• Title/Summary/Keyword: Structural Transition

Search Result 728, Processing Time 0.03 seconds

Numerical investigation on hydrodynamic response of a SPAR platform for offshore wind energy

  • Arya Thomas;V.K. Srineash;Manasa Ranjan Behera
    • Ocean Systems Engineering
    • /
    • v.14 no.3
    • /
    • pp.211-235
    • /
    • 2024
  • Th COP28 has emphasized the governments to speed up the transition away from fossil fuels to renewables such as wind and solar power in their next round of climate commitments. The steady and less turbulent wind over the ocean draws increased attention of governments, industries and researchers on exploring advanced technologies to extract energy from offshore wind. The present study numerically investigates the hydrodynamic behavior of a SPAR-type Floating Offshore Wind Turbine (FOWT) under various wave conditions and mooring line configurations. One of the major focuses of this study is investigating a freak wave's impact on a FOWT and determining its extreme responses. The study investigates the structural response under various wave impact for different configurations of mooring lines. The present study examines the wave-structure interaction under regular and freak wave conditions using numerical modelling approach. During the study, it is ensured that the natural frequency and wave induced motions of SPAR are inline with the experimental studies; thereby increasing the confidence in using the numerical model and domain for this investigation. The study considers the behaviour of slack and taut mooring arrangements under these wave conditions. The study observed that a taut mooring configuration can be efficient in restraining the FOWT motions, especially under a freak wave scenario. The Froude-Krylov force shows a non-linearity due to the non-uniform profile of the platform under all wave conditions. Overall, the study contributes to determining the performance of the mooring configurations under different wave conditions.

Molecular Dynamics Simulation Study of Lipase-catalyzed Esterification of Structural Butanol Isomers in Supercritical Carbon Dioxide (초임계 이산화탄소에서 리파아제-효소를 이용한 부탄올 구조이성질체의 에스테르화 반응의 분자 동역학 연구)

  • Kwon, Cheong-Hoon;Jeong, Jeong-Yeong;Song, Kwang Ho;Kim, Seon Wook;Kang, Jeong-Won
    • Applied Chemistry for Engineering
    • /
    • v.18 no.6
    • /
    • pp.643-649
    • /
    • 2007
  • Lipase-catalyzed esterification of structural butanol isomers and n-butyric acid was investigated in supercritical carbon dioxide. The experiments were performed in a high pressure cell for 5 hrs with a stirring rate of 150 rpm at 323.15 K and 130 bar. The Candida Antarctica lipase B (CALB) was used in whole system as a catalyst. The experimental results were analyzed by GC-FID using a INNOWax capillary column. The conversion yield and the tendency of the esterification in supercritical carbon dioxide were compared with estimated results by molecular dynamics simulation. Based on the Ping-Pong Bi-Bi mechanism with competitive inhibition, each step of the reaction was optimized; using this result the transition state was predicted. Conformational preference of isomers was also analyzed using molecular dynamics simulations. This kind of approach will be further extended to the prediction of enzyme-catalyzed reactions using computers.

Impact of Population Growth on Labor Force and Employment in Korea; Transition and Prospect (장기인구성장과 노동력 수급 전망)

