• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.257-262
• /
• 2015

Recently the world wide efforts reduce occurrence of $CO_2$; global warming main reason. The aim of this study is to improve recycling rate of the fly ash (FA) and fused waste slag (FWS) from the power plant and to carbonate under supercritical condition ($40^{\circ}C$, $80kgf/cm^2$ pressure, 60 min) for $CO_2$ fixation. Specimens of mortar with various mixing ratios of FA, FWS (from 100:0 to 20:80 in 5 steps of 20 % reduction each time), distilled water and 3 M NaOH alkali activators were prepared. As a result, the proportion of weight change ratio increases with CaO content, to 12 % after carbonation under the supercritical condition. There is difference of compressive strength between the carbonated and the alkali activator mortar specimens. The stabilization of $CO_2$ fixation through carbonation which could confirm the applicability of the eco-friendly materials without loss of compressive strength.

• Communications for Statistical Applications and Methods
• /
• v.15 no.5
• /
• pp.697-708
• /
• 2008

Operational risk is defined as the risk of loss resulting from inadequate or failed internal processes, people and systems, or external events. The advanced measurement approach proposed by Basel committee uses loss distribution approach(LDA) which quantifies operational loss based on bank's own historical data and measurement system. LDA involves two distribution fittings(frequency and severity) and then generates aggregate loss distribution by employing mathematical convolution. An objective validation for the operational risk measurement is essential because the operational risk measurement allows flexibility and subjective judgement to calculate regulatory capital. However, the methodology to verify the soundness of the operational risk measurement was not fully developed because the internal operational loss data had been extremely sparse and the modeling of extreme tail was very difficult. In this paper, we propose a methodology for the validation of operational risk measurement based on bootstrap confidence intervals of operational VaR(value at risk). We derived two methods to generate confidence intervals of operational VaR.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.1
• /
• pp.40-48
• /
• 2000

1A novel bipolar linear transconductor and its application to operational transconductance amplifier(OTA) for low-voltage low-power signal processing is proposed. The transconductor consists of a npn differential-pair with emitter degeneration resistor and a pnp differential-pair connected to the npn differential-pair in cascade. The bias current of the pnp differential-pair is used with the output current of the npn differential-pair for wide linearity and temperature stability. The OTA consists of the linear transconductor and a translinear current cell followed by three current mirrors. The proposed transconductor has superior linearity and low-voltage low-power characteristics when compared with the conventional transconductor. The experimental results show that the transconductor with transconductance of 50 ${\mu}S$ has a linearity error of less than ${\pm}$0.06% over an input voltage range from -2V to +2V at supply voltage ${\pm}$3V. Power dissipation of the transconductor was 2.44 mW. A prototype OTA with a transconductance of 25 ${\mu}S$ has been built with bipolar transistor array. The linearity of the OTA was same as the proposed transconductor. The OTA circuit also exhibits a transconductance that is linearly dependent on a bias current varying over four decades with a sensitivity of 0.5 S/A.

• Journal of Life Science
• /
• v.12 no.4
• /
• pp.433-441
• /
• 2002

There has been an increasing public concern about environmental safety and human health of field crops while customer consumes more and more field crops, to which overdose and residual chemicals were applied. As a solution for the problems, construction of sustainable agroecosystem is spreading out to pursuit the economic value of agricultural management as well as to meet environment concern. Public has extended their understanding on the preservation of environment and safeness of agricultural products, and governmental policy toward sustainable agriculture drives rapid increase of the production of sustainable agricultural products. Under this circumstances, it is time to encourage more consumption and to activate market system for the sustainable agricultural products. This study was initiated to diagnose the problems and future direction of domestic sustainable agriculture by analyzing the overall opinions of consumer on the sustainable agriculture. The results are as follows: The pursuit of low input management is a prerequisite to creat high valued agricultural products, and serious consideration should be taken to produce clean crops using natural products. Consummers are willing to pay 10∼50% more prices if the products get certified by official eco-label programs. It is believed that practice of sustainable agriculture using biopesticide and natural pesticide would accelerate the rapid extension of this pro-environmental agricultural management. To activate production and consumption of sustainable agricultural products correct informations on safety should be addressed to customer, and confidence has to be brought about from customer. This could be done by obtaining various and efficient distribution route, product competency for quality, upgraded sales strategy, maximum utilization of certificate system, and practice of recall system, so on.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.99-105
• /
• 2014

$LiCoO_2$ thin film have received attention as cathodes of thin-film microbatteries. In this study, $LiCoO_2$ thin films were synthesized on Au substrates by sol-gel spin coating method and electrochemical properties were investigated under annealing temperature and time. The phycochemical properties of $LiCoO_2$ thin film were investigated by X-ray diffraction, scaning electron microscopy and atomic force microscopy. The electrochemical properties were characterized using galvanostatic charging/discharging cycling tests. From X-ray diffraction, as-grown films annealed at $550^{\circ}C$ and $750^{\circ}C$ are presumed to be spinel structure and a single phase of the layered-rock-salt, respectively. The RMS roughness and grain size of the films which annealed at $750^{\circ}C$ has similar values for annealing time 10 and 30 min, while for annealing time 120 min surface roughness, grain size increase and pore appearance were observed. The first discharge capacity of $LiCoO_2$ thin films annealed at $750^{\circ}C$ for 10, 30 and 120 min is about 54.5, 56.8 and $51.87{\mu}Ah/cm^2{\mu}m$, respectively. Corresponding capacity retention at 50th cycle is 97.25, 76.69, 77.19%.

