• 대한지하수환경학회지
• /
• 제3권2호
• /
• pp.95-100
• /
• 1996

난지도 매립장의 매립물 특성과 지하구조를 파악하기 위해서 난지도 매립장 상부에서 슐럼버져 전기비저항 탐사와 동일송수신기 배열 시간영역 전자탐사를 실시하였다. 또한 6개의 측점에서는 두가지 탐사를 함께 실시하여 지하구조 해석 결과의 신뢰도를 높이고자 하였다. 전기탐사와 시간영역 전자탐사로부터 구한 지하구조 모델은 서로 상당히 일치하는 양상을 보인다. 매립장의 전기비저항 구조는 천부에 높은 전기 비저항을 보이는 표층 아래에 낮은 비저항층이 존재하며, 저비저항층 하부에 다시 고비저항층이 존재하는 양상을 보인다. 중간층의 저비저항은 매립물의 분해와 강수의 유입에 의해 생성된 것으로 보이며, 하부의 고비저항층은 난지도 지역의 기반암을 나타내는 것으로 보인다. 이상의 결과는 매립장 및 주변지역에서 실시된 슐럼버져 전기탐사 및 쌍극자배열 전기탐사의 결과와도 잘 대비된다. 매립장의 저비저항층이 기반암이 존재하는 것으로 생각되는 깊이까지 발달하고 있고, 난지도 지역에 오염물질의 수직이동을 막을 수 있는 불투수성 지층이 존재하지 않는 점을 고려할 때, 매립장에서 생성된 오염물질은 난지도 매립장 지하의 지하수로 바로 유입되는 것으로 보인다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2001년도 정기총회 및 제3회 특별지포지움
• /
• pp.94-103
• /
• 2001

유기 석유화학 오염 물질인 휘발유가 지하 분포 시, 지하수면 위 토양 매질(vadose zone)내에 존재할 수 있는 기체 상태(vaporphase)와, 지하수면의 상승 또는 하강에 의해 분포 할 수 있는 residual phase의 유류 오염 물질이 GPR에 미치는 반응을 조사하기 위하여 모래와 자갈을 토양 매질로서 채운 탱크를 이용한 모델 실험이 수행되었다. 물만 사용하여 지하수면의 상승과 하강을 유도한 후, 석유 수송을 위하여 지하에 매장된 파이프 혹은 석유저장을 위한 지하 탱크로부터 지하수면으로의 유류 오염을 simulation하기 위하여 모델 탱크바닥을 통하여 휘발유가 주입되었다. 본 연구 결과, 수분 함량에 따른 GPR의 민감성과 지하수면의 변화 관측에의 GPR 효율성이 입증되었다. 또한, 휘발성 유류 오염 물질의 기체상태가 vadose zone에 분포 시 GPR를 이용하여 탐지할 수 있는 가능성과, 지하수면의 상승에 의해 지하수면 밑의 물로 포화된 토양(water saturated zone)에 분포할 수 있는 residual phase의 유류 오염 물질의 탐지 가능성이 모델 실험을 통하여 확립되었다 그리고, residual phase의 유류 오염 물질이 지하수면 아래에 분포하는 오염지역에서 GPR을 이용한 유류 오염물질을 탐지할 수 있는 새로운 탐사전략이 제시되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.114-116
• /
• 2005

Natural attenuation has been actively studied and often selected as final clean-up process in remediation of contaminated ground-water and soil for the last decade. Accordingly, understanding of natural processes affecting the fate and transport of contaminants in the subsurface becomes important for a success of implementation of the natural remediation strategy, Contaminant advection and diffusion processes in the unsaturated zone are naturally related to environmental changes in the atmosphere. The atmospheric pressure changes affecting the transport of contaminants in the subsurface are investigated in this study. Moisture content, trichloroethylene (TCE) concentration, temperature, and pressure variations in the subsurface were measured for the July, August, November, and December 2001 at Picatinny Arsenal, New Jersey. These data were used for a one-phase flow and one-component transport model in simulating the soil-gas flow and accordingly the TCE transport in the subsurface in accordance with the atmosphere pressure variations at the surface. The soil-gas velocities during the sampling periods varied with a magnitude of $10^{-6}\;to\;10^{-7}\;m\;s^{-1}$ at land surface. The TCE advection fluxes at land surface were several orders of magnitude smaller than the TCE diffusion fluxes. A sensitivy analysis indicated that advection fluxes were more sensitive to changes in geo-environmental conditions compared to diffusion fluxes. Of all the parameters investigated in this study, moisture content has the most significant effect on TCE advection and diffusion fluxes.

