• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.61-67
• /
• 2015

The concept of horizontal shear connection utilization on wood-concrete beams intends to be an alternative connection detail for composite wood-concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood-concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood-concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood-concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.45-54
• /
• 2003

The density and strength of wood is affected by degradations and defects, such as voids and knots. Old wooden structures such as traditional cultural properties have been deteriorated by these types of defects. They were evaluated by a visual observation that is difficult to evaluate the inner deterioration in structures. In this study, three nondestructive testing techniques were investigated to detect the wooden structural members. Ultrasonic stress wave tests, drilling resistance tests and visual inspections were used to examine the structural wood members. Patterns of Resistograph using by drilling resistance tests could indicate the features of internal wood such as voids, knots, decay, fungi, and so on. The technique just like as ultrasonic stress wave tests, however, difficult to detect exactly area where small amounts of internal deterioration in logs are. In spite of results of ultrasonic stress wave test, the internal deterioration of wooden structural members could be evaluated by the relationship between ultrasonic stress wave tests and drilling resistance tests.

• Structural Engineering and Mechanics
• /
• 제31권3호
• /
• pp.315-331
• /
• 2009

Mechanical connections are recognized as extremely important elements in the aspect of strength and structural safety. However, classical structural model does not consider the connection stiffness properties, and are based on models with pinned or rigid joints only. In fact, mechanical connections are deformable and behave not linearly, affecting the whole structure and inducing nonlinear behavior as well. The quantification of this effect, however, depends on the description of the working of the connectors and the wood response under embedment. The theoretical modeling of wood structures with semi-rigid connections involves not only the structural analysis, but also the modeling of both single and grouped moment resisting connectors and the study of the wood properties under embedment. The proposal of this paper is to approach these aspects, and to quantitatively study the influence of the moment resistant connection in wooden framed structures. Comparisons between rigid and semi-rigid connections and between linear and nonlinear analysis lead to quantitative results.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.405-413
• /
• 2010

A hybrid post and beam shear wall system with structural insulation panel (SIP) infill was developed as a part of a green home 'Han-green' project through post and beam construction for contemporary life style. This project is on-going at the Korea Forest Research Institute to develop a new building system which improves Korean traditional wet-type building system and stimulates industrialized wood construction practice with pre-cut system. Compared to the traditional wet-type infill wall components, the hybrid wall system has benefits, such as, higher structural capacity, better thermal insulation performance, and shorter construction term due to the dry-type construction. To build up the hybrid wall system, in previous, SIP infill wall components can be manufactured at factory, and then inserted and nailed with helically threaded nails into the post and beam members at site. Shear performance of the hybrid wall system was evaluated through horizontal shear tests. The SIP hybrid wall system showed higher maximum shear strength, initial stiffness, ductility, yield strength, specified strength, and the specified allowable strength than those of post and beam with light-frame wall system. In addition to this, the hybrid wall system can provide speedy construction and structural and functional advantages including energy efficiency in the building system.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.404-404
• /
• 2024

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.399-404
• /
• 2010

A new green home designed to save money while at the same time saving the environment with some of the finest green features available in the market. Composite column composed of structural steel and structural glued laminated timber is avery Eco-friendly building products for design building because that use recycled or second hand. For compare to compressive strength of structural glued laminated timber (glulam), structural steel, and composite column (steel-glulam), tested compressive strength of each specimen. 1) structural glued laminated timber : Theoretical compressive strength is 151.6 kN similar to elastic limits. 2) structural steel (H type) : Theoretical compressive strength is 148.2 kN little under the elastic limits. 3) structural steel (D type) : Theoretical compressive strength is 147.3 kN upper than the elastic limits. 4) composite column : Actual elastic limits are about 600 kN. Result in, composite column improve compressive strength of Structural steel column and provide structural stability of the building.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.300-309
• /
• 2009

