• 제목/요약/키워드: Subjective Estimation

검색결과 251건 처리시간 0.027초

인더스트리얼 디자인에 있어서의 생산성 개념과 측정방법 (Productivity Concept and Measuaring Mathod of Industrial Design)

  • 이수봉
    • 디자인학연구
    • /
    • 제14권
    • /
    • pp.181-191
    • /
    • 1996
  • $\ulcorner$ID생산성$\lrcorner$이란 $\ulcorner$인더스트리얼 디자인$\lrcorner$(Industrial Design; 이하 ID로 약칭)과 $\ulcorner$생산성$\lrcorner$(Productivity)을 결합한 용어로서 그 개념은 상품의 디자인개발에 투입된 모든 디자인자원 및 요소의 효율적인 이용도를 나타내는 지표로 설명될 수 있다. $\ulcorner$ID생산성$\lrcorner$은객관 적인 방법과 주관적인 방법 두 가지 측면에서 측정 할 수 있다. 전자는 투입과 산출의 관계를 가능한 객관적, 정량적으로 분석한다는 방식이며, 후자는 ID의 방법 자체가 극히 주관적이라는 특성을 전제로 하여 $\ulcorner$ID생산성$\lrcorner$을 가능한 한 정상적으로 분석하는 방법이다. 전자는 디자인 시간, 디자이너 수 , 경비를 공통의 투입요소로 사용하여 개인별.요소별.디자인문문 전체의 디자인 생산성 측정 그 자체가 불가능하며 신뢰성이 없는 단점이 있다. 후자는 Good Design을 산출요소로 사용하여 개인 및 디자인 부문 전체의 합리적 디자인 생산성 측정이 가능한 반면, 주관적 평가를 위한 설문조사나 분석방법 절차 등이 번거러운 단점이 있다. 그러나 이 방법은 전자보다는 매우 합리적이며 신뢰도가 높다는 이점이 있다.

  • PDF

초고속 네트워크 상에서의 스트림형 트래픽의 전송 품질 평가 (Evaluation of Transmission Quality for Stream-type traffics on Very High-speed Network)

  • 이양민;이재기
    • 정보처리학회논문지C
    • /
    • 제11C권6호
    • /
    • pp.773-780
    • /
    • 2004
  • 본 논문에서는 대표적인 스트림형 트래픽인 DV와 MPEG2를 초고속 네트워크 상에서 전송하고 이들 스트림에 대한 최종 사용자의 주관적 평가를 수행하였다. 두 가지 스트림형 데이터에 대해 화질 측정은 ITU-R BT.500-1을 기반으로 하여 측정하였고, 음질 측정은 ITU-R BS.1116-1을 기반으로 측정하였다. 또한 최종 사용자의 주관적 평가를 얻기 위한 실험 방법으로는 DSCQS 5단계 평가 방법을 채택하였다. 유사한 조건하에서 MPEG2 스트림의 경우, 네트워크 트래픽 파라미터가 급증하는 $54\%$의 부하율에서 화질과 음질의 평가 등급이 급격히 하강한다. DV의 경우 화질은 MPEG2와 마찬가지로 $54\%$의 부하율에서 평가 등급이 하락하지만 그 변화의 정도가 MPEG2에 비해 완만하며 점진적인 것을 확인할 수 있다. 반면 DV 음질의 경우는 부하율 $70\%$까지 사용자의 주관적 평가 등급이 우수하여 사용자의 주관적 평가를 고려한 트래픽 제어 및 QoS 제어가 요구된다. 결론적으로 MPEG2의 경우는 네트워크 상의 실측값과 최종 사용자의 주관적 평가가 거의 동일하므로, 네트워크 실측값만으로 트래픽 제어가 가능하고, DV의 경우는 네트워크 상의 실측값과 최종 사용자의 주관적 평가 등급을 동시에 고려한 트래픽 제어가 가능하다.

A Reference Value for Cook's Measure

  • Lee, Jae-Jun
    • Communications for Statistical Applications and Methods
    • /
    • 제6권1호
    • /
    • pp.25-32
    • /
    • 1999
  • A single outlier can influence on the least squares estimators and can invalidate analysis based on these estimators. The Cook's statistic has been introduced to measure influence of individual data point on parameter estimation and the quantile of the F distribution is recommended as a reference value. but in practice subjective judgement is applied in the choice of appropriate quantile. A simple reference value is introduced in this paper which is developed by approximating conditional quantities of Cook's measure. The performance of the proposed criterion is evaluated through analysis of real data set.

  • PDF

Psychophyscial scale에 의한 자료 분류 및 적용 (An data classification and application of psychophyscial scale)

  • 곽효연;제종식
    • 한국컴퓨터정보학회논문지
    • /
    • 제1권1호
    • /
    • pp.139-146
    • /
    • 1996
  • Psychophysical magnitude 측정기법은 인간의 주관적인 느낌 또는 의견을 파악하는데 유용한도구이다 본 논문에서는 phychophyslcal scale를 적용한 결과 회득되는 실험데이타의 특성. 척도의 종류(명목척도, 서열척도, 간격척도 그리고 비율척도) 및 실험데이터의 특성에 적합한 분석방법을 제시하고자 한다.

