• The Journal of Fisheries Business Administration
• /
• v.16 no.1
• /
• pp.91-124
• /
• 1985

Mariculture is contrasted with inland aqua-culturing fisheries. It is defind as the Industry of rearing Aquaorganism in limited coastal area relatively shallow in depth. Then, It's coming into being realization of Mariculture in it is long in history that Mariculture was realized in Korea. But it is from the early part of 1960s, that this industry has normally developed. Owing to 200 miles economy-zone problems of coastal countries, the development of deep sea fishing was limited, so the Korean Government has now appreciated the importance of cultured industries in the field of coastal fisheries. And the Korean Mariculture the output of which was only 18, 000 M/T in '60s attained 540, 000M/T in 1980s, has now occupied its relative importance in Korean Fisheries Industry. So the purpose of this report is to suggest the prospect of technical development of mariculture in the future of Korea, through the analysis of the various problems that affect upon the individual management '||'&'||' fishing ground utilization, along with the appreciation of "how to extend of those technical innovation" and "how the fishermen's technique level is extended at this stage. According to this study, the result is summarized as follows. First, Maricultural technique is classified into 8 sub-techniques as follows, as shown in fig. 1.Fig. 1. The Formation structure of mariculture technique Second, the change of technical method of mariculture in coastal area of Korea has made as 5 stages; 1) Scattering of culturing organism 2) Culturing by putting stone and installing bamboo 3) Culturing by installing rope and seeding 4) Culturing of putting objectives in cages 5) Culturing fish by feed Third, the maricultural fisheries of Korea has about 70 years long in history. It began from 1910s. But at that time there was no special technique in aquaculture and its technique was confined in searching out the object of species. The species was laver, oyster ect.Forth, although realization of mariculture in Korea has been long time, it is of late from 1960s that this has been industrial with normal development, and its technique of mariculture has mainly has developed from 1970s. Its result not only contributed to the high growth in Korean ecconomy along with the well balanced development between industires, but also it played a great role for the resolution of nation's food problem. Especially maricultural production has shown its sustained annual increase of 13.8% during the last 20 years. So the portion of mariculture among total fisheries stucture was extended from 4.1% in the early 1960s to 22.4% in 1980s.Fifth, it could be safely said that such development in maricultural field is resulted from the activity of aquacultural institutes such as Fisheries Reseach '||'&'||' Development production of major kinds such as Oyster, Sea-mustard, and Laver etc. As well as in the innovation of aquaculturing method with synthetic fiber utilization. FRDA has played important role in the efficient propargation of new aquacultural technique.Sixth, as for the change in aquaculture structure and its during period between 1970s and 1980s, the private management participation shown 25% increase from household number of 45, 173 to 56, 268 in total number. And in the respect of the management scale, of their management decreased, while it showed an increase in relative large scale management, the increase over 3 employees compared with other fisheries field between '70s and 80s. This must be an major trait to be recorded, Now the data above mentioned are shown as in table 1 and 2.Table 1. The maricultural fishing ground development situation in 982.Table 2. The mariculture management as seen in the employmnet size in high seasion.Owing to the technical innovation, of the mariculture in coastal area new income of fishermen increased and it also is true that the number of fishermen participating in its industrialization increased. But the problem being from now on is the self-discharge of the destruction fishing ground considered resulted from rapid expansion in aquaculture industry and the preventive system of sentility of fishing ground. sentility of fishing ground.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.43-61
• /
• 2019

