• Korea journal of population studies
• /
• v.23 no.2
• /
• pp.79-112
• /
• 2000

This study was focused on the contrasting pattern of part-time employment between Japan and Taiwan where the environments are similar in terms of expanding service industries and increasing flexibility of labor. In Japan, the expansion of part-time employment and its feminization have occurred, whereas they have not at all in Taiwan. The purpose of this study was to examine the reasons behind this phenomena, and to explore what relations they might have with the supply of women\`s labor in each country. Data analysis showed the following results. First, when the phenomena of part-time employment in Japan and Taiwan are summarized as \`active\` and \`inactive\` models, the difference could be explained by a structure-oriented approach rather than an individual-oriented approach. In other words, the difference between the two countries is mainly because of the structural characteristics of the labor market. a combination of capitalism and patriarchy, and an effect of state welfare and family policies rather than a \`voluntaristic choice\` due tn household work and child rearing. In light of this. the labor market segmentation and flexibility of labor theory in particular provided a useful frame for explanation. Second, with regard to the supply of women\`s labor, the difference between Japan and Taiwan could be found in the structure of the labor market and in family response strategies. The large corporation-oriented and strictly divided labor market structure in Japan activated part-time employment and its feminization, whereas, the small family-oriented businesses and less divided labor market in Taiwan supported the continuity of full-time employment of married women. There was also a room for informal employment in Taiwan which made part-time employment unnecessary. This study showed that even within similar environments of expanding service industry and pursuing flexibility of labor different measures and adaptations were possible. The case of Taiwan in particular, showed the significance of an informal labor market which was a part of industrialization process and a strategy of producing various products through a subcontracting network.

• Journal of Korean Biological Nursing Science
• /
• v.1 no.1
• /
• pp.1-24
• /
• 1999

The purpose of this study was to define the content of requisite human structure and function knowledge needed for clinical knowledge of nursing practice. Subjects of human structure and function were divided into 10 units, and each unit was further divided into 21 subunits, resulting in a total of 90 items. Contents of knowledge of human structure and function were constructed from syllabus of basic nursing subjects in 4 college of nursing, and textbooks published by nurse scholars prepared with basic nursing sciences. The degree of need of 90 items was measured with a 4 point scale. The subjects of this study were college graduated 136 nurses from seven university hospitals in Seoul and three university hospitals located in Chonnam Province, Kyungbook Province, and Inchon. They have been working at internal medicine ward, surgical ward, intensive care unit, obstetrics and gynecology ward, pediatrics ward, opthalmology ward, ear, nose, and throat ward, emergency room, rehabilitation ward, cancer ward, hospice ward, and their working period was mostly under 5 years. The results were as follows: 1. The highest scored items of human structure and function knowledge necessary for nursing practice were electrolyte balance, blood clotting mechanism and anticoagulation mechanism, hematopoietic function, body fluid balance, function of plasma, and anatomical terminology in the order of importance. The lowest scored items of human structure and function knowledge necessary for nursing practice was sexual factors of genetic mutation. 2. The highest order of need according to unit was membrane transport in the living unit, anatomical terminology in movement and exercise unit, mechanism of hormone function in regulation and integration unit, component and function of blood in oxygenation function unit, structure and function of digestive system in digestive and energy metabolism unit, temperature regulation in temperature regulation unit electrolyte balance in body fluid and electrolyte unit, concept of immunity in body resistance unit, and genetics terminology in genetics unit. The highest order of importance according to subunit was membrane transportation in cell subunit, classification of tissues in tissue unit, function of skin and skin in skin subunit, anatomical derivatives of the skeleton subunit, classification of joints in joint subunit, an effect of exercise on muscles in muscle subunit, function of brain in nervous system subunit, special sense in sensory subunit mechanism of hormone function in endocrine subunit, structure and function of female reproductive system in reproductive system unit, structure and function of blood in blood unit, structure of heart, electrical and mechanical function in cardiovascular system unit, structure of respiratory system in respiratory system subunit, structure and function of digestive system in digestive system subunit, hormonal regulation of metabolism in nutrition and metabolism subunit, function of kidney in urologic system subunit, electolyte balance in body fluid, electolyte and acid-base balance subunit. 3. The common content of human structure and function knowledge need for all clinical areas in nursing was structure and function of blood, hematopoietic function, function of plasm, coagulation mechanism and anticoagulation mechanism, body fluid, electrolyte balance, and acid-base balance. However, the degree of need of each human structure and function knowledge was different depending on clinical areas. 4. Significant differences in human structure and function knowledge necessary for nursing practice such as skin and derivatives of the skin, growth and development of bone, classification of joint, classification of muscle, structure of muscle, function of muscle, function of spinal cord, peripheral nerve, structure and function of pancrease, component and function of blood, function of plasma, structure and function of blood, hemodynamics, respiratory dynamics, gas transport, regulation of respiration, chemical digestion of foods, absorption of foods, characteristics of nutrients, metabolism and hormonal regulation, body energy balance were demonstrated according to the duration of work. 5. Significant differences in human structure and function knowledge necessary for nursing practice such as classification of tissue, classification of muscles, function of muscles, muscle metabolism, classification of skeletal muscles, classification of nervous system, neurotransmitters, mechanism of hormone function, pituitary and pituitary hormone, structure and function of male reproductive organ, structure and function of female reproductive organ, component and function of blood, function of plasma, coagulation mechanism and anticoagulation mechanism, gas exchange, gas transport, regulation of respiration, characteristics of nutrients, energy balance, function of kidney, concept of immunity, classification and function of immunity were shown according to the work area. Based on these findings, all the 90 items constructed by Korean Academic Society of Basic Nursing Science should be included as contents of human structure and function knowledge.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• The Journal of Korean Physical Therapy
• /
• v.8 no.1
• /
• pp.21-32
• /
• 1996

