• 대한수학회보
• /
• 제58권6호
• /
• pp.1507-1520
• /
• 2021

Let R be a commutative ring with 1 ≠ 0, n be a positive integer and M be an R-module. In this paper, we introduce the concept of weakly quasi n-absorbing submodule which is a proper generalization of quasi n-absorbing submodule. We define a proper submodule N of M to be a weakly quasi n-absorbing submodule if whenever a ∈ R and x ∈ M with 0 ≠ aⁿ x ∈ N, then aⁿ ∈ (N :_R M) or a^n-1 x ∈ N. We study the basic properties of this notion and establish several characterizations.

• International Journal of Computer Science & Network Security
• /
• 제22권6호
• /
• pp.91-96
• /
• 2022

The photocatalytic degradation of salicylic acid takes place in several stages involving coupled phenomena, such as the transport of molecules and the chemical reaction. The systems of transport equations and the photocatalytic reaction are numerically solved using COMSOL Mutiphysics (CM) simulation software. CM will make it possible to couple the phenomena of flow, the transport of pollutants (salicylic acid) by convection and diffusion, and the chemical reaction to the catalytic area (bauxite or TiO2 doped by nanoparticles). The simulation of the conversion rate allows to correctly fit the experimental results. The temporal simulation shows that the reaction reaches equilibrium after a transitional stage lasting over one minute. The outcomes of the study highlight the importance of diffusion in the boundary layer and the usefulness of injecting micro-agitation into the microchannel flow. Under such conditions, salicylic acid degrades completely.

• Geomechanics and Engineering
• /
• 제37권4호
• /
• pp.371-382
• /
• 2024

Measurement or prediction of compression index (C_c) of soils is essential for assessment of total and differential settlement of structures. It is a well-known fact that this parameter is controlled by several index identifiers of soil including initial void ratio, Atterberg limits, overconsolidation ratio, specific gravity, etc. Many studies in the past proposed relationships for prediction of C_c based on different index properties. Therefore, this study aims to present a comparison of previously proposed equations for estimation of C_c. Data from literature was compiled, and a total of 90 and 623 test results on remolded and undisturbed specimens were used to question the validity of previously proposed equations. Nevertheless, the modeling ability of 7 and 12 equations for estimation of C_c of remolded and undisturbed soils were questioned by use of compiled data. Moreover, new empirical relationships based on initial void ratio and toughness limit for prediction of C_c was proposed by use of nonlinear multivariable regression and evolutionary based regression analyses. The results are promising-the performances of models established are quite acceptable, which are verified by statistical analyses.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.557-568
• /
• 2019

Accurate modeling of contact interface in bolted joints is crucial in predicting the dynamic behavior for bolted assemblies under external load. This paper presents a contact pressure distribution based non-uniform virtual material method to describe the joint interface of assembly structure, which is connected by sparsely distributed multi-bolts. Firstly, the contact pressure distribution of bolted joints is obtained by the nonlinear static analysis in the finite element software ANSYS. The contact surface around bolt hole is divided into several sub-layers, and contact pressure in each sub-layer is thought to be evenly. Then, considering multi-asperity contact at the micro perspective, the relationship between contact pressure and interfacial virtual material parameters for each sub-layer is established by using the fractal contact theory. Finally, an experimental platform for the dynamic characteristics testing of a beam lap structure with double-bolted joint is constructed to validate the efficiency of proposed method. It is found that the theoretical results are in good agreement with experimental results by impact response in both time- and frequency-domain, and the relative errors of the first four natural frequencies are less than 1%. Furthermore, the presented model is used to examine the effect of rough contact surface on dynamic characteristics of bolted joint.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.684-689
• /
• 2003

