절별, 연간 운영 업무 특성을 논하였다. 천리안위성의 궤도상 시험(In-Orbit-Test: IOT) 말기와 정상 운영 첫 해가 포함되는 2011년의 1년간 운영 결과에 대한 토의를 통해 성공적인 실시간 운영 결과 확인도 제시하였다.

• 천문학회보
• /
• 제40권1호
• /
• pp.56.3-57
• /
• 2015

As of early 2015, more than 12,000 Near-Earth Objects (NEOs) have been catalogued by the Minor Planet Center, however their observational properties such as broadband colors and rotational periods are known only for a small fraction of the population. Thanks to time series observations with the KMTNet, orbits, optical sizes (and albedo), spin states and three dimensional shapes of asteroids and comets including NEOs will be systematically investigated and archived for the first time. Based on SDSS and BVRI colors, their approximate surface mineralogy will also be characterized. This so-called DEEP-South (Deep Ecliptic Patrol of the Southern Sky) project will provide a prompt solution to the demand from the scientific community to bridge the gaps in global sky coverage with a coordinated use of the network of ground-based telescopes in the southern hemisphere. We will soon finish implementing dedicated software subsystem consisted of automated observation scheduler and data pipeline for the sake of increased discovery rate, rapid follow-up, timely phase coverage, and efficient data analysis. We will give a brief introduction to test runs conducted at CTIO with the first KMTNet telescope in February and March 2015 and experimental data processing. Preliminary scientific results will also be presented.

• Journal of Astronomy and Space Sciences
• /
• 제30권3호
• /
• pp.193-206
• /
• 2013

The detector subsystem of the Optical Wide-field Patrol (OWL) network efficiently acquires the position and time information of moving objects such as artificial satellites through its chopper system, which consists of 4 blades in front of the CCD camera. Using this system, it is possible to get more position data with the same exposure time by changing the streaks of the moving objects into many pieces with the fast rotating blades during sidereal tracking. At the same time, the time data from the rotating chopper can be acquired by the time tagger connected to the photo diode. To analyze the orbits of the targets detected in the image data of such a system, a sequential procedure of determining the positions of separated streak lines was developed that involved calculating the World Coordinate System (WCS) solution to transform the positions into equatorial coordinate systems, and finally combining the time log records from the time tagger with the transformed position data. We introduce this procedure and the preliminary results of the application of this procedure to the test observation images.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• 생물정신의학
• /
• 제16권4호
• /
• pp.238-245
• /
• 2009

Objectives : Mild Alzheimer's disease(AD) is uncertain to be related to visuospatial working memory subsystem dysfunction. We used the self ordered pointing test(SOPT) to find the characteristics of visuospatial working memory in mild AD. Methods : We compared the visuospatial working memory abilities of 20 patients with mild AD and 20 normal elderly controls(NC) using SOPT, of which stimuli consisted of two stimuli types(A : abstract, C : concrete) and two stimuli numbers(8 and 12). Therefore, working memory was tested using C8, C12, A8, and A12 stimuli conditions in SOPT. Mixed-model ANOVA was conducted with the AD and NC groups as between-subjects factor, with stimuli types and stimuli numbers as the within-subjects factors and with SOPT error rates as the dependent variable. Results : The AD group showed higher error rates in SOPT than the NC group. The NC group showed low error rates in concrete stimuli than in abstract stimuli and in small stimuli numbers than in large stimuli numbers. And the AD group showed no differences between stimuli types or stimuli numbers. Conclusion : AD patients showed a poor performance in visuospatial working memory using concrete stimuli. The result suggests that there is a non-transformation from visual input to phonological working memory in AD. Patients with AD showed a poor performance although in small stimuli number condition of SOPT. It suggests that in AD, visuospatial working memory is not working well although in low central executive loads.