  • 박래영
    • Korea journal of population studies
    • /
    • v.8 no.1
    • /
    • pp.47-65
    • /
    • 1985
  • Three stages of population growth during last forty years affected differently to the labor force and employment in Korea. The first impact of rapid population growth on the labor force occured after the end of World War II. Sudden growth of population due to repartriation and refugees directly increased the labor force. Deteriorating labor market conditions were caused not only by the explosive labor supply but also by the shortage of employment opportunities due to a lack of productive facilities. This severe excess supply of labor continued until the early 196Os. Population growth in the second stage which caused by high fertility during the post Korean War baby boom period induced an eventual increase in the labor supply with time lag of more than fifteen years. Younger persons born during baby boom period were flooded the labor market. Fortunately, job opportunities were expanded more rapidly than the labor force supply because high rates of economic growth and speedy industrialization were continued until the later half of 1970s. Unemployment, therefore, decreased dramatically during this period. The effect of third stage which is characterized as mitigated population growth due to birth control has appeared in the labor market since late 1970s. The growth rate of labor force has been going down and the proportion of younger workers was also been decreasing. From the early 1980s, furthermore, partial disharmony between supply of and demand for the younger workers is closing up. Less educated younger workers who works at low wage are lacking while more educated youngers who want to work at high wage are being excess, because a lot of younger prefer higher education rather than productive job. It is expected that the structural inharmony will be diversified in the future in Korea. The labor force will be changed to middleaged, highly educated and womenized till year 2000, and, after then, to old-aged. On the demand side, industries and jobs will transferred to be labor-saving and soft. These structural changes of labor supply and demand will not matching in time. Aggregate supply of labor force will be steadily increasing more rapidly than aggregate demand for labor until year 2000, and this trend will continue to the first one or two decades of the 2lth century because the persons born dufing the baby boom pariod are being eligible couples in recent. Therefore, conclusion is that appropriate manpower development policy as well as sustained birth control policy is necessary for harmonizing the structural unbalance and the disequilibrium between aggregate labor supply and demand in the future.

  • PDF

Examining the Role of ZO Protein in the Cancer Microenvironment (암 미세환경에서 ZO 단백질의 역할 고찰)

  • Min-Hye Kim;Hee-Jae Cha
    • Journal of Life Science
    • /
    • v.34 no.4
    • /
    • pp.279-285
    • /
    • 2024
  • The zonula occludens (ZO) protein serves as a scaffolding protein, providing structural support at the junctions between cells and the cytoplasmic surface. It acts as a bridge between integral membrane proteins and the cytoskeleton. Besides its structural role, it also participates in regulating cell growth and proliferation. Recent studies have highlighted the involvement of ZO protein in various diseases, including cancer. Specifically, research has indicated that ZO protein influences the cancer microenvironment surrounding cancer cells, thereby facilitating their growth and development. ZO proteins exert diverse functions in the cancer microenvironment, impacting processes such as angiogenesis, inflammatory responses, the epithelial-mesenchymal transition, and interactions with mesenchymal stem cells. The specific mechanisms vary depending on the type of cancer and environmental conditions. Recent research unveiled several signaling pathways involving ZO protein, which could potentially impede cancer progression in the tumor microenvironment. Consequently, these insights open avenues for novel treatment strategies. While the numerous physiological, structural, and morphological roles of ZO protein have been observed at the cellular and in vivo levels, understanding the signaling mechanisms it operates in vivo and how these mechanisms influence the cancer microenvironment remains a challenge. In this review, we delineate the characteristics and regulatory mechanisms of ZO protein in the context of the cancer microenvironment. Additionally, we propose leveraging the properties of ZO protein to devise defense mechanisms within the cancer cell environment and provide an overview of its in vivo role.

Structural Behavior of Mixed $LiMn_2O_4-LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ Cathode in Li-ion Cells during Electrochemical Cycling

  • Yun, Won-Seop;Lee, Sang-U
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2011.05a
    • /
    • pp.5-5
    • /
    • 2011
  • The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

  • PDF

Additivity Factors Analysis of Compositions in Li2O-TeO2-ZnO Glass System Determined from Mixture Design (혼합물설계법에 의한 Li2O-TeO2-ZnO 유리의 물성에 대한 조성의 가성성인자 분석)

