• 한국항공우주학회지
• /
• 제42권4호
• /
• pp.351-359
• /
• 2014

본 논문에서는 저궤도 소형인공위성에서 위성의 각 부에 전원을 공급하기 위한 리튬이온 배터리 시스템의 신뢰성 확보를 위해 수행한 우주인증시험들의 결과를 나타내었다. 리튬이온 배터리 시스템의 신뢰성을 검증하기 위하여 구조해적, 성능시험, 우주 및 발사환경에서의 환경시험 등을 수행하였다. 모든 해석 및 시험 결과가 요구조건에 만족함을 보임으로써 리튬이온 배터리를 적용한 소형인공위성의 신뢰성을 검증하고 제고할 수 있었다.

• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.37-40
• /
• 2020

Automotive battery system consists of various components such as battery cells, mechanical structures, cooling system, and control system. Recently, various computational technologies are required to develop an automotive battery system. Physics-based cell modeling is used for designing a new battery cell by conducting optimization of material selection and composition in electrodes. Structural analysis plays an important role in designing a protective system of battery system from mechanical shock and vibration. Thermal modeling is used in development of thermal management system to maintain the temperature of battery cells in safe range. Finally, vehicle simulation is conducted to validate the performance of electric vehicle with the developed battery system.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.53-61
• /
• 2019

The seismic capacity of electric cabinets in Nuclear Power Plants (NPPs) should be qualified before installation and be maintained during operation. However it can happen that identical devices cannnot be produced for replacement of devices mounted in electric cabinets. In case of when no In-Cabinet Response Spectrum (ICRS) is available for new devices, ICRS can be generated by using Finite Element Analysis (FEA). In this study we investigate structural response and ICRSs of battery charger which is supplied to NPPs. Test results on the battery charger are utilized in this study. The response is measured by accelerometers installed on the housing of the battery charger and local panels in the battery charger. Numerical analysis model is established based on resonant frequency search test results and validated by comparison with 2 types of earthquake testing results. ICRSs produced from the numerical model are compared with measured ICRSs in the seismic tests. Developed analysis model is a simple reduced model and anticipates ICRSs quite well as measured response in the tests overall despite of its structural limitation.

• Structural Engineering and Mechanics
• /
• 제49권4호
• /
• pp.509-521
• /
• 2014

In this paper two protocols of Wireless Sensor Networks (WSN) are examined through both a simulation and a case study. The simulation was performed with the optimized network (OPNET) simulator while comparing the performance of the Ad-Hoc on demand Distance Vector (AODV) and the Dynamic Source Routing (DSR) protocols. This is compared and shown with real-world measurement of deflection from eight wireless sensor nodes. The wireless sensor response results were compared with accelerometer sensors for validation purposes. It was found that although the computer simulation suggests the AODV protocol is more accurate, in the case study no distinct difference was found. However, it was shown that AODV is still more beneficial in the field as it has a longer battery life enabling longer surveying times. This is a significant finding as a large factor in determining the use of wireless network sensors as a method of assessing structural response has been their short battery life. Thus if protocols which enhance battery life, such as the AODV protocol, are employed it may be possible in the future to couple wireless networks with solar power extending their monitoring periods.

• 전기화학회지
• /
• 제11권1호
• /
• pp.37-41
• /
• 2008

The effects of carbon-coated silicon anode on the electrochemical properties and structural change were investigated. The carbon-coated silicon powders have been prepared by thermal decomposition under argon/10wt% propylene mixed gas flow at $700^{\circ}C$. The surface and crystal structure of the synthesized materials were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Lithium cells with electrodes made from the uncoated and the carbon coated silicon anode were assembled and tested. The carbon-coated silicon particles merged together well after the insertion/extraction of lithium ions, and showed a relatively low irreversible capacity compared with the uncoated silicon particle.