This study was conducted in an attempt to grasp the health problems and environmental situation of the farmers and their vinyl houses. The study was done between Aug. 10, 1995 and Sep. 10, 1995, for one month period. with two hundred and nine vinyl house cultivation farmers chosen at random as subjects in five areas in and around Kim Chun City. The following are the results of the study carried out through direct interviews and surveys with the subjects : 1. The career of farming on vinyl house facilities by sex(male vs female) averages 17.29 and 15.08 years is shorter than that of general farmer's average of 31.24 and 25.58 years(P<0.05). Hours of labor between the two are silimar : monthly labor hours for vinyl house farmers are average 28 and 27.52 days. longer than the general farmers' average of 26.57 and 25.95 hours respectively. 2. The comp aints of physical symptoms among the vinyl house farmers range from lumbago, shoulder pain dullness in the limbs and dizziness, which show no remarkable differences from those of general farmers. 3. The frequency of application of chemicals on vinyl house forming for a period of one year averages 23.79, three times as often as the general farmer's average or 8.36(P<0.05). In the addiction rate of chemicals, too, the vinyl house farmer stowed a higher percentage of $9.09\%$ over the general farmer's $1.24\%$(P<0.01). 4. In temperature, humidity and disconfort indices of in and outside of the vinyl house, room temperature is on an average $34.6{\pm}5.05^{\circ}C,\;11.7^{\circ}C$ higher than that of outside, while in humidity inside was lower than outside by $10.6\%$ point, $65.9\%$ over $76.5\%$. The discomfort index was higher inside by $83{\pm}4.61\;vs\;70.64{\pm}5.61$. 5. The status of physical treatment over the past one year shows : for vinyl house farmers-physiotheraphy$(43.06\%)$, pharmacy$(24.04\%)$, clinic(18.66%), herbal medicine(574%) : for general farmers-pharmacy$(34.16\%)$, Physiotherapy$(27.33\%)$, Clinic$(18.63\%)$, Folk Medicine$(11.18\%)$ (P<0.01).

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.54-59
• /
• 1999

This study was based on a series of 164 patients with zygomatic bone fracture treated at Department of Oral and Maxillofacial Surgery of Chonnam University Hospital from January 1992 to December 1996. The male-to-female ratio was 7:1. Their ages ranged from 8 to 78 years, with a median age of 35.6 years. The age frequency was highest in the second decade (30.5%), and third decade (23.8%), fifth decade (16.5%) in orders. The monthly distrbution of incidence showed October to be the month in which the greatest percentage occured (14.0%). The major cause of zygomatic bone fracture was alleged traffic accidents (53.7%). The incidence of concomitant facial bone fractures was 69,5%, and maxilla fracture (52.4%) was most frequently combined. The admission route was through emergency room (72.3%) and through outpatient department (26.8%). The incidence of associated injuries was 37.2%. The intraoral approach was the major method of treatment in zygomatic bone fracture (57.1%). The most frequent type of zygoma fracture was class IV (33.5%), and class III (25.6%) was next in order of frequency. Complications were enophthalmos (7.3%), facial asymmetry (6.7%), paresthesia (6.1%), and diplopia (2.4%) These results suggest that correct diagnosis and treatment of severity of fracture, concomitant fracture, and associated injuries are necessary, and co-operative treatment with medical department should be performed to reduce postoperative complication.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.73-94
• /
• 2010