목재를 이용한 구조의 효율적인 사용은 자원의 낭비를 줄이고 세계 환경을 보호할 수 있다. 이 연구는 대단면 목조건축을 위해 강재와 구조용 집성재를 이용한 내화성능을 지닌 복합재료의 개발을 목적으로 한다. 내화 시험에 앞서 구조용 강재와 구조용 집성재를 이용한 복합재료의 휨강도 특성을 확인하고자 한다. 구조용 강재 보(H type)와 구조용 집성재 보, 구조용 강재와 구조용 집성재를 이용한 복합재료 보의 휨시험을 시행하였다. 구조용 집성재간의 접착제로는 레졸시놀계를 사용하였으며 구조용 강재와 구조용 집성재 간의 접착제로는 폴리우레탄 수지를 사용하였다. 휨시험은 KS F 2150에 의거하여 시행하였으며 각각의 평균 최대하중은 복합재료가 137.5 kN, 구조용 집성재가 106.5 kN, 구조용 강재가 48 kN을 나타내었다. 구조용 집성재가 높은 휨탄성력을 지니고 있기 때문에 복합재료를 사용할 경우 구조적 안정성을 부여할 뿐 아니라 친환경적인 재료로 이용될 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제6권4호
• /
• pp.355-360
• /
• 2005

본 논문에서는 폐목재의 재활용을 위한 1차 파쇄기의 다음 공정인 2차 파쇄기에 대해 경계조건과 하중조건을 적용하여 유한요소법에 의한 ANSYS로 구조해석과 모달해석을 수행하여 응력(stress), 변형률(strain)을 구하고 구조적 타당성을 검토하였다. 이는 안전성을 고려한 설계의 기초 자료가 되며 고유진동수(natural frequency)를 구하여 모터의 회전을 제어함으로서 공진(resonance) 현상을 피하는데 있다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.49-52
• /
• 2008

목재자원을 효율적으로 활용하기 위한 목적으로 개발된 공학목재는 기존에 구조용으로 사용되어 오던 목재제품에 비해 강도가 높으면서도 안정적인 장점을 가지고 있다. 또한 설계 상세에 따라 부재를 주문 제작이 가능하며, 대규모 건축물에도 주요 구조체로 사용되어져 오고 있다. 장 스팬이 요구되는 재료로 구조용 집성재나 목재 I형장선, 단판적층재(LVL) 등을 활용하여 사용되고 있다. 본 프로젝트는 공학목재 중에서 집성재 및 막재를 이용한 구조 시스템으로, 강원도 뿌리기념관 공원공사 중 "야외무대 지붕공사"로 구조 재료, 구조설계 및 시공에 관한 내용으로 구성되어 있다. 지붕 구조재는 PVF/PFLT(테드라 필름코팅) 소재의 막이 사용되었다. 기둥 및 경사 부재는 강재(SS400)를 사용하였고, 캔틸레버 보 부재는 비대칭 구성 집성재(10S-28B)를 이용하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.521-530
• /
• 2011

구조용 집성재의 시장 수요가 확대되고 다양화되면서 교량이나 파고라와 같이 외기에 노출되는 조건에서 사용하기 위한 고 내구성 구조용 집성재에 대한 시장 요구가 증가할 것으로 예견된다. 따라서 본 연구는 국산 침엽수재로 제조되는 구조용 집성재에 적합한 방부처리 기술 및 기준을 개발하기 위한 목적으로 진행되었다. 본 연구에서는 방부처리된 국산 리기다소나무 제재목을 이용하여 구조용 집성재를 제조하고 제조 단계별 생산수율과 KS 품질기준 충족여부를 평가하였다. 방부집성재의 제조수율은 일반 집성재와 큰 차이를 나타내지 않았으며, 목재자원의 효율적인 활용을 위해서는 집성재 제조수율 향상방안과 함께 부산물에 대한 효율적 활용방안도 함께 검토되어야 한다. 리기다소나무 방부처리재의 경우 불균일한 방부약제 흡수량으로 인하여 구조용 집성재 제조용으로 적합하지 않은 것으로 확인되었으며, 집성재 제조 후에 유용성 방부제를 처리하는 방안에 대한 추가적인 검토가 요구되었다.