• 한국통신학회논문지
• /
• 제27권4A호
• /
• pp.345-355
• /
• 2002

본 논문에서는 지문영상의 향상을 위한 방향성 필터링의 새로운 기법을 제안한다. 지문영상은 융선의 규칙적인 열의 방향성 맵으로 구성되어 있으며, 융선의 주방향성은 지문영상의 주요 특징점을 추출하기 위한 융선의 연결이나 잡음의 제거 등 지문영상의 전처리과정에 매우 중요하다. 방향성대역 통과 필터뱅크(Directional Filter Bank ; FB)는 입력영상을 주파수의 성분이 아닌 방향성 성분으로 분해한 다음, 이 대역영상으로부터 원영상을 완전하게 복원하는 필터이다. 본 논문은 DFB를 이용하여 지문영상을 방향성 대역 영상으로 분해하여 이를 처리한 후 복원함으로써 지문영상을 향상시키는 알고리듬을 제안한다.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1037-1043
• /
• 2006

We report the enhancement of hole injection using ozone-treated Ag nanodots dispersed on indium tin oxide anode in $Ir(ppy)_3-doped$ phosphorescent OLED. Phosphorescent OLED fabricated on Ag nanodots dispersed ITO anode showed a lower turn on voltage and higher luminescence than those of OLEDS prepared commercial ITO anode. Synchrotron x-ray scattering examination results showed that the Ag nanodots dispersed on ITO anode is amorphous structure due to low deposition temperature. It was thought that decrease of the energy barrier height as Ag nanodots changed to $AgO_x$ nanodots by surface treatment using ozone for 10 min led to enhancement of hole injection in phosphorescent OLED. Futhermore, efficient hole injection can be explained by increase of contact region between anode material and organic material through introduction of $Ag_2O$ nanodots.

• 방송공학회논문지
• /
• 제24권3호
• /
• pp.420-429
• /
• 2019

최근 CNN (Convolutional Neural Network) 기반의 화질 개선 기술이 H.265/HEVC와 같은 블록 기반 영상 압축 표준을 사용하여 압축된 영상의 화질을 향상시키는 데 적극적으로 사용되어 왔다. 이 논문은 이러한 영상 압축 기술을 위한 화질 개선 연구의 추세를 요약하고 분석하는 것을 목표로 한다. 먼저, 화질 개선을 위한 CNN의 구성 요소를 살펴보고 이미지 도메인에서의 사전 연구를 요약한다. 다음으로 네트워크 구조, 데이터셋 및 학습 방법의 세 가지 측면에서 관련 연구들을 정리하고 성능 비교를 위한 구현 및 실험결과를 제시하고자 한다.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.87-100
• /
• 2022

Limiting the displacement of seismic isolators causes a pounding phenomenon under severe earthquakes. Therefore, the ASCE 7-16 has provided minimum criteria for the design of the isolated building. In this research the seismic response of isolated buildings by Triple Friction Pendulum Isolator (TFPI) under the impact, expected, and unexpected mass eccentricity was evaluated. Also, the effect of different design parameters on the seismic behavior of structural and nonstructural elements was found. For this, a special steel moment frame structure with a surrounding moat wall was designed according to the criteria, by considering different response modification coefficients (RI), and 20% mass eccentricity in one direction. Then, different values of these parameters and the damping of the base isolation were evaluated. The results show that the structural elements have acceptable behavior after impact, but the nonstructural components are placed in a moderate damage range after impact and the used improved methods could not ameliorate the level of damage. The reduction in the RI and the enhancement of the isolator's damping are beneficial up to a certain point for improving the seismic response after impact. The moat wall reduces torque and maximum absolute acceleration (MAA) due to unexpected enhancement of mass eccentricity. However, drifts of some stories increase. Also, the difference between the response of story drift by expected and unexpected mass eccentricity is less. This indicates that the minimum requirement displacement according to ASCE 7-16 criteria lead to acceptable results under the unexpected enhancement of mass eccentricity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.376-379
• /
• 1996

Synthesis for qualitative analysis in connection with quantitative analysis from the pinch design method, EVOP and Operations Research is proposed for the optimal synthesis of heat exchanger networks, that is through of the transportation model of the linear programming for synthesizing chemical processing systems, to determine the location of pinch points, the stream matches and the corresponding heat flowrate exchanged at each match. In the second place, according to the optimization, the optimal design of heat transfer enhancement is carried on a fixed optimum heat exchanger network structure, in which this design determines optimal operational parameters and the chosen type of heat exchangers as well. Finally, the method of this paper is applied to the study of the optimal synthetic design of heat exchanger network of constant-decompress distillation plants.