The attending system is a medical system that allows doctors in clinics to use the extra equipment in hospitals-beds, laboratory, operating room, etc-for their patient's care under a contract between the doctors and hospitals. Therefore, the system is very beneficial in terms of the efficiency of the usage of medical resources. However, it is necessary to develop a strong support system to strengthen its weaknesses and supplement its merits. If doctors use hospital beds under the attending system of hospitals, they would be able to check a patient's condition often and provide them with nursing care services. However, the current attending system lacks delivery and assistance support. Thus, for the successful performance of the attending system, a networking system should be developed to facilitate communication between the doctors and nurses. In particular, the nursing records in the attending system could help doctors monitor the patient's condition and provision of nursing care services. A nursing record is the formal documentation associated with nursing care. It is merely a data repository that helps nurses to track their activities; nursing records thus represent a resource of primary information that can be reused. In order to maximize their usefulness, nursing records have been introduced as part of computerized patient records. However, nursing records are internal data that are not disclosed by hospitals. Moreover, the lack of standardization of the record list makes it difficult to share nursing records. Under the attending system, nurses would want to minimize the amount of effort they have to put in for the maintenance of additional records. Hence, they would try to maintain the current level of nursing records in the form of record lists and record attributes, while doctors would require more detailed and real-time information about their patients in order to monitor their condition. Therefore, this study developed a system for assisting in the maintenance and sharing of the nursing records under the attending system. In contrast to previous research on the functionality of computer-based nursing records, we have emphasized the practical usefulness of nursing records from the viewpoint of the actual implementation of the attending system. We suggested that nurses could design a nursing record dictionary for their convenience, and that doctors and nurses could confirm the definitions that they looked up in the dictionary through negotiations with intelligent agents. Such an agent-based system could facilitate networking among medical institutes. Multi-agent systems are a widely accepted paradigm for the distribution and sharing of computation workloads in the scientific community. Agent-based systems have been developed with differences in functional cooperation, coordination, and negotiation. To increase such communication, a framework for a multi-agent based system is proposed in this study. The agent-based approach is useful for developing a system that promotes trade-offs between transactions involving multiple attributes. A brief summary of our contributions follows. First, we propose an efficient and accurate utility representation and acquisition mechanism based on a preference scale while minimizing user interactions with the agent. Trade-offs between various transaction attributes can also be easily computed. Second, by providing a multi-attribute negotiation framework based on the attribute utility evaluation mechanism, we allow both the doctors in charge and nurses to negotiate over various transaction attributes in the nursing record lists that are defined by the latter. Third, we have designed the architecture of the nursing record management server and a system of agents that provides support to the doctors and nurses with regard to the framework and mechanisms proposed above. A formal protocol has also been developed to create and control the communication required for negotiations. We verified the realization of the system by developing a web-based prototype. The system was implemented using ASP and IIS5.1.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.2
• /
• pp.52-64
• /
• 2014

I the recent years, Seoul, Daejeon, Changwon, and Suncheon have started to strengthen P.R. efforts on eco-brands produced by the city and to publicize as a specialized tourist city in an attempt to change their identity and image. However, there is actually a question whether the efforts of the local governments have any direct impact on satisfaction with urban living environments and the attractions of the city. The purpose of this study was to examine the awareness of residents and visitors about the attractions of Suncheon City as an eco-city and to discuss the planning criteria for the eco-city brand building and its management. The research data was collected in Suncheon City and main results of this study are as follows. The residents and the visitors investigated were satisfied with the environmental friendliness of this city and regarded it as an eco-city. As a result of asking them why they viewed the city as an eco-city, many of the residents cited diverse green tracts of land as the reason, whereas the visitors replied they were satisfied with the state of marshy areas preserved by the city. The psychological factors related to the satisfaction of the eco-city by the residents were composed of four factors, 'cultural factor', 'urban infrastructure factor', 'ecological factor' and 'scenery factor'. The visitors were composed of five factors, 'cultural factor', 'urban infrastructure factor', 'ecological factor', 'scenery factor' and 'amenity factor'. Out of the factors, the cultural factor and the urban infrastructure factor were found to exert the largest influence on the overall satisfaction of the residents and the visitors. The ISA(Importance-Satisfaction Analysis) was made, the residents and the visitors gave top priority to 'diversity of natural attractions', 'pleasant season and weather', 'beautiful scenery', 'diversity of rare animals and plants', 'diversity of parks', 'green areas and streets', 'broad ecological area' and 'the preservation of marshy areas' among the attractions of the eco-city. They placed importance on the activation of green traffic and walking environments as well, but they weren't satisfied with the state of the two in the city. Therefore there was much room for improvement in that regard.

