• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.233-238
• /
• 2002

In this paper, the characteristics of fresh and hardened recycled concrete were experimentally compared to investigate the applicability of the recycled fine aggregates with the substitution ratio. Test results show that the workability of the recycled concrete decreases with the increment of substitution ratio of the recycled fine aggregates except for type-D case which has a lower absorption ratio. Also air content was increased with increasing substitution ratio. It was found that the compressive strength and elastic modulus of recycled concrete were decreased with increasing substitution ratio of the recycled fine aggregates. And, the superplasticizer was more effective on the workability recovery of the recycled concrete.

• Journal of Applied Biological Chemistry
• /
• 제62권3호
• /
• pp.299-304
• /
• 2019

본 연구에서는 주박을 발효식품에 이용하기 위하여 요구르트 제조의 주원료인 탈지분유를 주박 효소 당화물로 대체(10, 20, 30, 50%)한 실험군과 탈지분유만을 사용한 대조군을 상업용 Bifidobacterium longum, Lactobacillus acidophilus, Streptococcus thermophilus 혼합 균주로 요구르트 발효를 실시하면서 발효특성을 비교하고, 발효 후 요구르트의 관능특성과 저장성을 조사하였다. 요구르트의 pH는 배양시간에 따라 급격히 감소하여 발효 12시간 후 대조군은 4.30, 주박 효소 당화물 첨가군은 3.96~4.16으로 주박 효소 당화물의 사용량에 비례하여 감소하였다. 적정산도는 pH와 유사하게 증가하였으나 발효 12시간 후 대조군은 0.93%, 주박 효소 당화물 첨가군은 0.84~1.04%로 탈지분유의 대체율이 낮은 조건(10~20%)에서는 대조군보다 산의 생성이 증가되었지만 탈지분유의 30% 이상을 대체하면 산의 생성이 감소하였다. 젖산균 생균수는 발효 9시간까지 급격하게 증가하여 대조군과 주박 효소 당화물 첨가군 모두 8.18~8.24 log CFU/g를 나타내었으나 발효 18시간 후 탈지분유의 30~50%이 대체된 요구르트의 생균수는 7.54~7.69 log CFU/g로 감소하였다. 관능평가 결과 맛과 전체적인 기호도 항목에서 탈지분유의 10~20%를 주박 효소 당화물로 대체하여 제조한 요구르트가 대조군과 유의적인 차이가 없었다. 탈지분유의 일부를 주박 효소 당화물로 대체한 요구르트를 $4^{\circ}C$에서 14일간 저장하는 동안 pH와 적정산도의 변화는 미미하였다. 그러나 젖산균 생균수는 주박 효소 당화물의 사용량에 비례하여 감소하였고, 탈지분유의 10~20%를 주박 효소 당화물로 대체하여 제조한 요구르트에서 저장 11일까지 생균수가 $10^7CFU/g$ 이상으로 유지되었다.

• Journal of Microbiology
• /
• 제45권1호
• /
• pp.75-78
• /
• 2007

Nucleotide and amino acid substitution pattern in vif gene of the Korean clade of HIV-1 isolated from Koreans were analyzed using consensus sequences. At nucleotide level, transition/transversion substitution ratio was 1.88, and nonsynonymous/synonymous substitution ratio was 2.67, suggesting a divergent evolution in the Korean clade. At amino acid level, there were 17 substitutions and $G{\rightarrow}E$ substitution at position 37 may be responsible for change in predicted secondary structure.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.356-361
• /
• 2001

The structureal, dielectric and piezoelectric properties of Pb[(Sb$\_$1/2/Nb$\_$1/2/)$\_$x/-(Ni$\_$1/3/Nb$\_$2/3/)$\_$0.15-x/-(Zr$\_$y/Ti$\_$1-y/)$\_$0.85/]O$_3$(x=0∼0.05, y=0.47∼0.52) ceramics were investigated with the substitution of Pb(Sb$\_$1/2/Nb$\_$1/2/)O$_3$(abbreviated PSN) and the Zr/Ti ratio. At Zr/Ti ratio of 50/50, tetragonality was decreased and grain size abruptly decreased with the increase of PSN substitution. Curie temperature was decreased and dielectric constant increased with the substitution of PSN. The coercive field increased and remnant polarization decreased with the substitution of PSN. Electromechanical coupling factor(k$\_$p/) showed the highest value of 0.622 at 1mol% PSN, but mechanical quality factor(Q$\_$m/) showed the minimum value at that composition. Dielectric constant and electromechanical coupling factor with the Zr/Ti ratio showed maximum values at Zr/Ti ratio of 50/50 and mechanical quality factor showed minimum values near the Zr/Ti ratio of 50/50.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