  • Jung, Young-Joon;Lee, Kyu-Ho;Kim, Tae-Ho;Kim, Young-Seok;Na, Young-Hoon;Ryu, Bong-Ki
    • Korean Journal of Materials Research
    • /
    • v.18 no.11
    • /
    • pp.617-622
    • /
    • 2008
  • In this study, the additivity factors of compositions to density and glass transition point ($T_g$) in a $xLi_2O-(1-x)[(1-y)TeO_2-yZnO]$ (0$T_g$ was discussed. As a method for predicting the relation between glass structure and ionic conductivity, density was measured by the Archimedes method. The glass transition point was analyzed to predict the relation between ionic conductivity and the bonding energy between alkali ions and non-bridge oxygen (NBO). The relation equations showing the additivity factor of each composition to the two properties are as follows: Density(g/$cm^3$) = $2.441x_1\;+\;5.559x_2\;+\;4.863x_3\;T_g(^{\circ}C)$ = $319x_1\;+\;247x_2\;+\;609x_3\;-\;1950x_1x_3$ ($x_1$ : fraction of $Li_2O$, $x_2$ : fraction of $TeO_2$, $x_3$ : fraction of ZnO) The density decreased as $Li_2O$ content increased. This was attributed to change of the $TeO_2$ structure. From this structural result, the electric conductivity of the glass samples was predicted following the ionic conduction mechanism. Finally, it is expected that electric conductivity will increase as the activation energy for ion movement decreases.

Hydrothermal Synthesis and Structural Characterization of x mol% Calcia-Stabilized ZrO2 Nanopowders (x mol% 칼시아-안정화 지르코니아 나노분말의 수열합성 및 구조적 특성평가)

  • Ryu, Je-Hyeok;Moon, Jung-In;Park, Yeon-Kyung;Nguyen, Tuan Dung;Song, Jeong-Hwan;Kim, Taik-Nam
    • Korean Journal of Materials Research
    • /
    • v.22 no.5
    • /
    • pp.220-226
    • /
    • 2012
  • Pure zirconia and $x$ mol% calcia partially stabilized zirconia ($x$ = 1.5, 3, and 8) nanopowders were synthesized by hydrothermal method with various reaction temperatures for 24 hrs. The precipitated precursor of pure zirconia and $x$ mol% calcia doped zirconia was prepared by adding $NH_4OH$ to starting solutions; resulting sample was then put into an autoclave reactor. The optimal experimental conditions, such as reaction temperatures and times and amounts of stabilizer CaO, were carefully studied. The synthesized $ZrO_2$ and $x$ mol% CaO-$ZrO_2$ ($x$ = 1.5, 3, and 8) powders were characterized by XRD, SEM, TG-DTA, and Raman spectroscopy. When the hydrothermal temperature was as low as $160^{\circ}C$, pure $ZrO_2$ and $x$ mol% CaO-$ZrO_2$ ($x$ = 1.5 and 3) powders were identified as a mixture of monoclinic and tetragonal phases. However, a stable tetragonal phase of zirconia was observed in the 8 mol% calcia doped zirconia nanopowder at hydrothermal temperature above $160^{\circ}C$. To observe the phase transition, the 3 mol% CaO-$ZrO_2$ and 8 mol% CaO-$ZrO_2$ nanopowders were heat treated from 600 to $1000^{\circ}C$ for 2h. The 3 mol% CaO-$ZrO_2$ heat treated at above $1000^{\circ}C$ was found to undergo a complete phase transition from mixture phase to monoclinic phase. However, the 8 mol% calcia doped zirconia appeared in the stable tetragonal phase after heat treatment. The result of this study therefore should be considered as the preparation of 8 mol% CaO-$ZrO_2$ nanopowders via the hydrothermal method.

The Structural Effects of Acidic Comonomers in pH/Thermal Sensitive Copolymer Based on N-Isopropylacrylamide on Their LCST Behavior (pH/온도 민감성 N-Isopropylacrylamide계 공중합체의 LCST거동에 대한 산성 공단량체의 구조적 영향)

  • 조항규;김병수;노시태
    • Polymer(Korea)
    • /
    • v.25 no.2
    • /
    • pp.186-198
    • /
    • 2001
  • pH/Thermal sensitive copolymers with the various acidic comonomer compositions composed of N-isopropylacrylamide (NIPAAm) with acrylic acid (AAc), 2-acrylamido glycolic acid (AAmGAc), and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were synthesized by free radial polymerization. In this study, to characterize the effect of different acidic comonomer composition and pH on the lower critical solution temperature (LCST) behaviors of their copolymers. phase transition experiments were performed with a thermo-optical analyzer (TOA). The phase transition temperature (T$^{p}$ ) of aqueous poly(NIPAAm-co-AAc) solution was lowered with increasing the ionization of the acid group in AAc, that is, the ionized state induced the electrostatic repulsion of ionized groups. In contrast, when AAmGAc was introduced into PNIPAAm, T$^{p}$ was little changed at pH 1-3, whereas climbed up significantly from pH 1 to pH 3. In the range of pH 6-10, Tp was lower than that of pH 3-5. This result was considered to be \"Ionic Screen Effect\" and this effect had been also observed in the case of poly(NIPAAm-co-AMPS).-co-AMPS).