• 공업화학
• /
• 제32권4호
• /
• pp.361-370
• /
• 2021

탄소 섬유 강화플라스틱은 가볍지만 우수한 기계적 강도를 가지는 복합재의 한 종류이다. 가벼우면서 우수한 기계적 강도를 가지는 탄소 섬유 강화플라스틱은 산업 전반에 널리 이용되고 있으며, 최근 활발히 연구되고 있는 전기자동차 및 무인기 등의 무게 감소 핵심 대체 부품으로 연구되고 있다. 배터리를 전원으로 사용하는 운송수단 등은 외부 충격에 이차 폭발의 위험이 있기 때문에 배터리를 안전하게 보호할 수 있는 덮개가 필수적인 동시에, 무게를 줄여 주행거리를 늘려야 하는 요구조건을 만족해야 한다. 이러한 요구 조건에 부합하는 재료로 탄소섬유 강화플라스틱이 손꼽히고 있고, 배터리 보호 덮개 및 다양한 대체품으로의 활용이 연구되고 있다. 한편, 우수한 전기적 특성을 가진 탄소 섬유를 배터리 구성품으로 활용하는 연구가 배터리 분야에서 진행 중이고, 이에 더 나아가 탄소 섬유가 배터리를 보호하고 배터리 전극 및 집전체 역할까지 동시에 수행하는 구조용 배터리에 대한 연구가 스웨덴과 미국을 중심으로 활발히 연구 중이다. 본 총설에서는 탄소 섬유의 역할에 따른 구조용 배터리의 분류 및 해당 배터리들에서 발생하는 문제점 등을 포괄하는 최근 연구 동향을 요약하고, 구조용 배터리에 대한 전망을 간략히 논의하고자 한다.

• Composites Research
• /
• 제30권1호
• /
• pp.46-51
• /
• 2017

질량 및 부피 증가없이 전지와 구조물기능을 복합재에 결합시키는 구조전지 연구가 광범위하게 진행되고 있다. 탄소섬유 및 유리섬유를 하중지지 및 음극, 분리막 용도로 사용하고, 하중전달이 가능한 고체전해질을 모재로 쓰는 것이 현재 아이디어 이지만, 고체전해질이 두 성능을 충분히 만족시키지 못하는 수준이라 구조전지를 구현하지 못하고 있는 실정이다. 그래서, 본 연구는 유리섬유 분리막 및 액체전해질을 사용하여 하중지지 및 전지의 기능을 동시에 수행하는 실험을 구성하여 액체전해액을 사용한 구조전지의 가능성 및 전기적 물성 변화를 관찰하였다. 인장된 분리막은 안정성을 떨어트리는 영향을 미치는데, 이는 양극의 미세입자들이 늘어난 유리섬유의 틈새로 침투하는 것을 분리막이 막지 못하기 때문이라 예상하였고, 상용 분리막을 추가로 사용 하여 그 예상되는 원인을 확인해 보았다. 그리고, 이러한 구조전지 시스템을 구현하기 위해서는 유리섬유 특성의 연구와 전극과 분리막의 계면에 대한 연구가 필요하다.

• 전산구조공학
• /
• 제30권3호
• /
• pp.4-9
• /
• 2017

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.48-55
• /
• 2023

In this study, on the structure simulation for manufacturing a high strength/light weight 48V battery housing for a mild hybrid vehicle was conducted. Compression analysis was performed in accordance with the international safety standards(ECE R100) for existing battery housings. The effect of plastic materials on compressive strength was analyzed. Three models of truss, honeycomb and grid rib for the battery housing were designed and the strength characteristics of the proposed models were analyzed through nonlinear buckling analysis. The effects of the previous existing rib, double-sided grid rib, double-sided honeycomb rib and double-sided grid rib with a subtractive draft for the upper cover on the compressive strength in each axial direction were examined. It was confirmed that the truss rib reinforcement of the battery housing was very effective compared to the existing model and it was also confirmed that the rib of the upper cover had no significant effect. In the results of individual 3-axis compression analysis, the compression load in the lateral long axis direction was the least and this result was found to be very important to achieve the overall goal in designing the battery housing. To reduce the weight of the presented battery housing model, the cell molding method was applied. It was confirmed that it was very effective in reducing injection pressure, clamping force and weight.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.210-217
• /
• 2010

This paper introduces a lithium ion battery management system (BMS) for the STSAT-3 satellite. The specifications of a lithium ion battery unit are proposed to supply power to the satellite and the overall electrical and mechanical designs for a lithium ion battery management system are presented. The structural simulation results will be shown to confirm the behavior of both the BMS and the cells.