• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.47-54
• /
• 2020

본 연구에서는 밝고 화사한 적색 및 황색의 착색 특성을 가지며, 우수한 발광특을 가진 새로운 무기 형광 안료를 개발하기 위하여, A₃V₅O₁₄ (A = K and Rb) 및 Cs₂V₄O₁₁를 water assisted solid state reaction(WASSR) 방법과 고상법을 혼합하여 합성을 하였다. 합성한 A₃V₅O₁₄ (A = K and Rb ) 및 Cs₂V₄O₁₁ 샘플은 AVO₃ 및 AV₃O₈ (A = K, Rb and Cs)가 불순물로 다소 확인되었으나, trigonal 구조의 A₃V₅O₁₄ (A = K and Rb)와 orthorhombic 구조의 Cs₂V₄O₁₁가 주상으로 확인되었다. A₃V₅O₁₄ (A = K and Rb)와 Cs₂V₄O₁₁는 자외선 영역에서 강한 광흡수를 나타내었으며, 각각 적색광 및 녹색광 발광을 나타내었다. 또한, 합성된 A₃V₅O₁₄ (A = K and Rb)는 a* 값 (+ : 적색도, -: 녹색도)은 각각 + 35.5와 + 45.9를, Cs₂V₄O₁₁는 b* 값(+: 황색도, -: 청색도)는 + 50.3을 나타내었으며, 45 이상의 L* 값(명도)을 가지고 있어, 밝고 화사한 느낌을 구현하기위한 황색안료로 응용이 가능할 것으로 기대된다.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.78-82
• /
• 2011

초임계 ₂추출은 기존의 금속추출/용매추출 공정을 대체할 수 있는 새로운 공정으로써의 큰 가능성을 가지고 있는 기술이다. 초임계 ₂를 이용하여 황산코발트용액으로부터 코발트의 추출에 대한 연구를 수행하였다. 코발트의 추출을 위해 bis (2,4,4-trimethylpentyl) phosphinic acid 및 diethylamine을 초임계 ₂와 함께 추출제로 사용하였으며 ₂의 추출거동을 관찰하였다. 초임계 ₂추출은 $60^{\circ}C$, 200 bar의 조건에서 실시하였고 실험은 초임계 ₂추출제 착염화과정과 금속추출과정으로 구성된 공정을 이용하여 진행하였다. 실험결과 코발트의 추출률은 추출제 투입량에 따라 16-99%까지 증가하였다.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• 한국분말재료학회지
• /
• 제28권3호
• /
• pp.221-226
• /
• 2021

We fabricate the non-equiatomic high-entropy alloy (NE-HEA) Fe_49.5Mn₃₀Co₁₀Cr₁₀C_0.5 (at.%) using spark plasma sintering under various sintering conditions. Each elemental pure powder is milled by high-energy ball milling to prepare NE-HEA powder. The microstructure and mechanical properties of the sintered samples are investigated using various methods. We use the X-ray diffraction (XRD) method to investigate the microstructural characteristics. Quantitative phase analysis is performed by direct comparison of the XRD results. A tensile test is used to compare the mechanical properties of small samples. Next, electron backscatter diffraction analysis is performed to analyze the phase fraction, and the results are compared to those of XRD analysis. By combining different sintering durations and temperature conditions, we attempt to identify suitable spark plasma sintering conditions that yield mechanical properties comparable with previously reported values. The samples sintered at 900 and 1000℃ with no holding time have a tensile strength of over 1000 MPa.

• 분석과학
• /
• 제35권5호
• /
• pp.205-211
• /
• 2022

Deuterium (D) is an isotope with one more neutron number than hydrogen (H). Heavy elements rarely change their chemical properties with little effect even if the number of neutrons increases, but low-mass elements change their vibration energy, diffusion rate, and reaction rate because the effect cannot be ignored, which is called an isotope effect. Recently, in the semiconductor and display industries, there is a trend to replace hydrogen gas (H₂) with deuterium gas (D₂) in order to improve process stability and product quality by using the isotope effect. In addition, as the demand for D₂ in industries increases, domestic gas producers are making efforts to produce and supply D₂ on their own. In the case of high purity D₂, most of them are produced by electrolysis of heavy water (D₂O), and among D₂, hydrogen deuteride (HD) molecules are present as isotope impurities. Therefore, in order to maximize the isotope effect of hydrogen in the electronic industry, HD, which is an isotope impurity of D₂ used in the process, should be small amount. To this end, purity analysis of D₂ for industrial processing is essential. In this study, HD quantitative analysis of D₂ for high purity D₂ purity analysis was established and hydrogen isotope RM (Reference material) was developed. Since hydrogen isotopes are difficult to analyze with general gas analysis instrument, they were analyzed using a high-precision mass spectrometer (Gas/MS, Finnigan MAT271). High purity HD gas was injected into Gas/MS, sensitivity was determined by a signal according to pressure, and HD concentrations in two bottles of D₂ were quantified using the corresponding sensitivity. The amount fraction of HD in each D₂ was (4518 ± 275) μmol/mol, (2282 ± 144) μmol/mol. D₂, which quantifies HD amount using the developed quantitative analysis method, will be manufactured with hydrogen isotope RM and distributed for quality management and maintenance of electronic industries and gas producers in the future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.609-612
• /
• 2001

An adaptive sub-optimal method using a preset threshold for combining partial transmit sequence (PTS) of an orthogonal frequency division multiplexing (OFDM) signal is presented. The results show that adaptive sub-optimal method reduces the 0.1% PAP by 3.4dB, while iterative flipping method reduces it by 3dB and PTS reduce it by 4.1dB. The complexity of adaptive sub-optimal method is 2.4% of that of PTS method for M=8.