• Applied Microscopy
• /
• v.39 no.3
• /
• pp.205-218
• /
• 2009

This experiment was performed to evaluate the morphological responses of the gastric epithelial cells of the mouse, inoculated with Ehrlich carcinoma cells in the inguinal area, following administration of BCG. Healthy adult ICR mice weighing 25 gm each were divided into normal and experimental groups (tumor control group and BCG-treated group). In the experimental groups, each mouse was inoculated with $1{\times}10^7$ Ehrlich carcinoma cells subcutaneously in the inguinal area. From next day after inoculations, 0.2 mL of saline or BCG (0.5 mL/25 g B.W.: $0.03{\times}10^8{\sim}0.32{\times}10^8$ CFU) were injected subcutaneously to the animals every other day, respectively. The day following the 7th injection of saline or BCG, each mouse was injected with a single dose of 0.7 ${\mu}Ci/g$ of methyl-$^3H$-thymidine (25 Ci/mmol, Amersham Lab., England) through tail vein. Seventy minutes after the thymidine injection, animals were sacrificed, and gastric tissues were taken and fixed in 10% neutral formalin. Deparaffinized sections were coated with autoradiographic emulsion EM-1 (Amersham Lab., England) in a dark room. The number of labeled epithelial cells in the gastric mucosae (mean number of labeled epithelial cells per 3.5 mm length of mucosa) were observed and calculated. And for electron microscopic observation, gastric tissues were prefixed with 2.5% glutaraldehyde-1.5% paraformaldehyde solution, followed by post-fixation with 1% osmium tetroxide solution. On the light microscopic study, gastric mucosae had no morphological changes following the injection of BCG. On the electron microscopic study, in the BCG-treated mice, myelin figures and multivesicular bodies within the gastric epithelial cells were observed more frequently than in those of the normal control ones. On the autoradiographic study, number of the labeled cells of normal control, tumor control and BCG-treated mice were 380.2 (${\pm}31.35$), 426.1 (${\pm}28.43$) and 301.8 (${\pm}34.63$), respectively. In the BCG-treated mice, poorly-labeled cells containing only a few silver grains of 3H-thymidine were observed more frequently as compared in those of the normal control and tumor control ones. From the above results, BCG may suppress the DNA synthesis of the gastric epithelial cells, but does not results severe fine structural defect on the gastric epithelial cells. These results suggest that BCG is expected as one of the effective supplemental anticancer drugs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.77-87
• /
• 1991

The purpose of this study were to investigate the bed climate and the physiological responses in sleep on the traditional Korean floor heating system called Ondol. Ondol has been the most widely used heating system in Korea, yet there has been a no systematic studies examined its environmental effects on human body. Experimental room was constructed to match the typical thermal environment of Ondol. (floor surface temperature; $32\~33^{\circ}C$, air temperature; $22.5{\pm}1.0^{\circ}C$, relative humidity; $64.0{\pm}4.0\%$RH, air velocity; 0.25 m/sec.) Three different combinations of bedclothes were chosen for the experiment based on the study results showing that they were the most widely used types in Korea. Type 1 was the combination of a cotton-padded mattress with a cotton-padded Korean style blanket. Type 2 was a cotton-padded mattress with a cotton-guilted Korean style blanket. Type 3 was a cotton-padded matless with a polyacryl blanket. Thermal resistance of each of these combina-tions in the bedclothes was measured using thermal manikin. Two adult female was chosen for the seven hour sleeping experiment which was known to be the average sleeping hours of Korean adult female. The bed climate was measured with the temperature under the mattress, the surface temper-ature of the mattress, and the air temperature and the relative humidity of the space between the mattress and blanket. The skin temperature, rectal temperature of the subjects and the bed climate were measured eight times, one hour before the experiment and every hour during the experiment. The weight loss and the subjective sensation were measured for the each subjects before and after the experiment. The procedure was repeated twice with two subjects and three types of bedclothes, yielding twelve combinations of results. The results were as follows; 1. With the surface temperature of $32\~33^{\circ}C$ of Ondol, air temperature was $22.5{\pm}1.0^{\circ}C$ with $64.0{\pm}4.0\%$ RH. The bed climates were $39.2{\pm}40.8^{\circ}C$ under the mattress, $35.3\~36.2^{\circ}C$ on the mattress, and $26.9\~32.0^{\circ}C$ with $56.0\~71.3\%$ RH between the mattress and the blanket. 2. Mean skim temperature during sleep was 34.2"C with local skin temperature of $34.0\~35.5^{\circ}C$. The skin temperatures of abdomen, thigh, foot were higher than the other parts of the body. 3. The skin temperature of chest, thigh, leg and back varied significantly according to the combinations of bedclothes. With the cotton-padded blanket, the skin temperature was the highest, while with the cotton-guilted blanket showed lowest. 4. Examining the relationship between the mean skin temperature and the local skin temper-ature, the chest temperature showed the highest correlation with the former. Therefore, the chest temperature can be recommended to represent the skin temperature in measuring the bed climate. 5. The subjective bed climates were $39.0\~40.4^{\circ}C$ under the mattress, $35.2\~35.9^{\circ}C$ on the mattress, $29.8\~31.6^{\circ}C$ with $56.8\~68.4\%$ RH between the mattress and blanket. In sum, from this experiment we not only obtained the reliable value of bed climates on Ondol, but also showed that the bed climates and the physiological responses were affected differently according to the materials of bed clothes.