• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.227-238
• /
• 1993

IRRI Engineering Division has developed a well drilling rig attachment that matched power tiller or hand tractor. It was designed in response to the growing demand for ground water utilization for small-scale irrigation, especially in drought-sticken and rained farms in Asian countries. The power tiller-driven rig can drill 30 meters of 100mm well in an unconsolidated formation in one day and can be rapidly converted from rotary to jetting or to the percussion method of drilling to suit different soil and rock formation. In addition, the power tiller can be quickly installed or removed from the rig frame and can be used for transporting the rig to other sites. The rig can be dismantled into smaller sub-assemblies for carrying by hand into less accessible areas. One manufacturer in Central luzon Philippines has started to produce the rig for well drillers in Central Luzon. The Department of Agriculture in the Philippines have procured thirty three(33) units of these machines f r their Shallow Tubewell program.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.401-413
• /
• 2015

In this study the progressive collapse resisting capacity of a RC beam-column subassemblage with and without strengthening was investigated. Total of five specimens were tested; two unreinforced specimens, the one designed as gravity load-resisting system and the other as seismic load-resisting system, and three specimens reinforced with: (i) bonded strand, (ii) unbonded strand, and (iii) side steel plates with stud bolts. The two-span subassemblages were designed as part of an eight-story RC building. Monotonically increasing load was applied at the middle column of the specimens and the force-displacement relationships were plotted. It was observed that the gravity load-resisting specimen failed by fractures of re-bars in the beams. In the other specimens no failure was observed until the maximum displacement capacity of the actuator was reached. Highest strength was observed in the structure with unbonded strand. The test result of the specimen with side steel plates in beam-column joints showed that the force-displacement curve increased without fracture of re-bars. Based on the test results it was concluded that the progressive collapse resisting capacity of a RC frame could be significantly enhanced using unbonded strands or side plates with stud bolts.

• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.741-751
• /
• 2011

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mounts have been developed to cope with such specifications. In this study, the active vibration absorber which can be attached to the sub-frame of automobile is used for the suppression of vibrations caused by engine. The active vibration absorbing system consists of sensor, actuator and controller where a control algorithm is implemented using DSP. The vibration caused by engine reveals harmonic disturbances varying with engine revolution. Therefore, the control algorithm should be able to cope with harmonic disturbances. In this study, the modified higher harmonic control technique which can selectively suppress harmonic disturbance is considered. Experimental results on automobile show that the proposed active vibration absorbing system is effective in suppressing vibrations caused by engine.

• 복식문화연구
• /
• 제14권2호
• /
• pp.192-205
• /
• 2006

This study first aims on preparing a systematic analysis basis for the expression aspects of hairstyle in forms of postmodernism. Secondly, it studies the meanings and aspects the hairstyle trend through a post modernism approach about its expression methods based on the suggestive collection hairstyles. Third, it confirms that hairstyle is also one of fashion that can be represented as modern society and culture by explaining that post modernism appears in hairstyles. This study analyzes the expression aspects of hairstyle in forms of post modernism that appears in modern collections by preparing theoretical theories for this study based on former studies related to post modernism theory and clothes from a qualitative analysis. The results of this study prepared a theoretical analysis frame to study the expression aspects of hairstyle in forms of postmodernism first. Secondly, as a result of analyzing based on the analysis, they show that disoriginality of hairstyle can be freely interpreted by the author through borrowing and restoration, disformation through discord and incompletion, discenterization through non-westernization and sub-culture, and inter-text through many symbols and meanings. Thirdly, as the postmodernism movement that represents modern society, culture, and art movement is reflected on hairstyle, it can be considered as a small culture and a product of the era.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.58-66
• /
• 2010

Topology design optimization is a method to determine the optimal distribution of material that yields the minimal compliance of structures, satisfying the constraint of allowable material volume. The method is easy to implement and widely used so that it becomes a powerful design tool in various disciplines. In this paper, a large-scale topology design optimization method is developed using the efficient adjoint sensitivity and optimality criteria methods. Parallel computing technique is required for the efficient topology optimization as well as the precise analysis of large-scale problems. Parallelized finite element analysis consists of the domain decomposition and the boundary communication. The preconditioned conjugate gradient method is employed for the analysis of decomposed sub-domains. The developed parallel computing method in topology optimization is utilized to determine the optimal structural layout of human powered vessel.