• 열처리공학회지
• /
• 제31권3호
• /
• pp.97-103
• /
• 2018

The objective of this study is to develop the mechanical properties of AlSiCu aluminum alloy by the two-step solution heat treatment. The microstructure of gravity casting specimen represents a typical dendrite structure having a secondary dendrite arm spacing (SDAS) of 40 mm. In addition to the Al matrix, a large amount of coarsen eutectic Si phase, $Al_2Cu$ intermetallic phase, and Fe-rich phases are generated. The eutectic Si phases are fragmented and globularized with solution heat treatment. Also, the $Al_2Cu$ intermetallic phase is resolutionized into the Al matrix. The $2^{nd}$ solution temperature at $525^{\circ}C$ might be a optimum condition for enhancement of mechanical properties of AlSiCu aluminum alloy.

• 영어어문교육
• /
• 제9권spc호
• /
• pp.99-112
• /
• 2003

This study investigated how different types of formal instruction affect the second language looming of English grammatical structure among Korean high-school students. The linguistic focus of the study was English present perfect, which often creates learning problems for Korean learners of English. Subjects were divided into a control group and an experimental group (Enhanced group). The input the subjects in the experimental group received was manipulated by visually enhancing (with highlighting of the target structures in a reading text). Learners' awareness of the rules throughout the treatment period, as well as accuracy of target structures was measured. Results indicated that subjects in the Enhanced group showed higher performance than the control group. Further, awareness of rules that learners developed over the treatment period did not provide any advantage in learning.

• 한국자기공명학회논문지
• /
• 제18권1호
• /
• pp.1-4
• /
• 2014

It is generally understood that protein-protein interactions proceed via transient encounter complexes that rapidly evolve into the functional stereospecific complex. Direct detection and characterization of the encounter complexes, however, been difficult due to their low population and short lifetimes. Recent application of NMR paramagnetic relaxation enhancement first visualized the structures of the encounter complex ensemble, and allowed the characterization of their physicochemical properties. Further, rational protein mutations that perturbed the encounter complex formation provided a clue to the target search pathway during protein-protein association. Understanding the structure and dynamics of encounter complexes will provide useful information on the mechanism of protein association.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권2호
• /
• pp.51-60
• /
• 2005

In this paper, we design the GA-fuzzy precompensator of a Power System Stabilizer for Thyristor Controlled Series Capacitor(TCSC-PSS) for enhancement of power system stability. Here a fuzzy precompensator is designed as a fuzzy logic-based precompensation approach for TCSC-PSS. This scheme is easily implemented by adding a fuzzy precompensator to an existing TCSC-PSS. And we optimize the fuzzy precompensator with a genetic algorithm for complements the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership function and control rules. Nonlinear simulation results show that the proposed control technique is superior to conventional TCSC-PSS in dynamic responses over the wide range of operating conditions and in convinced robust and reliable in view of structure.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.28-32
• /
• 2009

The correlation between the optical performance of the reflective polarizer, which is a key optical component for the brightness enhancement of the liquid crystal display (LCD), and the configuration of optical sheets was investigated in a direct-lit CCFL (cold-cathode fluorescent lamp) backlight. The optical gain of the reflective polarizer, the polarization state of the light emitted from each film, and the loss factor for the polarization conversion process occurring in the lower part of the backlight were determined using a phenomenological approach for the polarization recycling process. The present study suggests that the correlation between the optical performance of the brightness enhancement films and the backlight configuration should be carefully considered in the optimization of the backlight structure.