• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.149-157
• /
• 2003

The purpose of this paper is to quantitatively investigate aging state of epoxy coating on containment structure at nuclear power plant. In order to evaluate an physical bonding of the epoxy coating, adhesion test was performed on a degraded epoxy coating on concrete specimens fabricated by accelerated aging experiment. In addition, impedance data by ultrasonic test were measured to compare with adhesion data. From almost 50 % of the specimens, aging phenomena of epoxy coating such as pin hole, blistering was discovered. To improve reliability on quality degradation of epoxy, co-relation between two kinds of different data was analyzed. By tracing co-related these data, it was possible to figure out physical state of as-built epoxy coating. The possibility to develop new methodology of time - dependent aging state on epoxy coating was found and discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3842-3855
• /
• 2018

A novel image completion method is proposed that uses the advantage of planar structural information to fill corrupted portions of an image. First, in estimating parameters of the projection plane, the image is divided into several planes, and their planar structural information is analyzed. Second, in calculating the a priori probability of patch and patch offset regularity, this information is converted into a constraint condition to guide the process of filling the hole. Experimental results show that the proposed algorithm is fast and effective, and ensures the structure continuity of the damaged region and smoothness of the texture.

• 항공우주기술
• /
• 제5권2호
• /
• pp.8-15
• /
• 2006

본보고서는 스마트무인기의 후방동체 구조물에 대하여 구조 해석한 결과를 기술하였다. 후방 동체는 수직 및 수평미익의 하중을 전달하여야 하므로 충분한 강도와 강성을 가질 것이 요구되며 엔진배기구가 지나가므로 동체에 큰 구멍이 생기게 된다. 또한 고온 부분에 노출되는 부분이 있으므로 이로 인한 추가 강도 저하에 대비하는 것이 필요하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.357-357
• /
• 2010

Using ab initio density functional theory, we study the structural and electronic properties of interface between Cu surface and highly electron withdrawing hexaazatriphenylene-hexanitrile (HAT-CN) known as an efficient hole injection layer for organic light emitting diodes (OLEDs). We calculate the equilibrium geometries of the interface with different HAT-CN coverages. Usually, some of C-N bonds located at the edge of the HAT-CN molecule are deformed toward Cu atoms resulting in the reconstruction of Cu surface. By analyzing the electron charge and the potential distributions over the interface, we observe the formation of surface dipoles, which modify the work function at the interface. Such dipole formation is attributed to two origins, one of which is a geometrical nature and the other is a bond dipole. The former is related to structural deformation mentioned above, whereas the latter is due to charge transfer between organic and metal surface.

• Structural Engineering and Mechanics
• /
• 제84권4호
• /
• pp.453-464
• /
• 2022

Thin plates are the most common spatially stressed members in engineering structures that bear out-of-plane loads. Therefore, it is of great significance to study the deformation performance characteristics of thin plates for structural design. By constructing 12 basic displacement and deformation basis vectors of the four-node square thin plate element, a deformation decomposition method based on the complete orthogonal mechanical basis matrix is proposed in this paper. Based on the deformation decomposition method, the deformation properties of the thin plate can be quantitatively analyzed, and the areas dominated by each basic deformation can be visualized. In addition, the method can not only obtain more deformation information of the structure, but also identify macroscopic basic deformations, such as bending, shear and warping deformations. Finally, the deformation properties of the bidirectional thin plates with different sizes of central holes are analyzed, and the changing rules are obtained.

• Asia pacific journal of information systems
• /
• 제32권1호
• /
• pp.168-190
• /
• 2022

This review aims to synthesize social network theories by drawing on the importance of social network perspectives in understanding knowledge management with technology in organizations. I provide an overview of prior social network research with the following core ideas: the primacy of relations between organizational actors, the utility of actors' embeddedness in social fields, the social utility of network connections, and the structural patterning of social life. On top of that, I summarize critical social perspectives (the social capital theory, the structural hole theory, the embeddedness perspective, the social exchange theory, the organizational learning theory, and the innovation diffusion theory) to suggest potential research questions for future studies in social network research in the knowledge management discipline.