One field identified by an inverse method is one of multiple candidate solutions those are independently obtained through a specific estimation technique. While averaging of optimized fields can provide a better description of the spatial feature of an unknown field, it deteriorates the flow and transport characteristics of the optimized fields. As a result, the averaged field is not suited for modeling aquifer performances. Based on genetic algorithm, an optimal field synthesis technique is developed, which combines diversely optimized fields into a refined group of fields. Each field in the population is paired, and a sub-region of each field is exchanged by crossover operation to create a group of synthesized fields of enhanced modeling capability. The population of the fields is evolved till the synthesized fields become sufficiently similar. Applications of the optimal field synthesis to synthetic cases indicate that the objective functions of the fields assessing the modeling capabilities are further reduced after the optimal field synthesis. The identified fields from various inverse techniques may yield a range of modeling results under varied flow situations. The uncertainty is narrowed down through the optimal field synthesis and the associated modeling results converge on that of the reference field. The developed inverse modeling facilitates the construction of a reliable simulation model and hence trustworthy predictions of the future performances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.74.5-74
• /
• 2002

1. Introduction 2. Modeling of Paralleled Converters with ACC 3. H/sub/spl infin//Control 4. Controller Design Example 5. Simulation Result 6. Conclusions

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권6호
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).

• 한국분말재료학회지
• /
• 제31권2호
• /
• pp.119-125
• /
• 2024

The n-type Bi_2-xSb_xTe₃ compounds have been of great interest due to its potential to achieve a high thermoelectric performance, comparable to that of p-type Bi_2-xSb_xTe₃. However, a comprehensive understanding on the thermoelectric properties remains lacking. Here, we investigate the thermoelectric transport properties and band characteristics of n-type Bi_2-xSb_xTe₃ (x = 0.1 - 1.1) based on experimental and theoretical considerations. We find that the higher power factor at lower Sb content results from the optimized balance between the density of state effective mass and nondegenerate mobility. Additionally, a higher carrier concentration at lower x suppresses bipolar conduction, thereby reducing thermal conductivity at elevated temperatures. Consequently, the highest zT of ~ 0.5 is observed at 450 K for x = 0.1 and, according to the single parabolic band model, it could be further improved by ~70 % through carrier concentration tuning.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 춘계학술발표대회논문집
• /
• pp.492-498
• /
• 2003

본 논문에서는 실사와 같은 사실적인 3차원 Facial Model 제작을 위해 해부학 접근을 통한 근육기반의 자연스러운 Facial Modeling 제작을 연구하였다 한국인 기본형 얼굴을 연구 대상으로 선정하여 안면근육 비례를 분석한 후 Multi-patch Surface Modeling 방법을 적용하며 제작하였다. 이 방법에는 통계적 분석기법 중 L/sub 27/(3/sup 13/) 3수준계 직교배열표를 이용하여 검증하였다. 본 연구를 통하여 Facial Model 제작 시 최소의 UV spans 수로 최대 시각화 즉, 원본의 형상을 최대한 유지하면서 작업시간과 Rendering 시간 단축 및 Data 용량을 줄일 수 있는 Modeling 방법을 제안하였고, 향후 자연스런 Facial Animation 제작 및 연구에도 많은 도움이 될 것으로 기대된다.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.235-247
• /
• 2014

Based on two dimensional model partition method proposed in Part 1, Part 2 provides detailed model specification and implementation. To mathematically delineate a model's behaviors and interactions among them, we extend the DEVS (Discrete Event Systems Specification) formalism and newly propose CE-DEVS (Combat Entity-DEVS) for an upper abstraction sub-model of a combat entity model. The proposed CE-DEVS additionally define two sets and one function to reflect essential semantics for the model's behaviors explicitly. These definitions enable us to understand and represent the model's behaviors easily since they eliminate differences of meaning between real-world expressions and model specifications. For model implementation, upper abstraction sub-models are implemented with DEVSim++, while the lower sub-models are realized using the C++ language. With the use of overall modeling techniques proposed in Part 1 and 2, we can conduct constructive simulation and assess factors about combat logics as well as battle field functions of the next-generation combat entity, minimizing additional modeling efforts. From the anti-torpedo warfare experiment, we can gain interesting experimental results regarding engagement situations employing developing weapons and their tactics. Finally, we expect that this work will serve an immediate application for various engagement warfare.