• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.835-842
• /
• 2004

In this paper, we have analyzed the MC-DS/CDMA system with input signal synchronized completely through adjustment of the gain in the PLL loop, by using the hybrid SC/MRC-(2/3) technique, which is said to one of the optimal diversity techniques under the multi-path fading environment, assuming that phase error is defined to the phase difference between the received signal from the multi-path and the reference signal in the PLL of the receiver. Also, assuming that the regarded radio channel model for the mobile communication is subject to the Nakagami-m fading channel, we have developed the expressions and performed the simulation under the consideration of various factor, in the MC/DS-CDMA system with the hybrid SC.MRC-(2/3) diversity method, such as the Nakagami fading index(m), $the\;number\;of\;paths\;(L_p),$ the number of hybrid SC.MRC-(2/3) $diversity\;branches\;(L,\;L_c),$ the number of users (K), the number of subcarriers (U), and the gain in the PLL loop. As a result of the simulation, it has been confirmed that the performance improvement of the system can be achieved by adjusting properly the PLL loop in order for the MC/DS-CDMA system with the hybrid SC/MRC-(2/3) diversity method to receive a fully synchronized signal. And the value of the gain in the PLL loop should exceed 7dB in order for the system to receive the signal with prefect synchronization, even though there might be a slight difference according to the values of the fading index and the spread processing gain of the subcarrier.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.3
• /
• pp.31-38
• /
• 2005

This paper proposes an implementation method of intelligent characters that can properly adapt to action patterns of opponent characters in fighting games by using genetic algorithm. For this intelligent characters, past actions patterns of opponent characters should be included in the learning process. To verify the effectiveness of the proposed method, two types of experiments are performed and their results are compared. In first experiment(exp-1), intelligent characters consider current action and its step of an opponent character. In second experiment (exp-2), on the other hands, they take past actions of an opponent characters into account additionally. As a performance index, the ratio of score obtained by an intelligent character to that of an opponent character is adopted. Experimental results shows that even if the performance index of exp-1 is better than that of exp-2 at the beginning of stages, but the performance index of exp-2 outperforms that of exp-1 as stages go on. Moreover, optimum solutions are always found in all experimental cases in exp-2. Futhermore, intelligent characters in exp-2 could learn moving actions (forward and backward) and waiting actions for getting more scores through self evolution.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.13-38
• /
• 2006

Range query is one of the most important operations for spatial objects, it retrieves all spatial objects that overlap a given query region in multi-dimensional space. The DOT(DOuble Transformation) is known as an efficient indexing methods, it transforms the MBR of a spatial object into a single numeric value using a space filling curve, and stores the value in a $B^+$-tree. The DOT index is possible to be employed as a primary index for spatial objects. However, the range query processing based on the DOT index requires much overhead for spatial transformations to get the query region in the final space. Also, the detailed range query processing method for 2-dimensional spatial objects has not been studied yet in this paper, we propose an efficient multi-dimensional range query processing technique based on the DOT index. The proposed technique exploits the regularities in the moving patterns of space filling curves to divide a query region into a set of maximal sub-legions within which space filling curves traverse without interruption. Such division reduces the number of spatial transformations required to perform the range query and thus improves the performance of range query processing. A visual simulator is developed to show the evaluation method and the performance of our technique.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.646-651
• /
• 2017

The purpose of this study is to design a proper evaluation method for analysing the safety management efficiency of coastal ship companies, and to verify these evaluation standards by applying them to a representative company. For this purpose, 5 evaluation items and 14 specific sub-evaluation elements have been determined after collecting practical opinions from a group of expert, which consisted of safety managers in passenger ship companies, public servants as a ship inspector, passenger ship operations managers, etc. Next, the safety management levels of 44 coastal passenger ship companies were evaluated using these standards. Finally, the validity of the proposed evaluation method was verified through comparison analysis between the evaluation results and the ratio of major marine accidents. It was determined that companies with low evaluation levels were saw more major marine accidents than other coastal passenger ship companies, spurring greater interest in safety management. In conclusion, evaluation standards allow coastal passenger ship companies to voluntarily assess their safety management level were established. The result can also be applied to analyse the operation efficiency of coastal passenger ship companies.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.80-86
• /
• 2002