Development of technologies in artificial intelligence has been rapidly increasing with the Fourth Industrial Revolution, and researches related to AI have been actively conducted in a variety of fields such as autonomous vehicles, natural language processing, and robotics. These researches have been focused on solving cognitive problems such as learning and problem solving related to human intelligence from the 1950s. The field of artificial intelligence has achieved more technological advance than ever, due to recent interest in technology and research on various algorithms. The knowledge-based system is a sub-domain of artificial intelligence, and it aims to enable artificial intelligence agents to make decisions by using machine-readable and processible knowledge constructed from complex and informal human knowledge and rules in various fields. A knowledge base is used to optimize information collection, organization, and retrieval, and recently it is used with statistical artificial intelligence such as machine learning. Recently, the purpose of the knowledge base is to express, publish, and share knowledge on the web by describing and connecting web resources such as pages and data. These knowledge bases are used for intelligent processing in various fields of artificial intelligence such as question answering system of the smart speaker. However, building a useful knowledge base is a time-consuming task and still requires a lot of effort of the experts. In recent years, many kinds of research and technologies of knowledge based artificial intelligence use DBpedia that is one of the biggest knowledge base aiming to extract structured content from the various information of Wikipedia. DBpedia contains various information extracted from Wikipedia such as a title, categories, and links, but the most useful knowledge is from infobox of Wikipedia that presents a summary of some unifying aspect created by users. These knowledge are created by the mapping rule between infobox structures and DBpedia ontology schema defined in DBpedia Extraction Framework. In this way, DBpedia can expect high reliability in terms of accuracy of knowledge by using the method of generating knowledge from semi-structured infobox data created by users. However, since only about 50% of all wiki pages contain infobox in Korean Wikipedia, DBpedia has limitations in term of knowledge scalability. This paper proposes a method to extract knowledge from text documents according to the ontology schema using machine learning. In order to demonstrate the appropriateness of this method, we explain a knowledge extraction model according to the DBpedia ontology schema by learning Wikipedia infoboxes. Our knowledge extraction model consists of three steps, document classification as ontology classes, proper sentence classification to extract triples, and value selection and transformation into RDF triple structure. The structure of Wikipedia infobox are defined as infobox templates that provide standardized information across related articles, and DBpedia ontology schema can be mapped these infobox templates. Based on these mapping relations, we classify the input document according to infobox categories which means ontology classes. After determining the classification of the input document, we classify the appropriate sentence according to attributes belonging to the classification. Finally, we extract knowledge from sentences that are classified as appropriate, and we convert knowledge into a form of triples. In order to train models, we generated training data set from Wikipedia dump using a method to add BIO tags to sentences, so we trained about 200 classes and about 2,500 relations for extracting knowledge. Furthermore, we evaluated comparative experiments of CRF and Bi-LSTM-CRF for the knowledge extraction process. Through this proposed process, it is possible to utilize structured knowledge by extracting knowledge according to the ontology schema from text documents. In addition, this methodology can significantly reduce the effort of the experts to construct instances according to the ontology schema.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.105-115
• /
• 2016

This study was carried out to establish the optimum forest management plan for the Cryptomeria japonica plantations in southern inland and Jeju island in Korea. Sixty seven circular sample plots of 0.04ha were established and we surveyed vegetation structure and growth characteristics from three layers(upper, middle, and lower). As a result of cluster analysis obtained by importance values of each tree species, the community type of C. japonica stands were classified into C. japonica group(C1) and C. japonica-C obtusa group. C. obtusa community were also sbudivided into P. thunbergii-Q. serrata group(C2) and Q. serrata-C obtusa group(C3). In tree layers importance value(IV) of C. japonica were 97.2% in C1, 80.7% in C2, and 47.6% in C3 and in sub-tree layers IV were 8.9% in C1, 15.2% in C2, and 5.7% in C3. Especially in C3 there are bamboo species (Smilacina japonica var. lutecarpa and Pseudosasa japonica) it is necessary for us to control them. In shrub layers C. japonica were found in C1(9.2%) and C2(7.0%), but except for C3. In tree layer species diversity indices of each community ranged from the lowest 0.059 in C1 to the highest 0.548 in C3. Dominance ranged from 0.958 in C1 to 0.393 in C3 which may caused by interspecific competition. Current annual increment of diameter growth ranged from 7.01mm/yr to 8.04mm/yr. As a result of our study we recommend the application of proper thinning and pruning for C1 and C2.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Journal of The Korean Association For Science Education
• /
• v.4 no.1
• /
• pp.1-14
• /
• 1984