• 한국농공학회논문집
• /
• 제64권3호
• /
• pp.53-61
• /
• 2022

This study evaluated the impacts of subsurface drainage design, i.e., spacing and depth, on agricultural productivity and environmental sustainability in two tile-drained fields (Sites A and E) under a corn-soybean rotation in the Midwestern United States. A calibrated and validated Root Zone Water Quality Model (RZWQM) was used to simulate Nitrate-N (nitrogen) losses to tile drainage and crop yields of 30 tile spacing and depth scenarios over 24 years (1992-2015). Our results presented that the narrower and deeper the tile drains are placed, the greater corn yield and Nitrate-N losses, indicating that the subsurface drainage design may cause a trade-off between agricultural productivity and environmental sustainability. The simulation results also presented that up to about 255.7% and 628.0% increase in Nitrate-N losses in Sites A and E, respectively, far outweigh the rate of increase in corn yield up to about 1.1% and 1.6% from the adjustment of tile spacing and depth. Meanwhile, the crop yield and Nitrate-N losses according to the tile configuration differed depending on the field, and the soybean yield presented inconsistent simulation results, unlike the corn yield, which together demonstrate the heterogeneous characteristic of agro-environmental systems to a subsurface drainage practice. This study demonstrates the applicability of agricultural systems models in exploring agro-environmental responses to subsurface drainage practices, which can help guide the introduction and installation of tile systems into farmlands, e.g., orchards and paddy fields, in our country.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.126-132
• /
• 2013

It was investigated that the effects of hydrogen charging on the properties of 590 MPa Dual Phase(DP) steels at the surface layers. The hydrogen-charging time was changed from 5 to 50 hours and current densities from 100, 150, and 200 $mA/cm^2$, respectively. It was found that the hydrogen content in the specimen was increased with as the charging time and the current density. The microvickers hardness of the subsurface zone was increased from 215.3 HV to 239.5 HV due to the increase in current density and charging time. The comparison of the absorbed energies tested by a small-punch (SP) test showed that the absorbed energy of the specimen was greatly reduced from 436 to 283 $kgf-mm^2$ because of hydrogen embrittlement. It was confirmed that bulb aspects of fracture surface became more brittle with increasing hydrogen content.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.581-585
• /
• 2010

High strength sheet steels for automobile are seriously compromised by hydrogen embrittlement. This issue has been continuously studied, but the field of interest, which lies between microstructural characteristics and hydrogen behavior with hydrogen charging, has not yet been thoroughly investigated. This study was done to investigate the behavior of hydrogen according to the hydrogen volume fraction on 590MPa grade DP steels, which are developed under hydrogen charging conditions as high strength sheet steels for automobiles. The penetration depths and the mechanical properties, according to charging conditions, were investigated through the distribution of micro-hardness and the microstructural observation of the subsurface zone. It was found that the amount of hydrogen trapping in 590MPa DP steels was related to the austenite volume fraction. It was confirmed that the distribution of micro-hardnesses according to the depth of the subsurface zone under the free surface showed the relationship of the depth of the hydrogen saturation between the charging conditions.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.61-65
• /
• 2005