  • PDF

연결형 합성음성을 이용한 경보음의 주관적 위급도 정량화 (Quantifying the Urgency Perception of Voice Alarm Generated by Concatenative Synthesizer)

  • 장필식;이경태
    • 대한인간공학회지
    • /
    • 제25권2호
    • /
    • pp.63-70
    • /
    • 2006
  • This paper presents an experimental study of the factors modulating the urgency perception of voice alarm generated by concatenative synthesizers. Four experiments were conducted using psycho-physical approach in which 105 participants made magnitude estimation for urgency perception of various voice alarm stimuli. Experiment 1 identified 6 acoustic and non-acoustic factors modulating the perceived urgency of synthesized voice alarm. Experiment 2, 3 and 4 quantified the relations between the objective changes in each of the quantifiable parameters and the subjective changes in urgency perception. This research has implications for the design and implementation of synthesized voice alarm systems where urgency mapping is required.

Fractal 차원과 Variogram을 이용한 암반 불연속면의 굴곡도 특성 서술 (Surface Roughness Characterization of Rock Masses Using the Fractal Dimension and the Variogram)

  • 이영훈
    • 자원환경지질
    • /
    • 제27권1호
    • /
    • pp.81-91
    • /
    • 1994
  • There has been considerable research dealing with the influence of surface roughness along surfaces of rock discontinuities in relation to the peak shear strength of rock masses. Concepts accepted recently for measuring such strength include estimation of a roughness coefficient such as developed by Barton's studies. The method for estimation the Joint Roughness Coefficient (JRC) value of a measured roughness profile is subjective. The aim of this research is to estimate the JRC value of the roughness of a surface profile in a rock mass system using an objective method. The study of roughness of surfaces has included measurement of fractal geometric characteristics. Once the irregularity of the surface has been described by the fractal dimension, the spatial variation of the surface irregularities can be described using variogram and drift analysis. An empirical relationships between the roughness profiles of selected JRC ranges and their fractal dimension with variogram and drift were derived. The application of analyses of fractal dimension, variogram and drift was novel for the analysis of roughness profiles. Also, an empirical equation was applied to experimental data.

  • PDF

웨이브렛 변환 이용한 감쇠율 예측과 승용차 하쉬니스 평가에의 응용 (A Study on Estimation of Damping Coefficient Using Wavelet Transform and Its Application to the Evaluation of Harshness in Passenger Car)

  • 이상권
    • 소음진동
    • /
    • 제9권3호
    • /
    • pp.577-586
    • /
    • 1999
  • Estimation of damping ratio for vibration signals measured on the passenger car's sear is useful for the objective evaluation of impact harshness in car. The vibratio signal is a transient signal represented by many coupled modes of suspension system. Wavelet transform automatically decouples these modes in the time-frequency domain. Damping ratios for decoupled modes are obtained by logarithmic treatment for the Wavelet transformed signal. The objective evaluation using Wavelet transform has been well corresponded with subjective evaluation done by skilled engineers.

  • PDF

TBE 모델을 사용하는 HMM 기반 음성합성기 성능 향상을 위한 하모닉 선택에 기반한 MVF 예측 방법 (Harmonic Peak Picking-based MVF Estimation for Improvement of HMM-based Speech Synthesis System Using TBE Model)

  • 박지훈;한민수
    • 말소리와 음성과학
    • /
    • 제4권4호
    • /
    • pp.79-86
    • /
    • 2012
  • In the two-band excitation (TBE) model, maximum voiced frequency (MVF) is the most important feature of the excitation parameter because the synthetic speech quality depends on MVF. Thus, this paper proposes an enhanced MVF estimation scheme based on the peak picking method. In the proposed scheme, the local peak and the peak lobe are picked from the spectrum of a linear predictive residual signal. The normalized distance between neighboring peak lobes is calculated and utilized as a feature to estimate MVF. Experimental results of both objective and subjective tests show that the proposed scheme improves synthetic speech quality compared with that of the conventional one.

An Improvement on Estimation for Causal Models of Categorical Variables of Abilities and Task Performance

  • Kim, Sung-Ho
    • Communications for Statistical Applications and Methods
    • /
    • 제7권1호
    • /
    • pp.65-86
    • /
    • 2000
  • The estimates from an EM when it is applied to a large causal model of 10 or more categorical variables are often subject to the initial values for the estimates. This phenomenon becomes more serious as the model structure becomes more serious as the model structure becomes more complicated involving more variables. In this regard Wu(1983) recommends among others that EMs are implemented several times with different sets of initial values to obtain more appropriate estimates. in this paper a new approach for initial values is proposed. The main idea is that we use initials that are calibrated to data. A simulation result strongly indicates that the calibrated initials give rise to the estimates that are far closer to the true values than the initials that are not calibrated.

  • PDF

영상의 경계 정보를 이용한 블록기반 시차 예측기법 (Block-based Disparity Estimation Algorithm Using Edge information)

  • 이병진;유지상
    • 한국통신학회논문지
    • /
    • 제28권2C호
    • /
    • pp.121-128
    • /
    • 2003
  • 본 논문에서는 스테레오 영상 압축 시 흔히 사용되는 블록 정합 기법의 문제점인 블록화 에러를 줄일 수 있는 객체기반 블록 정합 기법(object based block matching algorithm : OBMA)을 제안한다. 제안된 OBMA 기법에서는 영상의 경계 정보(edge map)를 추출한 후 블록내의 경계선 정보의 유무를 가지고 영상을 각각의 객체로 나누어 객체별로 변이를 예측함으로써 기존 블록정합 기법에서 발생하던 경계부분에서의 블록화 에러를 줄일 수 있었다. 모의 실험 결과 기존의 블록 정합(block matching) 기법보다 주관적 영상 품질은 현저히 개선하면서도 유사한 성능의 PSNR을 유지할 수 있었다.