Volatile compounds in three different kinds of crude vinegars obtained from oak (Quercus serrata), bamboo (phyllostachys) and pine (Pinus densiflora) species were analyzed by the solid-phase microextraction (SPME) method. A total of 264 peaks were detected on the chromatograms obtained from the polar (CBP 20) and the nonpolar (CBP 1) columns, which were used for analyzing the volatile compounds in these vinegars. The major volatile compounds identified by using the polar column were 2-butanone, acetic acid, guaiacol, phenol, cresols, 4-ethyl guaiacol, 4-ethyl phenol, and syringol. Using the nonpolar column, seven compounds could be identified: 1,2-dimethoxybenzyl alcohol, 1-hydroxy-2-butanone, 1-(2-furanyl)-1-propane, ethisolide, furfuryl acetate, 1,2-dimethoxybenzene, phenyl acetate. The volatile compounds were classified into five groups: phenols, neutral compounds, organic acids, esters and others. The phenols were the main component and comprised 49~65% of the volatile compounds of these vinegars. In the case of bamboo vinegar, the proportion of the phenols in the volatile compounds was lower than that of the two wood vinegars. However, the proportions of the neutral compounds and the organic acids were higher than those of the wood vinegars. Therefore, it seems that these differences of the proportions of the volatile compounds would make a certain difference of a smoke flavor between the bamboo vinegar and the wood vinegars.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.558-564
• /
• 2001

For the study of morphological variation in winter buds of Q. variabilis $B_L$. natural populations in Korea, 16 populations were selected through the country in consideration of latitude, longitude, altitude, and geographical characters. Thirty trees were randomly selected from each population and 30 terminal and 30 lateral buds were sampled below 1/3 crown length of each tree. Four morphological characters including length and width of terminal and lateral buds were measured. 1. Length and width of terminal and lateral buds were in the ranges 6.9~11.3cm, 3.0~3.7cm, 6.1~8.9cm, and 2.5~3.1cm, respectively. The coefficient of variation were in about 20% in all the characters investigated. 2. All the characters were significantly different among populations as well as among individuals within populations. The degree of contribution of variance among individuals within populations was higher than that among populations. 3. Length of terminal bud showed positive correlation with length and width of lateral bud; and width of lateral bud with width of terminal bud and length of lateral bud. Also, positive correlations were observed between longitude and width of terminal bud, between latitude and length of terminal and lateral bud. 4. Cluster analysis using complete linkage method for winter bud characters showed two groups to Euclidean distance 3.4. They were group I of population 8 and group II of populations 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, and 16. However, group II was divided into two at Euclidean distance 1.5 that are a group including populations 1, 2, 7, 9, and 11(groupII-1) and the other group including populations 3, 4, 5, 6, 10, 12, 13, 14, 15, and 16(groupII-2).

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.672-680
• /
• 2011

The purpose of this study has been carried to develop a criterion for the selection of evaluation factors on Forest Carbon Cycle Community(F.C.C.C) based on the result of survey of 96 participants who were operation managers on mountain eco village(31), relevant experts(33), and officers of local government(32). For analysis of the results of survey, DHP(Delphi Hierarchy Process) method was used which is a combination of Delphi method and AHP(Analytic Hierarchy Process) method. The key factors on selection of a suitable area to launch F.C.C.C. project of Korea Forest Service was selected under three hierarchical classes. Class 1 comprises 3 indices(Physical resource index, Human resource index, Vision index), and Class 2 which contains 10 indices (Existing resource, Surroundings resource, Forest biomass resource, Humanities Social quality, Local resident participation, Leader's ability, External support, Planning of operation, Capability of operation, and Effect of operation). Class 3 is sub-level class of class which possess 38 indices. From the results of analysis, Consistency Index(C.I) of each index in the 3 classes was used as evaluation factor. In Class 1, index 'human resources' showed highest Consistency Index(0.454). In Class 2, index 'forest biomass resources' was the highest Consistency Index(0.376) in 'physical resources' of Class 1, index 'leader's ability' was the highest Consistency Index(0.326) in 'human resources' of Class 1, and index 'planning of operation' was the highest Consistency Index(0.346) in 'vision' of Class 1. In Class 3, relative importance of 38 index including 'Joint ownership land security(C.I.-0.266)' was evaluated. Based on the result of this study, a criterion for the selection of evaluation factors for F.C.C.C was developed and the evaluation criterion is expected to be use to select of a suitable area to launch F.C.C.C. project since 2011.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.895-904
• /
• 2007

