• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.1-8
• /
• 1999

In this paper, we have proposed and evaluated the performance of the routiong protocols servicing the mobile and fixed subscribers in a large e scale circuit switched telecommunication network, connected by gateways. The large scale network consists of several subnetworks, and a subnetwork is composed of $M{\times}N$ nodes in grid topology. When a call for mobile subscriber occurs, the current routing protocols search the whole large scale network to find a mobile subscriber. Therefore, it causes many redundant packets and long call setup delay. So, we have proposed a new routing protocol, in which the destination subscriber is first searched at the subnetwork where the call is proposed protocol is better than that of the current protocol.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.448-460
• /
• 2003

In this paper, we propose a network fault recovery algorithm based on a segment restoration scheme to reduce restoration time and restoration resource. The proposed segment restoration scheme is based on network partitioning which divides a large network into several small subnetworks. The restoration performance of the proposed segment restoration scheme depends on the size and the topology of subnetworks. Since most faults can be restored in a subnetwork, restoration time is reduced obviously. We compare and analyze restoration performance according to the size of subnetworks and restoration schemes. From simulation results, the proposed segment restoration scheme has the shortest restoration time compared with other restoration schemes. Especially the restoration performance of the proposed segment restoration scheme is better than the SLSP, which is also a segment-based restoration scheme, in terms of restoration time and required restoration resource capacity.

• Journal of Broadcast Engineering
• /
• v.26 no.6
• /
• pp.725-737
• /
• 2021

Although the performance of cameras is gradually improving now, there are noise in the acquired digital images from the camera, which acts as an obstacle to obtaining high-resolution images. Traditionally, a filtering method has been used for denoising, and a convolutional neural network (CNN), one of the deep learning techniques, has been showing better performance than traditional methods in the field of image denoising, but the details in images could be lost during the learning process. In this paper, we present a CNN for image denoising, which improves image details by learning the details of the image based on wavelet transform. The proposed network uses two subnetworks for detail enhancement and noise extraction. The experiment was conducted through Gaussian noise and real-world noise, we confirmed that our proposed method was able to solve the detail loss problem more effectively than conventional algorithms, and we verified that both objective quality evaluation and subjective quality comparison showed excellent results.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.93-96
• /
• 2000

The CMIP(Common Management Information Protocol) and SNMP(Simple Network Management Network) are the two major network management protocols, Which nee to be integrated. Since the networks need to be managed in a uniform way, the CORBA(Common Object Request Broker Architecture) NE View is to develop as a Standard in the ATM Forum For the TMN management structure to integrate these two protocols. In this paper, the function classes are defined to develop the gateway for efficient subnetwork management. The function classes are defined based on the analysis of EMS functions which are mainly network management design of the TMN structure. Also, the object models of the SMI)(Structure of Management Information) in SNMP and the GDMO(Guidelines for the Definition of Managed Objects) in CMIP are developed way direct translation and abstract translation. The integrated management system design, information model translation of EMS using classdefinition, is efficient is efficient method to interconnect CORBA/SNMP and CORBA/CMIP.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.3
• /
• pp.1-14
• /
• 1994

In this paper, an analytical model of the message delay in the DQDB (Distributed Queue Dual Bus) network is investigated. The DQDB network has been adopted as a subnetwork for the IEEE 802 MAN (Metropolitan Area Network) standard. The DQDB network consists of two high speed undirectional buses and a series of stations attached to both of the buses. Massages arriving at each station consists of severla packets according to its size. This system is approximated into " $B^{[x]}$/G/1 with exceptional first service queueing " by defining the concept of service time on a packet. The service time for a packet is defined as the time from the instant the packet arrives at the transmission buffer until the time the packet is fully transmitted. By using the BASTA property and the average work in the system, the mean message delay time is obtained.age work in the system, the mean message delay time is obtained.d.

• IE interfaces
• /
• v.11 no.3
• /
• pp.55-63
• /
• 1998

In this study we consider a CONWIP system in which the processing times at each station follow an exponential distribution and the demands for the finished products arrive according to a compound Poisson process. The demands that are not satisfied instantaneously are assumed to be lost. We assume that the lot size at each station is greater than one. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, average number of parts at each station and the proportion of lost demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product form approximation method. A recursive technique is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method were compared with those obtained by simulation. Comparisons with simulation have shown that the accuracy of the approximate method is acceptable.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.373-375
• /
• 2000

By DC load flow approximation, we analyzed marginal cost that is the important factor of price signal for network congestion management and expressed as a function of load. In network congestion, a large scale electric network is partitioned into subnetwork to provide a effetive price signal through zonal pricing. We propose a new network partition technique using marginal cost sensitivity with a variety of load consumption.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1049-1055
• /
• 1987

This paper describes a near-optimal standard cell layout strategy which consists of three consecutives steps` partition, placement, and routing. In the partition step, a given network is torn apart into many subnetworks such that each subnetworks contains as many cells as possible with minimum interocnnections between subnetwork. In the placement step, the conventional string placement algorithm was modified. Also, bonding pads were placed such that their connections to the related cells are shortest. As a result for the tested example, the placement time was saved by 60% and the total routing lengths were saved by more than 20% and substantial improvements in the number of feed-through cell and the track density were obtained. The layout program is coded in PASCAL and implemented on a VAX 11-750/UNIX computer.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.154-157
• /
• 1999

Photonic Slot Routing(PSR) is a promising approach to solve the fundamental scalability problem of all-optical packet switched WDM networks. In photonic slot routing, packets destined for the same subnetwork are aggregated to form a photonic slot which is jointly routed as a single unit of information through the network. The relative location of the nodes from bridge may cause to fairness problem in the unidirectional WDM ring network based on PSR. As photonic slots from different subnetworks can originate contentions at the bridge, packets may be dropped and retransmitted. Thus we evaluated the performance of PSR based WDM ring network in the point of fairness for each node and slot contentions at the bridge. Simulation results show that the PSR based WDM ring requires a slot access mechanism to guarantee the transmission fairness and efficient switch architecture to resolve slot contention at the bridge.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.33-39
• /
• 2008

VDL Mode 2 is one of air-to-ground VHF digital data link technologies. The VDL Mode 2 system is designed to be an air-to-ground subnetwork of the Aeronautical Telecommunication Network (ATN) using the AM(R)S band and it is organized according to the Open System Interconnection (OSI) model (defined by ISO). It can be used in ATS Applications especially for ATC communication such as CPDLC and ADS as well. And It is expected VDL Mode 2 replaces ACARS(Aircraft Communications Addressing and Reporting System) which has broadly been used for over 20 years. This paper presents the result of design of operational test equipments for the validation of VDL Mode 2 system under development in KARI.