• 지식경영연구
• /
• 제13권4호
• /
• pp.71-82
• /
• 2012

The purpose of this study is to investigate the effects of employees who attend graduate school on the expansion of the knowledge sharing network in their company. For this purpose, the researchers chose 10 worker-graduate students and 75 members of company 'A' that they belong to and 107 members of university 'B' that they belong to, 172 members in total. 10 overlapped employee-students were excluded. The results of this study are summarized as follow: First, the personal relations of the employee-students enhanced after they have entered the graduate school. The score for the question was 3.85 out of 5 points. Second, the employee-students played the role of the knowledge bridge between company's co-worker network and graduate school's classmate network. It was confirmed that the density of the company's network was higher than the density of the connected network of the company and the graduate school. The analysis result confirmed that the difference of the two groups was significant. This means that the company carried out exchange with more members and therefore gained various kinds of knowledge. Also, in all types of network, the structural hole of the company network was lower than that of the connected network of the company and graduate school. The ANOVA test using QAP procedure confirmed that the difference of two groups was significant (friendship network F=1.2856, p<0.05; information network F=1.278, p<0.05; and trust network F=1.23, p<0.05). It means that the company not only gained the newly acquired knowledge by the knowledge bridge of the employee-students, but also was able to share it more effectively with members. Third and lastly, the employee-students share various information related to the organization, duties and roles rest in the company throughout break time, working hours and direct inquiries. This means that the employee-students contributed to the innovation of knowledge sharing in the company by sharing knowledge that they gained from the graduate school within the company.

• 한국추진공학회지
• /
• 제2권3호
• /
• pp.1-9
• /
• 1998

풍력에너지는 자연의 에너지를 이용하므로써 환경문제와 경제적 측면에서 다른 대체 에너지보다 훨씬 유리하여 세계 여러 나라에서 각광을 받고 있다. 경제적인 이유로 풍력발전을 위한 회전날개가 대형화 되고 있으며, 경량화를 위해 복합재 구조등의 첨단 항공기술이 적용되고 있는 추세이다. 본 연구에서는 500㎾급 중형 풍력 발전시스템을 개발함에 있어, 적합한 공력 성능을 갖는 경량화 복합재 회전날개의 개선 설계를 수행하였다. 회전날개의 경량화를 위해 기 설계된 쉘-스파 구조물을 쉘-스파-샌드위치 구조물로 설계를 수정하였고, 배선형 해석을 통해서 경량화에 따른 대변형 문제를 검토하였으며, 파괴응력보다 낮은 상태에서 발생되는 국부좌굴에 의한 구조물의 안전성을 검토하였다. 또한, 허브의 금속재 삽입부분의 전단핀에 의한 핀 홀 주위의 응력해석을 수행하여 충분히 안전함을 확인하였고, 수정 설계된 구조물이 운용구간내에서 공진이 발생하지 않음을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제35권5호
• /
• pp.259-266
• /
• 2022

본 논문에서는 프리팹 구조물의 품질관리를 위한 딥러닝 및 비전센서 기반의 조립 성능 평가 모델을 개발하였다. 조립부 검출을 위해 인코더-디코더 형식의 네트워크와 수용 영역 블록 합성곱 모듈을 적용한 딥러닝 모델을 사용하였다. 검출된 조립부 영역 내의 볼트홀을 검출하고, 볼트홀의 위치 값을 산정하여 k-근접 이웃 기반 모델을 사용하여 조립 품질을 평가하였다. 제안된 기법의 성능을 검증하기 위해 조립부 모형을 3D 프린팅을 이용하여 제작하여 조립부 검출 및 조립 성능 예측 모델의 성능을 검증하였다. 성능 검증 결과 높은 정밀도로 조립부를 검출하였으며, 검출된 조립부내의 볼트홀의 위치를 바탕으로 프리팹 구조물의 조립 성능을 5% 이하의 판별 오차로 평가할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.797-818
• /
• 2022

Steel-precast ultra-high-performance concrete (UHPC) composite beams with demountable high-strength friction-grip bolt (HSFGB) shear connectors can be used for accelerated bridge construction (ABC) and achieve excellent structural performance, which is expected to be dismantled and recycled at the end of the service life. However, no investigation focuses on the demountability and reusability of such composite beams, as well as the installation difficulties during construction. To address this issue, this study conducted twelve push-out tests to investigate the effects of assembly condition, bolt grade, bolt-hole clearance, infilling grout and pretension on the crack pattern, failure mode, load-slip/uplift relationship, and the structural performance in terms of ultimate shear strength, friction resistance, shear stiffness and slip capacity. The experimental results demonstrated that the presented composite beams exhibited favorable demountability and reusability, in which no significant reduction in strength (less than 3%) and stiffness (less than 5%), but a slight improvement in ductility was observed for the reassembled specimens. Employing oversized preformed holes could ease the fabrication and installation process, yet led to a considerable degradation in both strength and stiffness. With filling the oversized holes with grout, an effective enhancement of the strength and stiffness can be achieved, while causing a difficulty in the demounting of shear connectors. On the basis of the experimental results, more accurate formulations, which considered the effect of bolt-hole clearance, were proposed to predict the shear strength as well as the load-slip relationship of HSFGBs in steel-precast UHPC composite beams.