The student's attitude toward science is generally influenced by their teachers. Therefore, teachers' positive attitudes toward science and science teaching play an important role to change the student's attitude toward science. The purpose of this survey is to investigate the status on attitudes toward science and science teaching among the secondary school science teachers in Korea. The attitudes were surveyed by the questionnaire which was developed by Sung-Jae Pak. The instrument is designed to use Likert type scale and is composed of two kinds of scale: one is the attitudes toward science scale (the AT scale) and the other is the attitudes toward science teaching scale (the AT Kale), which contains 24 questions respectively. Each of them has 6 sub-level areas. The six areas of attitude toward science are as follow: The goals and values, process and method of science, knowledge and the view of nature, social and cultural aspects, scientist and a career in science, the preferences and willingness. The six areas of attitude toward science teaching are as follow: The goals and values, process and method of science teaching, the content and structure, social and cultural aspects, science educator and a career in science teaching, satisfaction and willingness. From 152 teachers' responses, the tendency of total as well as each area and the contrast of their backgrounds at the level of 5% significance were analyzed by SPSS computer program. Some results and conclusion of the study are as follow: 1. The overall attitude of the measured secondary school science teachers shows a positive trend tendency. Also total positive attitude toward science teaching are slightly higher than that of science, which support the fact that the teachers are not scientists but they are directly involved in teaching of science. 2. The attitudes toward science are moderately correlated to the attitudes toward science teaching (r=0.52). 3. The areas of knowledge, nature-view and tile area of social aspects of science show a very negative tendency. Also the two areas are not correlated to some other areal at the level at 5% significance. 4. Female science teachers exhibit just a little more positive attitudes than those of male teachers in science teaching. 5. The science teachers who wanted to have a profession of scholar or educator exhibit a little more positive attitudes than others in science and total attitudes (AS+AT). 6. The more the science teachers have "intellectual delights" the more their attitudes toward science and science teaching are positive. 7. At the level of 5% significance, there are differences which college they graduated from, but there are no differences in multiple comparison at 10% level. 8. The differences in their background dose not appear in such as age; teaching career; academic career; deny the superstition; their onlook for the scientist or educator when they were freshmen; major the basic science; opinions about the U.F.O. and the origin of life. 9. The responses of certain individual statement are quite different from the overall tendencies, which strongly suggest the de1ailed analysis and deeper study. For the continuing study, it is recommendable to revile the measuring tools with the theoretical study for the better validity and reliability, and investigate the status of the attitudes toward science and science teaching among the science teachers with sufficient samples.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2010

Seismic reflection surveying is one of the most widely used and effective techniques for coal seam structure delineation and risk mitigation for underground longwall mining. However, the ability of the method can be compromised by the presence of volcanic cover. This problem arises within parts of the Bowen and Sydney Basins of Australia and seismic surveying can be unsuccessful. As a consequence, such areas are less attractive for coal mining. Techniques to improve the success of seismic surveying over basalt flows are needed. In this paper, we use elastic wave-equation-based forward modelling techniques to investigate the effects and characteristics of seismic wave propagation under different settings involving changes in basalt properties, its thickness, lateral extent, relative position to the shot position and various forms of inhomogeneity. The modelling results suggests that: 1) basalts with high impedance contrasts and multiple flows generate strong multiples and weak reflectors; 2) thin basalts have less effect than thick basalts; 3) partial basalt cover has less effect than full basalt cover; 4) low frequency seismic waves (especially at large offsets) have better penetration through the basalt than high frequency waves; and 5) the deeper the coal seams are below basalts of limited extent, the less influence the basalts will have on the wave propagation. In addition to providing insights into the issues that arise when seismic surveying under basalts, these observations suggest that careful management of seismic noise and the acquisition of long-offset seismic data with low-frequency geophones have the potential to improve the seismic results.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.223-246
• /
• 2013

Even though cartoons and narration comics were born from different origin, they have been called by names such as 'cartoons' or 'comics'. The reason can be found in the similarity of cartoons and narration comics. The similarity of cartoons and narration comics is the genre consisting of writing and drawing. Writing can be the format of expression and it can represent the story. Such story is present as a component of 'narration'. Sub genre of comics includes cartoons and narration comics. It includes animation in a broad range. In cases of narration comics and animation, it is thought that narration is present with continuity of time. However, in case of cartoon, because one or two cuts without continuity of writing are frequently expressed, it is being asked whether narration is present. It is easy to be reminded of epic or chanson de geste whenever you hear 'narration'. Since it deals with a biography of the character, we think the concept of 'narration' with temporality. However, narration provides a certain event in a broad range. Thus, cartoons presenting one event with the image may have the existence of narration, because description of multiple scenes of narrative comics can be implicitly represented in cartoons. As such implications leave a space, the empty space can be filled by active reasoning of recipients. However, nevertheless, it is very difficult to find studies as well as mentions of narration in cartoons. Thus, in this paper, we investigate the concept and structure of narration and demonstrate the presence of narration in cartoons. First of all, we looked at the narration theory in literature before studying narration in cartoons. The reason is that we thought the approach to the literary theory was required in order to investigate the basic elements, since cartoons are a collection of writing and drawing. We were focused on the prerequisites of narration presented in "story and discourse" of s. Chatman. If the prerequisites of narration are present, we can assume that the narration is present. The prerequisites are 'narration reasoning', 'screening', 'consistency', 'process statements' and 'stasis statement'. As s. Chatman described them as prerequisites of narration, he analyzed the narration structures of films and novels. In addition, we revealed that the narrations were present in cartoons as we identified how prerequisites of narration presented by Chatman were presented and expressed through "vocabulary of comics", "Timeframe" and "life in the line" described in "understanding comics" by Scott McCloud.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.371-377
• /
• 2013