  • PDF

Synthesis and Properties of SrMoO4 Phosphors Doped with Various Rare Earth Ions for Anti-Counterfeiting Applications (위조 방지 분야에 응용 가능한 다양한 희토류 이온이 도핑된 SrMoO4 형광체의 제조 및 특성)

  • Moon, Tae-Ok;Jung, Jae-Yong;Cho, Shinho
    • Korean Journal of Materials Research
    • /
    • v.30 no.8
    • /
    • pp.406-412
    • /
    • 2020
  • SrMoO4:RE3+ (RE=Dy, Sm, Tb, Eu, Dy/Sm) phosphors are prepared by co-precipitation method. The effects of the type and the molar ratio of activator ions on the structural, morphological, and optical properties of the phosphor particles are investigated. X-ray diffraction data reveal that all the phosphors have a tetragonal system with a main (112) diffraction peak. The emission spectra of the SrMoO4 phosphors doped with several activator ions indicate different multicolor emissions: strong yellow-emitting light at 573 nm for Dy3+, red light at 643 nm for Sm3+, green light at 545 nm for Tb3+, and reddish orange light at 614 nm for Eu3+ activator ions. The Dy3+ singly-doped SrMoO4 phosphor shows two dominant emission peaks at 479 and 573 nm corresponding to the 4F9/26H15/2 magnetic dipole transition and 4F9/26H13/2 electric dipole transition, respectively. For Dy3+ and Sm3+ doubly-doped SrMoO4 phosphors, two kinds of emission peaks are observed. The two emission peaks at 479 and 573 nm are attributed to 4F9/26H15/2 and 4F9/26H13/2 transitions of Dy3+ and two emission bands centered at 599 and 643 nm are ascribed to 4G5/26H7/2 and 4G5/26H9/2 transitions of Sm3+. As the concentration of Sm3+ increases from 1 to 5 mol%, the intensities of the emission bands of Dy3+ gradually decrease; those of Sm3+ slowly increase and reach maxima at 5 mol% of Sm3+ ions, and then rapidly decrease with increasing molar ratio of Sm3+ ions due to the concentration quenching effect. Fluorescent security inks based on as-prepared phosphors are synthesized and designed to demonstrate an anti-counterfeiting application.

Media Role in the Transition and Consolidation Period of Democracy: A Comparative Study of Korea and Spain (민주주의의 이행 및 공고화 과정에서 미디어의 역할: 한국과 스페인의 비교)

  • Cho, Hang-Je
    • Korean journal of communication and information
    • /
    • v.18
    • /
    • pp.269-303
    • /
    • 2002
  • This article presents a historical account of media role in the transition and consolidation period of democracy. Despite the assumption that media plays a important role in the construction of democracy, it is less clear how the media can affect the process of political change itself. This article seeks to answer some of these question, based on the Mill's macro-social comparative 'method of difference' of Korea and Spain. It is widely agreed that both states achieve democracy through transaction from above(pacts). Media role, however, differs significantly in accordance with authoritarian legacies and civic representativeness of the pacts. Whereas Korean dailies is deepening given market oligopoly and prior practices after democratization, Spain dailies market entirely changed in both structural and spiritual respects. As a result, Korean dailies substantially lacks in civic representativeness as before, contrary to Spain. Spain television settled a sort of the external pluralism. Korean television is pursuing the BBC type of internal pluralism. In Korea, television is more commercial than Spain. Consequently, Spain media serve the consolidation of democracy more than Korea on the whole.

  • PDF