The titanium $diboride(TiB_2)$ has high strength(750MPa), high melting point $(3225^{\circ}C)\;and\;10\%$ IACS electrical conductivity. On this account, the dispersion hardening $Cu-TiB_2$ composites(MMCs) are a promising candidate for applications as electrical contact materials. MMCs for electrical contact materials can reduce material cost and resource consumption caused by wear, due to its good mechanical and electrical property. In this study, we attempt to prepare MMCs with various volume fraction and particle size of $TiB_2$ by means of hot extruded and cold drawn process. Dry sliding wear tests were performed on a pin-on-disk type wear tester, sliding against SM45C under the different applied loads. After wear testing, the microstructures of the worn surfaces were observed by SEM and the microhardnesses of the subsurface zone were measured.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.511-525
• /
• 2024

Underground openings significantly affect the mechanical stability of underground spaces and create damaged zones. This study investigated the acoustic emission (AE) characteristics associated with the formation of damaged zones around circular openings. Uniaxial compression experiments were conducted on three types of rock specimens, namely, granite (GN-1 and GN-2), gabbro (GB), and slate (SL), containing a circular opening. AE and digital image correlation (DIC) techniques were used to monitor and evaluate the damaged zones near the circular openings. The AE characteristics were evaluated using AE parameters, including count, energy, amplitude, average frequency, and RA value. The DIC results revealed that the estimated diameters of the damaged zones of GN-1, GN-2, GB, and SL were 1.66D, 1.53D, 1.49D, and 1.9D, respectively. The average displacements at the surface of the damaged zones for these specimens were 0.814, 0.786, 0.661, and 0.673 mm, respectively, thus demonstrating a strong correlation with Young's modulus. The AE analysis with DIC revealed that tensile failure occurred in the direction parallel to the maximum compression axis as the load increased. Thus, this study provides fundamental data for a comprehensive analysis of damaged zones in underground openings and will facilitate the optimization of rock engineering projects and safety assessments thereof.

• 지질공학
• /
• 제8권3호
• /
• pp.285-296
• /
• 1998

옥천대의 심부 지질구조를 규명하기 위한 연구의 일환으로 옥천대 서남단의 주요 구조선과 대체로 직교 하는 70km의 측선을 따라 중력과 자력탐사를 수행하였다. 또한 측선을 포함하는 옥천대 서남부에 대한 최근의 암석학적 및 지화학적 연구성과를 요약하였다. 중력과 자력 측정치들을 보정하여 각각 부게이상과 총자기이상을 구했다. 중력과 자력이상은 옥천대 남쪽 경계인 장흥부근에서 급격히 변화한다. 이러한 부게이상의 급격한 증가는 선 캠브리아 편마암류와 상대적으로 밀도가 큰 중성 심성암류와의 사이에 상당히 큰 변위를 가진 심부의 정단층으로 설명이 가능하다. 이 단층은 옥천대의 형성과 진화에 중요한 역할을 한 단층으로 사료된다. 한편 중력이상과 자력이상의 근원이 같다는 가정아래 중력이상으로부터 가상의 자력이상을 계산하였다. 계산된 자력이상은 측선상의 50km 부근(장흥근처)까지는 대체로 중력이상과 일치하나, 그 이후에는 완전히 반대의 상관을 보여준다. 끝으로 잔여 부게이상을 만족하는 지하구조가 시행착오적인 순해법에 의하여 제시되었다. 여기서 초기모델은 지표지질과 역해법의 결과로부터 주어졌다.

• Korean Journal of Hydrosciences
• /
• 제2권
• /
• pp.13-24
• /
• 1991

The governing partial differential equation of flow in porous media is developed on the bases of the continuity equation of fluid for transient flow through a saturated-unsaturated zone, and substitution of Dercy's law. The numerical solution is obtained by the Galerkin finite element method based on the principle of weighted residuals. The analysis is carried out by using the unsteady storm data observed and the functional relationships between the hydraulic conductivities, capillary pressure heads, and volumetric water contents under saturated-unsaturated conditions. As the results the hydraulic conductivities, rates of change of storage and initial moisture conditions are significantly influened on the responses of subsurface flow on a hillslope.