The government has been carrying out a project for supporting the rain shelter for hot pepper as part of measures stabilizing the demand and supply of hot pepper since 2012. However, the eaves height of single-span plastic greenhouses extensively used in farms is low, which are inappropriate for the rainproof cultivation of hot pepper. This study attempted to develop single-span plastic greenhouses which are structurally safe and have the dimensions suitable for the rainproof cultivation of hot pepper as well. The structure status of plastic greenhouses and restructuring wishes of 56 rainproof cultivation farms nationwide were investigated to set up the width and height of the plastic greenhouses. 53% of the plastic greenhouses currently in operation had a width of under 7 m and 64% of their eaves had a height of 1.5 m or less, which accounted for the highest rate. Mostly the width of 7.0 m was desired for the greenhouses and the height of 2.0 m for their eaves, so these values were chosen as the dimensions for the singlespan plastic greenhouses. After an analysis of their structural safety while changing the specifications of the rafter pipe in various ways, 5 kinds of models were suggested considering the frame ratio and installation costs. The 12-Pepper-1 model is a developed single-span plastic greenhouse for hot pepper in which a ${\emptyset}42.2{\times}2.1t$ rafter pipe is installed at an interval of 90cm and the models of 12-Pepper-2 through 5 are the other developed ones in which a ${\emptyset}31.8{\times}1.5t$ rafter pipe is installed at intervals of 60 cm, 70 cm, 80 cm and 90 cm, respectively. As a result of an analysis of economic feasibility of 12-Pepper-2 compared to 10-Single-3 in the notification of the Ministry for Food, Agriculture, Forestry and Fisheries, it turned out that there would be an increase in profits by about 1.2 million won based on one building of a greenhouse sized 672 $m^2$.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.99-111
• /
• 2015

The objectives of this study were to investigate the location, shape, environment, and vegetation of the Village Forest in Gyeonggi-do and to evaluate the ecological integration and changes of the Village Forests to figure out the measures for conservation and management. There were 23 Village Forests remain in Gyeonggi-do. Ten Village Forests were established based on Feng-shui background. Many of them were found in Yongin area and southeast of Icheon. The Village Forests were owned by local community at 9 village and privately owned at 8 villages. Most Village Forests were managed by local communities except for the two managed by private person. Fifty-two percent of the Village Forests were in strip shape, and most of them were established by Feng-shui background or for the prevention of disasters. The average size of the Village Forests was relatively small at 3,046m2. The most frequent tree species found at the Village Forest were Zelkova serrata and Pinus densiflora. Over half of the number of Village Forests showed vertical structure of overstory trees only or overstory-sub overstory combination, which seemed to be resulted from the loss of understory plants by the activities of local residents. The Village Forests that had over 30% of damaged trees were found at 7 villages. The damages were caused by the road construction close to the groves, soil compaction, and tree death by covering lower stem with soil. The vitality of the damaged trees seemed to be significantly low compared to that of the undamaged. There were factors that determined the changes in the Village Forests: community ritual, institutional protection, designation as a water resource protection district, road construction, land use change, windstorm hazards, and development of forest areas. In order to conserve and manage the Village Forests appropriately, it is necessary to limit excessive use of the grove areas and maintain proper tree growing conditions by improving the soil environment. The development of neighborhood areas need to be controlled and community activities should be encouraged to maintain or restore the original landscape of the groves. Protection measures and supporting policies need to be enforced to keep the Village Forests from disappearing in near future.