• Journal of Animal Science and Technology
• /
• 제65권4호
• /
• pp.720-734
• /
• 2023

In Korea, Korea Proven Bulls (KPN) program has been well-developed. Breeding and evaluation of cows are also an essential factor to increase earnings and genetic gain. This study aimed to evaluate the accuracy of cow breeding value by using three methods (pedigree index [PI], pedigree-based best linear unbiased prediction [PBLUP], and genomic-BLUP [GBLUP]). The reference population (n = 16,971) was used to estimate breeding values for 481 females as a test population. The accuracy of GBLUP was 0.63, 0.66, 0.62 and 0.63 for carcass weight (CWT), eye muscle area (EMA), back-fat thickness (BFT), and marbling score (MS), respectively. As for the PBLUP method, accuracy of prediction was 0.43 for CWT, 0.45 for EMA, 0.43 for MS, and 0.44 for BFT. Accuracy of PI method was the lowest (0.28 to 0.29 for carcass traits). The increase by approximate 20% in accuracy of GBLUP method than other methods could be because genomic information may explain Mendelian sampling error that pedigree information cannot detect. Bias can cause reducing accuracy of estimated breeding value (EBV) for selected animals. Regression coefficient between true breeding value (TBV) and GBLUP EBV, PBLUP EBV, and PI EBV were 0.78, 0.625, and 0.35, respectively for CWT. This showed that genomic EBV (GEBV) is less biased than PBLUP and PI EBV in this study. In addition, number of effective chromosome segments (M_e) statistic that indicates the independent loci is one of the important factors affecting the accuracy of BLUP. The correlation between M_e and the accuracy of GBLUP is related to the genetic relationship between reference and test population. The correlations between M_e and accuracy were -0.74 in CWT, -0.75 in EMA, -0.73 in MS, and -0.75 in BF, which were strongly negative. These results proved that the estimation of genetic ability using genomic data is the most effective, and the smaller the M_e, the higher the accuracy of EBV.

• 분석과학
• /
• 제35권6호
• /
• pp.249-255
• /
• 2022

본 연구에서는 기체 크로마토그래피-불꽃이온화검출기(GC-FID)를 이용한 고순도 질소의 새로운 순도분석법을 개발하였다. 고순도 질소에 존재할 수 있는 불순물인 일산화탄소(CO), 이산화탄소(CO₂), 및 메탄(CH₄)에 대한 3 µmol/mol 수준의 인증표준물질(Certified reference material, CRM)을 중량법을 이용하여 제조하였고, 이를 순도분석에 활용하였다. 개발된 순도분석법에서는 운반가스로 초고순도 질소와 순도분석 대상 질소를 사용하여, 제조된 인증표준물질의 기체 크로마토그래피에서 얻어지는 크로마토그램의 면적 값 차이를 비교함으로써 순도분석 대상 질소의 불순물을 정량 분석하였다. 순도분석 대상 질소로는 액체질소 및 제조사가 각기 다른 3곳의 고순도 질소를 사용하였다. 또한, 개발된 순도분석법의 유효성을 평가하기 위하여 순도분석 대상 질소 내 불순물의 물질량 분율을 기존 순도분석법과 비교하였다. 두 가지 순도분석법을 이용하였을 때 대상 질소 내 불순물의 물질량 분율이 불확도 (k = 2) 내에서 서로 일치함을 확인함으로써, 개발된 순도분석법이 유효함을 확인하였다.

• 공업화학
• /
• 제9권6호
• /
• pp.920-923
• /
• 1998

본 연구에서는 활성탄소를 산성 및 염기성 용액으로 처리하여 pH변화에 따른 흡착 특성을 비교 분석하였다. 처리하지 않은 일반 활성 탄소와 30 wt. % HCl 및 30 wt. % NaOH 용액으로 처리된 활성탄소의 표면 산도 및 표면 염기도를 Boehm의 선택 중화법을 이용하여 측정하였으며, 그 흡착표면적과 기공도 등은 BET 법을 이용한 $N_2$ 기체 흡착을 통해 알아보았다. 또한 산, 염기 처리된 활성탄소의 흡착 특성을 비교하기 위해 $CO_2$ 및 $NH_3$ 기체의 흡착 실험을 수행하였다. 그 결과 일반 활성탄소와 산성 또는 염기성 용액으로 각각 처리된 활성탄소의 물리적인 표면구조는 큰 변화를 나타내지 않았으나, $CO_2$ 및 $NH_3$에서의 흡착에 있어서 화학적 처리에 따른 서로 다른 표면 관능기에 의하여 상대적으로 향상된 흡착 거동을 나타내었다.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2008

ZnS-$SiO_2$ composite is normally used for sputtering target. In recent years, high sputtering power for higher deposition rate often causes crack formation of the target. Therefore the target material is required that the sintered target material should have high crack resistance, excellent strength and a homogeneous microstructure with high sintered density. In this study, raw ZnS and ZnS-$SiO_2$ powders prepared by a 3-D mixer or high energy ball-milling were successfully densified by spark plasma sintering, the effective densification method of hard-to-sinter materials in a short time. After sintering, the fracture toughness was measured by the indentation fracture (IF) method. Due to the effect of crack deflection by the residual stress occurred by the second phase of fine $SiO_2$, the hardness and fracture toughness reached to 3.031 GPa and $1.014MPa{\cdot}m^{1/2}$, respectively.