• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.246-249
• /
• 2007

It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Extruded aluminum parts' cross sections are constant in the axial direction by conventional extrusion method. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment was performed to validate the workability.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.889-894
• /
• 2002

Acharan sulfate (AS) is a glycosaminoglycan (GAG) prepared from the giant African snail, Achatina fulica. In this study, some biological activities of AS were evaluated on the basis of structural similarities to heparin/heparan sulfate and the biological functions of GAGs. We demonstrated that it exhibited strong immunostimulating activities as measured by carbon clearance test in mice and in vivo phagocytosis. It also exhibited a significant hypoglycemic activity in epinephrine (EP)-induced hyperglycemia as well as antifatigue effects by weight-loaded forced swimming test. And it showed hypolipidemic activities in cholesterol-rich mixture induced hyperlipidemia in rats. The above results indicate that AS has diverse biological activities and suggest therapeutically important target molecules.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.3
• /
• pp.207-214
• /
• 2005

After more than 100 years of development, rotating electric machines are a mature industrial product. Nevertheless, improvements are still possible for specific applications, and it is likely that the major evolution will be promoted by new materials and unconventional structures. Till now, plastic materials are an infrequent choice for the electric machines structural parts, but pioneering applications, such as aeronautical components, let some technological scouting: a low-weight/high-efficiency plastic axial flux motor for a solar flying platform is presented as an example of combined new-material/new-geometry development. The basic design aspects and the prototyping choices are presented and discussed together with the first experimental results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1291-1295
• /
• 2004

Histology and transmission electron microscopy studies were carried out on buffalo muscles that were subjected to repeated freeze-thaw cycles at -10 and $-18^{\circ}C$. In the first freeze thaw cycle ($-10^{\circ}C$) structures of muscle showed slight change and closely resembled to those of normal muscle. There were frequent gaps in the half way across the fibres and some cracks in individual fibre were also noticed in second freeze thaw cycle. In the muscle frozen at $-18^{\circ}C$, more pronounced shrinkage with extensive damage of fibres with tearing was observed. The interfibrillar gaps were wider, shrinkage and tearing of the fibres were more distinct after second freeze-thaw cycle. After the second cycle, the interior portion showed large scale degradation of the ultrastructure. Our studies of buffalo muscle showed that under the proper condition, little structural damage takes place in the meat histology and ultrastructure under repeated freeze-thaw conditions. This study adds continued weight to the evidence that limited freeze-thaw cycles will not deteriorate the quality of meat.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.1E
• /
• pp.43-48
• /
• 2006

This paper presents an elastic modulus equation more appropriate for predicting the elastic modulus of structural materials designed for and made of high- and ultra high-strength concrete under current domestic situation in Korea. In order to validate and assess the proposed elastic modulus equation, more than 400 laboratory test data available in the domestic literature on compressive strength of concrete in the range between 400 to 1,000 $kgf/cm^2$ were used and analyzed statistically. Comparison analyses of the proposed elastic modulus equation with previously suggested equations of ACI363R, CEB-FIP, NS3473 and New-RC are also presented to demonstrate its applicability in domestic practice.

• Journal of Hydrogen and New Energy
• /
• v.16 no.1
• /
• pp.74-81
• /
• 2005

The heat treatment of serpentines for mineral carbonation was studied systematically. Crystallographic, spectroscopic and thermochemical properties were investigated for serpentines before and after heat treatment. Drastic weight loss due to the removal of hydroxy groupe(-OH) occupied in serpentine crystalline was revealed after heat treatment. In XPS results, MgO was founded at heat treated serpentine powders while Mg(OH) was observed at untreated serpentine powders. Metallic oxides originated from serpentine ingredients were regenerated by heat treatment.

• Journal of Hydrogen and New Energy
• /
• v.16 no.3
• /
• pp.277-283
• /
• 2005

Pretreatment procedure was investigated into brucite powders for mineral carbonation materials. Higher magnesium content was found from brucite powders and weight loss due to hydroxy group(-OH) elimination, explained by FT-IR spectra, was found after pretreatment. X-ray diffraction results showed that the crystallographic changing of brucite into magnesium oxides during pretreatment. XPS core spectra also showed chemical transformation of magnesium ingredient from hydroxides to oxide.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.1
• /
• pp.58-68
• /
• 1998

Advantages of adhesively bonded joints and techniques of weight reduction have led to increasing use of structural adhesives such as LSI(large scale integration) package, automobile, aircraft in the various industries. In spite of such wide applications of adhesively bonded joints, the evaluation method of bonding strength has not been established. Stress singularity occurs at the interface edges of adhesively bonded joints and it is required to analyze it. In this paper, the stress singularity using 2-dimensional elastic boundary element method (BEM) with the changes of the lap length and adhesive for single lap joint was analyzed, and experiments of strength evaluation were carried out. As the results, the evaluating method of bonding strength considering stress singularity at interface edges of adhesively bonded joints and stress intensity factor of interface crack have been proposed in static and fatigue test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.192-196
• /
• 2004

A combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these forms. We consider not only the minimum weight design problem for the structure, but also the suppression problem of the effect of disturbances for the control system as the purpose of the design. A numerical example shows the validity of combined optimal design of the structure and control systems. We also consider the validity of the sensor-actuator collocation for the control system design in this paper.

• Structural Engineering and Mechanics
• /
• v.7 no.2
• /
• pp.217-224
• /
• 1999

A semi-stochastic process model of reliability was established for hyperbolic cooling towers subjected to combined loadings of wind force, self-weight, temperature loading. Effect of the soil-structure interaction on reliability was evaluated. By involving the gust factor, an equivalent static scheme was employed to convert the dynamic model to static model. The TR combination rule was used to consider relations between load responses. An analysis example was made on the 90M cooling tower of Maoming, Guangdong of China. Numerical results show that the design not including interaction turns to be conservative.