• 한국지진공학회논문집
• /
• 제17권3호
• /
• pp.97-105
• /
• 2013

In this paper, the a static experiment of on two reinforced concrete (RC) frame sub-assemblages was conducted to evaluate the seismic behaviors of existing RC frames that were not designed to support a seismic load. The specimens were a one span and actual-sized. One of them had two columns with the same stiffness, but the other had two columns with different stiffness values. As Regarding the test results, lots of many cracks occurred on the surfaces of the columns and beam-column joints for the two specimens, but the cover concrete splitting hardly occurred was minimal until the test ends. In the case of the specimen with the same stiffness offor the two columns, the flexural collapse of the left-side column occurred. However, in the case of the specimen with different stiffness values for of the two columns, the beam-column joint finally collapsed, even though the shear strength of the joint was designed to be strong enough to support the lateral collapse load. The nonlinear Nonlinear static analysis of the two specimens was also conducted using the uniaxial spring model, and the analytical results successfully simulated the nonlinear behaviour of the specimens in accordance with the test results.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.66-71
• /
• 2013

There is a critically structural problem of scaffolding system when one of scaffold columns is remove to be used as a gangway for their temporary office in the structure before finishing all such as an apartment or office building. This is not used to checking to structurally checking at a construction site. This study is to find out which system at a site will be more effective and low-cost-high effectiveness of aluminum ladder, timber ladder, ${\phi}$1/2 inch steel pipe truss with a type of concave, convex warren truss ladders. Theses are structurally tested with horizontal set as a truss type with 1.8 meter long. Concentrated load has been loaded at the upper center of the system and checked its strain at the bottom center, using aluminum-use strain gage and steel-use gauge have been attached concave warren truss with diameter 1/2 inch has 14% stronger than convex truss. Convex truss has almost same strength as an aluminum ladder truss, it is found out.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.115-130
• /
• 2017

A new type of moment-resisting bolted connection was developed for use in composite steel- concrete construction to connect composite open section steel beams to concrete filled steel square tubular columns. The connection was made possible using anchored blind bolts along with two through bolts. It was designed to act compositely with the in-situ reinforced concrete slab to achieve an enhanced stiffness and strength. The developed connection was incorporated in the design of a medium rise (five storey) commercial building which was located in low to medium seismicity regions. The lateral load resisting system for the design building consisted of moment resisting frames in two directions. A major full scale test on a sub-assembly of a perimeter moment-resisting frame of the model building was conducted to study the system behaviour incorporating the proposed connection. The behaviour of the proposed connection and its interaction with the floor slab under cyclic loading representing the earthquake events with return periods of 500 years and 2500 years was investigated. The proposed connection was categorized as semi rigid for unbraced frames based on the classification method presented in Eurocode 3. Furthermore, the proposed connection, composite with the floor slab, successfully provided adequate lateral load resistance for the model building.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.390-395
• /
• 2009

The robustness of audio fingerprinting system in a noisy environment is a principal challenge in the area of content-based audio retrieval. The selected feature for the audio fingerprints must be robust in a noisy environment and the computational complexity of the searching algorithm must be low enough to be executed in real-time. The audio fingerprint proposed by Philips uses expanded hash table lookup to compensate errors introduced by noise. The expanded hash table lookup increases the searching complexity by a factor of 33 times the degree of expansion defined by the hamming distance. We propose a new method to improve noise robustness of audio fingerprinting in noise environment using predominant pitch which reduces the bit error of created hash values. The sub-fingerprint of our approach method is computed in each time frames of audio. The time frame is transformed into the frequency domain using FFT. The obtained audio spectrum is divided into 33 critical bands. Finally, the 32-bit hash value is computed by difference of each bands of energy. And only store bits near predominant pitch. Predominant pitches are extracted in each time frames of audio. The extraction process consists of harmonic enhancement, harmonic summation and selecting a band among critical bands.

• Fisheries and Aquatic Sciences
• /
• 제12권1호
• /
• pp.24-28
• /
• 2009

A tetracycline resistant Vibrio parahaemolyticus, capable of growing on TCBS medium containing tetracycline, was isolated from cultivated fishes. A gene responsible for the tetracycline resistance was cloned from chromosomal DNA of the V. parahaemolyticus strain using Escherichia coli KAM3, which lacks major multi-drug efflux pumps (${\Delta}acrB$) as host cells. The nucleotide sequence and homology analysis revealed an open reading frame (ORF) for tetracycline resistance protein (TetB). In order to characterize the antibiotic resistance of TetB originated from the V. parahaemolyticus strain, the gene was sub cloned into plasmid pSTV28. The resulting plasmid was designated as pSTVTetB and transformated into E. coli KAM3. E. coli KAM3 cells harboring the recombinant plasmid pSTVTetB are able to grow on plates containing tetracycline and oxytetracycline but not doxycycline, indicating that the tetB gene confers the tetracycline- and oxytetracycline-resistance to the host cell.