PURPOSES : The objective of this study is to develop an optimized method of mix design for rapid-set lightweight-formed mortar mix. To achieve this objective, the workability, setting time, and compressive strength of mixes under various conditions of mix design were evaluated. METHODS : The water-bonder ratio, fly-ash substitution ratio, and forming agent injection amount were selected as design variables in the study. The fluidity, setting time, density, and strength of the mortar mix were considered as major evaluation criteria of the mixture, and were subsequently utilized to evaluate the characteristics of the mortar mix under various conditions. RESULTS : The observations made from the mix design process are as follows: 1) the air content and fluidity increase as the forming agent ratio and forming agent ratio increase, respectively; 2) the maximum air content is approximately 20%; 3) the accelerating agent decreases the fluidity of the mortar mix by 15% on average; 4) the forming agent injection ratio and fly-ash substitution ratio yield significant effects on the initial and final set times of the mortar mix; 5) as the forming agent injection ratio and fly-ash substitution ratio increase, the compressive strength of the mortar mix decreases; and 6) the 28-day compressive strengths of the forming agent injection ratio and fly-ash substitution ratio yield the most significant effects. CONCLUSIONS : It is concluded that the governing design variables for the rapid-set lightweight-formed mortar mix are the forming agent injection ratio and fly-ash substitution ratio.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.87-92
• /
• 2010

본 연구에서는 실리카흄 대체재로 활용 가능한 실리카 흄 무혼입 결합재(SFFB)의 치환율에 따른 고강도 콘크리트의 품질특성을 비교 분석하기 위하여, 실리카흄, SFFB의 2수준과 물-결합재비는 25, 35% 치환율은 실리카 흄 10%, SFFB 5, 10, 15(%)의 4수준으로 설정하였다. 실험을 실시한 결과, 목표 유동성을 확보하기 위한 고성능감수제의 첨가율은 물-결합재비가 낮을수록 증가하였으며, SFFB가 실리카 흄 보다 저흡수성을 갖는 재료적 특성으로 인해 고성능감수제의 첨가율이 감소하는 경향을 나타내었다. 압축강도에서는 SFFB 치환율이 10%일 경우 인장강도에서는 치환율이 15%일 경우 가장 우수한 강도를 나타내었으며, 자기수축에서는 W/B와 SFFB의 치환율과 상관없이 Plain(SF)에 비해 수축이 저감하는 것으로 나타났다.

• 한국수산과학회지
• /
• 제36권3호
• /
• pp.204-209
• /
• 2003

Utilization of soluble protein recovered from surimi wastewater using calcium powder of cuttle bone were examined. The crude ash content of the heat-induced surimi gel was increased linearly by increasing substitution ratio of recovered protein-ATC toward commercial surimi. Moisture (approximately $76\%$) and lipid $(0.2\%)$ contents were not change, but their protein contents were decreased 15.7 to $14.3\%$ depend on increasing of substitution ratio. The white index of the heat-induced surimi gel by color meter was increased up to $10\%$ of substitution ratio. There were no difference between $0\%\;and\;5\%$ substituted surimi gel in the gel strength. The sensory score on white index and texture of the heat-induced surimi gel did not change in 0 to $10\%$ as a substitution ratio of recovered protein-ATC toward commercial surimi, while decreased in more $15\%.$ The optimal substitution ratio of recovered protein-ATC as a bulking agent was $10\%.$ The heat-induced surimi gel prepared with $10\%$ substitution of recovered protein-ATC was similar to the content and composition of total amino. acids, and superior to calcium content and the ratio of calcium and phosphorus toward those of commercial surimi.

• 산업기술연구
• /
• 제17권
• /
• pp.313-322
• /
• 1997

As the weight of trucks increases, the need for concrete pavement also increases. Therefore, the addition of fly-ash may improve the properties of pavement concrete as well as recycle fly-ash. A full factorial experiment was performed using the primary variables, such as water-cement ratio, fly-ash substitution ratio, and maximum size of coarse aggregate, as a preliminary study for optimum mixture design for pavement concrete. The results of preliminary study indicates that the addition of fly-ash is the most important factor determining concrete strength, followed by the maximum size of coarse aggregate and water-cement ratio. It, also, shows the relative importance of fly-ash substitution ratio, compared to the water-cement ratio, and the interaction effects between the primary variables. Optimum mixture designs for pavement concrete incorporating fly-ash, that satisfied the target responses, were proposed in terms of fly-ash substitution ratio, water cement ratio and maximum size of coarse aggregate.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.89-95
• /
• 2005

Various tests are performed with the recycled concrete including compressive strength, flexural strength, splitting tensile strength, bonding strength and chloride ion penetration test. The basic data obtained from the presented test could be accumulated for the purpose of utilization in concrete structure. Most of the strength tests show that strength decrease a little extent with increasing substitution ratio of recycled coarse aggregate except splitting tensile test for the concrete with $100\%$ recycled fine aggregate. But in case of the $50\%$ substitution of recycled coarse aggregate, compressive strength, flexural strength and bonding strength are almost equal to the normal concrete. Chloride ion penetration test shows that the penetration amounts of chloride ion becomes more in proportion to the substitution ratio of recycled aggregate. But most of the results show that the permeability of recycled concrete is proper to use. The results of present study nay imply that the use of recycled aggregate for steam curing concrete is possible but the substitution ratio of recycled aggregate should be determined through further studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.