• Journal of Acupuncture Research
• /
• v.29 no.4
• /
• pp.7-18
• /
• 2012

Objectives : The purpose of this study is to evaluate the effects of Miso facial acupuncture on facial reduction and improvement of skin condition. Methods : From March to May 2012, 20 women in their twenties to forties with no facial diseases were recruited. Miso facial acupuncture was performed on the both side of their face twice a week, total seven times. The 3D face photographs of each participant were checked 5 times ; before treatment, after 1st treatment, 4th treatment, 7th treatment and 10 days from the last treatment using RS-400FL(Morpheus Co. Korea) and REAL FACE. The surface distances of the 4 lines on the face were measured using Renai MEF program. The improvement of skin condition was evaluated by water content, trans epidermal water loss(TEWL), erythema index and melanin index using MPA 5. They were checked 4 times ; before treatment, 4th treatment, 7th treatment and after 10 days from the last treatment. We analyzed data using Paired t-test(p<0.05) and Wilcoxon signed rank test(p<0.05). Results : One case was dropped out due to pain and edema after 4th treatment. The surface distances of the 4 lines on face were significantly reduced and maintained after 10 days from last treatment. Water content was significantly increased and maintained after 10 days from last treatment. TEWL was significantly decreased. Erythema index was significantly decreased from the 3rd evaluations. Melanin index was slight decreased with no significance at the 2nd evaluations. Conclusions : These results show that Miso facial acupuncture can reduce sizes of the face and improve skin condition such as water content, TEWL and erythema index except melanin index.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.51-63
• /
• 2005

Concrete pavement may suffer from material deterioration or structural problems, which lead to surface cracks and deflection of a concrete pavement. Degraded concrete pavement, when it is still under operation, should be recovered by an urgent maintenance to avoid the discontinued service leading to the significant traffic problems and economic loss. Seismic techniques are good tools to assess the structural integrity of concrete runway. It is because seismic techniques can evaluate engineering properties nondestructively and quickly and the evaluation can be extended to subgrade. In this study, a series of numerical simulations of stress-wave propagation were performed to verify feasibility of seismic techniques as an assessment tool. Based on the results of the numerical simulation, a framework of using seismic techniques was presented fur the nondestructive integrated assessment fur structural integrity of concrete runway. And the presented framework was applied to $\bigcirc\bigcirc$ concrete runway with surface cracks, which required urgent maintenance, to identify the causes of the surface cracks. The results obtained from the structural integrity assessment were compared with the measurements of the cores collected from the same runway for verification of the presented framework.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.115-122
• /
• 2018

In this paper, the feasibility of recycling concrete waste as a method to reduce final disposal amount of wastes generated through decommissioning of nuclear power plant has been analyzed based on experimental results of existing literature. When recycled concrete waste was used as recycled aggregate, it was investigated through literature that the concrete strength decreased by 30~40% depending on the mixing ratio. It was also investigated that concrete with recycled aggregate can be used as a structural material when the quality of recycled aggregate is well managed since no significant problem was found. When recycled cement produced from concrete waste was used, the strength of concrete or mortar decreased considerably as the recycled cement content increased. Therefore, it can be concluded that concrete or mortar with recycled cement can be used as a filling material for final disposal of large radioactive waste rather than for structural use. This paper is expected to be useful for reduction on disposal volume and decommissioning cost for nuclear power plants such as Kori 1.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.229-237
• /
• 2011

The pullout test is a nondestructive testing method certified by the American Society for Testing and Materials (ASTM) and British Standards (BS). Research has shown that it is very reliable in terms of evaluating the concrete strength of reinforced concrete members. However, the pullout test is rarely performed on domestic construction sites due to the complex procedures and high costs involved. This study proposes a new pullout test composed of a post installable break-off bolt, an insert nut, and a pullout tester, which satisfy both economical and practical purposes on a construction site. Three different types of special fastening methods, a temporary fixed bolt, a plastic fixed panel, and a fixed bar, have been developed. A pullout tester is proposed that is driven by the circle force introduced into a handle composed of eight gears without a load cell and a hydraulic cylinder. The serviceability and reliability of these instruments were investigated through experiments at construction sites. Furthermore, the sample pullout test with a wall specimen was conducted to estimate the usefulness of the temporary fixed bolt type of fastening methods and pullout devices. Eventually, the developed instruments will be useful on construction sites if minor requirements are met.