• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.248-254
• /
• 2012

During the monolayer assembly of zeolite microcrystals using sonication with stacking (SS) method, the factors that govern the degree of close packing (DCP) between the microcrystals, the rate of attachment (rA) of microcrystals onto the substrate, the degree of coverage (DOC), and the binding strength (BS) between each crystal and the substrate were investigated for each mode of binding linkage (MBL). The tested MBLs were covalent linkage (CL), ionic linkage (IL), and polyelectrolyte-mediated ionic linkage (p-IL). Unlike the monolayers of zeolite crystals assembled on glass with a covalent linkage, the strong BS, very high DOC, and very high DCP do not decrease during monolayer assembly on glass through ionic linkages. This results indicate that the surface migration of crystals undergo linkage-nondestructively when crystals were attached to the substrates through ionic linkages.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.490-496
• /
• 1999

The sintering behavior of LTCC (low temperature cofired ceramics) chip couplers was investigated in relation with Ag diffusion at the interface of glass ceramic substrate-Ag electrode. Sintering temperature was in the range of 825$^{\circ}C$-975$^{\circ}C$. The commercial green sheet and silver electrode were used. Below 875$^{\circ}C$ the diffusion of the Ag ion into the substrate and the penetration of glassy phases into the electrode occurred due to an increase of fluidity. Thus the lectrode line was severely deformed and damaged. At 975$^{\circ}C$ the transformation of crystalline phases into glassy phases and the melting of the Ag electrode resulted in the diffusion of the considerable amount of Ag ions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.403-404
• /
• 2008

In this study, we prepared ITO thin film on glass, polycarbonate (PC) and polyethersulfone (PES) substrate in Facing Targets sputtering (FTS) system. Properties of as-deposited thin films's aging change were investigated as a function of time placed in the air. The electrical and optical properties of as-deposited thin films were employed by a four point probe and an UV/VIS spectrometer, an X-ray diffractometer (XRD), a Field Emission Scanning Electron Microscope(FESEM) and a Hall Effect measurement. As a result, as time went by, transmittance of all films did not change but resistivity of films was decreasing.

• Journal of Information Display
• /
• 제4권3호
• /
• pp.12-16
• /
• 2003

In connection with the ion exchange strengthening on soda-lime-silicate, substrate glass for display use was investigated. In the processing, the temperature was varied during the ion exchange in order to make stress profile and to determine optimum condition. In the present work, we found that the maximum value of strength was 617.8 MPa after an ion exchange process at 470 $^{\circ}C$ for 1h, and then, at 450 $^{\circ}C$ for 24h. Also, the effect of residual stress placed on the near surface was measured by analyzing the number of crack branches and brittleness. This approach allowed us the residual stress profile to be engineered to improve mechanical reliability.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.635-639
• /
• 2000

In this paper, a new idea about ultra-clean aligning and mounting method of FED spacers was introduced. The glass-to -glass electrostatic bonding process was employed in order to bond the micro-structures of spacers to black matrix area formed on an FED anode substrate. It is possible to get adhesive-free bonding interface and well-aligned spacer array on an FED anode substrate with a ${\pm}5{\mu}m$ accuracy. Finally, I inch-sized FED panel was demonstrated to make sure of its applicability to FED panel fabrication.

• Journal of information and communication convergence engineering
• /
• 제1권1호
• /
• pp.23-26
• /
• 2003

A photodiode capable of obtaining a sufficient photo/dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as a schottky barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. Growth of high quality alumina($Al_{2}O_{3}$) film using anodizing technology is proposed and analyzed by experiment. We have obtained the film with a superior characteristics

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.647-651
• /
• 2004

We fabricated the 1-inch diode type flat lamp using CNTs, which were grown directly on soda-lime glass substrate at 600 ∼ 650 $^{\circ}C$ by thermal chemical vapor deposition(CVD) of acetylene gas. Turn- on field was about 2.8 V/${\mu}{\textrm}{m}$. We observed that uniform and high brightness had been obtained. The brightness of CNT flat lamp was measured up to about 14 kcd/$m^2$ at 2000V in spacing of 500 ${\mu}{\textrm}{m}$. The results showed that the CNTs were very good emission source and suitable for application in the lamp.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.487-488
• /
• 2005

We have investigated the Electro-Optical Characteristics for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.23-27
• /
• 2010

We prepared Al doped ZnO thin film as a top electrode on a glass substrate with a deposited $Alq_3$ for the top emission organic Light emitting device (TEOLED) with facing target sputtering (FTS) method and radio-frequency (RF) sputtering method, respectively. Before the deposition of AZO thin film, we evaporated the $Alq_3$ on glass substrate by thermal evaporation. And we evaluated the damage of organic layer. As a result, PL intensity of $Alq_3$ on grown by FTS method showed higher than that of grown by RF sputtering method, so we found that the FTS showed the lower damage sputtering than RF sputtering. Therefore, we can expect the FTS method is promising the low-damage sputtering system that can be used as a direct sputtering on the organic layer.

• 폴리머
• /
• 제39권1호
• /
• pp.174-179
• /
• 2015

고분자 배향막이 없는 순수 유리 기판을 이용하여 광반응성 액정의 배향을 유도하였다. 유리 기판을 러빙하여 액정 배향을 유도한 경우, 고분자 배향막을 사용하여 유도한 경우와 같이 액정을 러빙 방향과 평행하게 배향할 수 있는 것을 편광 FTIR, 편광현미경, 복굴절 측정 등의 실험을 통해서 알 수 있었다. 순수 유리 기판을 러빙하여 액정 배향을 유도하는 메커니즘은 러빙 과정에서 유리 표면에 묻어나온 고분자들이 러빙 방향으로 늘어서 분자간 상호작용을 통하여 액정 분자들의 배향을 유도하는 것이다.