This paper proposes a robust sub-optimal smart antenna in Code Division Multiple Access (CDMA) basestation. It makes use of the property of the Least Mean Square (LMS) algorithm and the Conjugate Gradient Method (CGM) algorithm for beamforming processes. The weight update takes place at symbol level which follows the PN correlators of receiver module under the assumption that the post correlation desired signal power is far larger than the power of each of the interfering signals. The proposed algorithm is simple and has as low computational load as five times of the number of antenna elements(O(5N)) as a whole per each snapshot. The output Signal to Interference plus Noise Ratio (SINR) of the proposed smart antenna system when the weight vector reaches the steady state has been examined. It has been observed in computer simulations that proposed beamforming algorithm improves the SINR significantly compared to the single antenna case. The convergence property of the weight vector has also been investigated to show that the proposed hybrid algorithm performs better than CGM and LMS during the initial stage of the weight update iteration. The Bit Error Rate (BER) characteristics of the proposed array has also been shown as the processor input Signal to Noise Ratio (SNR) varies.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.11
• /
• pp.25-31
• /
• 2015

Elastic behavior of the railway roadbed which supports the repeating dynamic loads of the train is mainly affected by the shear modulus of the upper roadbed. Therefore, shear wave velocity estimation of the uniformly compacted roadbed can be used to estimate the elastic behavior of the railway roadbed. The objective of this study is to suggest the relationship between the dynamic cone penetration index (DCPI) and the shear wave velocity ($V_s$) of the upper roadbed in order to estimate the shear wave velocity by using the dynamic cone penetration test (DCPT). To ensure the reliability of the relationship, the dynamic cone penetration test and the measurement of the shear wave velocity are conducted on the constructed upper roadbed. As a method for measurement of the shear wave velocity, cross hole is used and then the dynamic cone penetration test is performed at a center point between the source and the receiver of the cross hole. As a result of the correlation of the dynamic cone penetration index and the shear wave velocity at the same depths, the shear wave velocity is estimated as a form of involution of the dynamic cone penetration index with a determinant coefficient above 0.8. The result of this study can be used to estimate both the shear wave velocity and the strength of the railway roadbed using the dynamic cone penetrometer.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.347-360
• /
• 2010

In order to develop the multi-residue purification method for 180 pesticides commonly used in Korea, many analytical methods on individual and multi- pesticide residues in the agricultural commodities and food product were examined. Through the modification of adsorption chromatographic methods used in Europe, the United States and Korea, the Florisil and silica-gel chromatographic systems were developed. Through these purification systems, elution profiles for all pesticides were examined. As the results, 145 pesticides were recovered in the range of 70-120% in Florisil clean-up system. The distribution of pesticides in the elution profile was 12 pesticides in the first fraction, 76 pesticides in the second fraction, 81 pesticides in the third fraction, 60 pesticides in the fourth fraction and 30 pesticides in the last fraction. And, in silica-gel system, 137 pesticides were recovered in the range of 70~120%. The distribution of pesticides in the elution profile was 22 pesticides in the first fraction, 59 pesticides in the second fraction, 102 pesticides in the third fraction, 46 pesticides in the fourth fraction and 8 pesticides in the last fraction.