• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.501-508
• /
• 2000

It is demanded to find the dynamic model of a real structure to design a controller. However, as the structure has inherently infinite number of degree-of-freedom, it is impossible to obtain an exact dynamic model of the structure. Instead a reduction model with finite degree-of-freedom is used for the design of a controller. So there exists uncertainty between a real model and a reduction model which causes poor performance of control. All these uncertainties can degrade the control performance and even cause the control instability. Thus, robust control strategy considering the above uncertainties can be an alternative one to guarantee the performance and stability of the control. This study deals with the experimental verification of robust controller design for the active mass driver. $\mu$-synthesis technique is employed as a robust control strategy. Some weights are chosen based on the difference between the initial plant with which the controller is designed and the perturbed plant to be controlled having the actuator uncertainty. The robustness of $\mu$-synthesis technique is compared with the result of LQG strategy, which does not consider the uncertainty.

• Structural Engineering and Mechanics
• /
• v.20 no.2
• /
• pp.143-160
• /
• 2005

Modal analysis of cracked cantilever composite beams, made of graphite-fibre reinforced polyamide, is studied. By using the finite element and component mode synthesis methods, a numeric model applicable to investigate the vibration of cracked composite beams is developed. In this new approach, from the crack section, the composite beam separated into two parts coupled by a flexibility matrix taking into account the interaction forces. These forces are derived from the fracture mechanics theory as the inverse of the compliance matrix calculated with the proper stress intensity factors and strain energy release rate expressions. Numerical results are obtained for modal analysis of composite beams with a transverse non-propagating open crack, addressing the effects of the location and depth of the crack, and the volume fraction and orientation of the fibre on the natural frequencies and mode shapes. By means of modal data, the position and dimension of the defect can be found. The results of the study confirmed that presented method is suitable for the vibration analysis of cracked cantilever composite beams. Present technique can be easily extended to composite plates and shells.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.565-572
• /
• 1994

A method for the classification of kinematic chains according to the similarity in their structures is proposed. Classifcation code is defined from the contracted graph of the kinematic chain. This method of classifying kinematic chains can be effectively used for the systematic enumeration of structurally distinct kinematic chains given the number of links and degrees of freedom of the kinematic chains. Two separate steps for the enumeration are developed in the study. The first step is to generated all the possible classification codes and the next step is to generate individual kinematic chains belonging to each classification code generated. Using this two step procedure, kinematic chains up to 12 links are successfully enumerated in the present study. It is concluded that the two step method can be efficiently used for the type synthesis of mechanisms.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.296-299
• /
• 2005

Sugar polymers have been considered as biomaterial. Biomaterials are widely utilized for a medical applications in direct contact with living tissue Clearly, biomaterials must be carefully and microscopically fabricated for optimal acceptance within the living organism in both functional and structural senses. In this study, the enzymatic synthesis of sorbitan methacrylate from 1,4-sorbitan via the manipulation of an immobilized biocatalyst (Novozym 435) and acryl donors (methacrylic acid and vinyl methacrylate) was evaluated.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1162-1165
• /
• 2004

Size and crystalline phase changes of $Fe_{2}O_{3}$ nanoparticles formed in a $H_{2}/O_{2}$ flame have been investigated. At flame temperatures below $1350^{\circ}C$, the mean particle size increased monotonously with the distance from the burner edge; but in high-temperature flames above $1650^{\circ}C$, it suddenly decreased from 20 nm to ${\sim}3$ nm with the distance from the burner edge. The results of X-ray diffraction and HRTEM showed that this sudden reduction of the size of nanoparticles was accompanied by a partial phase transformation from ${\gamma}$-$Fe_{2}O_{3}$ into ${\alpha}$-$Fe_{2}O_{3}$. We suggest the structural instability due to ${\gamma}-$ to ${\alpha}-phase$ transformation as a mechanism for a rapid fragmentation of 20 nm particles into 3 nm ones.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.51-58
• /
• 1993

The phenol resorcinol formaldehyde resin (PRF) adhesives which are curing at ambient temperature for structural purposes were synthesized. A PRF resin is produced according to the two-stage reaction system. In first stage, a low-condensed resol or methylolated phenol were prepared from phenol by reaction with a formaldehyde in alkaline condition. The molar ratio of phenol to formaldehyde was 1.0~1.4. And in second-stage, resorcinol was added to combine with the methylol group of a low-condensed resol(R/P molar ratio 0.3). The glue-joint strength, pot-life and workability of this synthetic PRF resin were superior to conventional ambient temperature setting adhesives such as oilic urethane or water based polymer-isocyanate resin for wood adhesives.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.990-992
• /
• 2011

In this paper, epoxy nanocomposites, focusing on the electrical properties of the composites to understand controllers, circuit breakers, bushings and power to apply to the modified instrument was carried out basic research. Composed of composites of this study to develop a power unit to control the dispersion synthesis technology is essential electrical appliances such as electrical properties analysis techniques will also need basic research skills and experience accumulated in this study, several areas of applied technology. In this study, promotion and application of nano-composite material application technology power devices than conventional insulation materials and excellent electrical properties and easy synthesis and high reliability are expected to be practical if you expect that its effects are very large. Therefore, this study has very importance.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.347.4-348
• /
• 2002

Recently it has been demonstrated that selective cyclooxygenase-2 (COX-2) inhibitors retain the antiinflammatory effect but with markedly reduced GI toxicity compared to non selective inhibitors such as traditional NSAIDs. As a consequence, intense efforts have been made to develop selective COX-2 inhibtors during the last decade. Two compounds in this class. celecoxib and rofecoxib. are already in the market and are proved as potent and selective COX-2 inhibitors with much better gastric tolerance. However. there are still strong domands for a COX-2 inhibitor with improved efficacy and safety profiles. Here we report the synthesis and biological profiles of 1.5- and 4.5-disubstituted imidazole analogues as structural equivalents of cefecoxib and refecoxib. The imidazole analogues are overlapped well whth the 3D srructures of celecoxib and rofecoxib.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.287-290
• /
• 2010

In the present work we described oxidative cyclisation of peracetylated lactosyl carbamides with N-phenyl-S-chloro isothiocarbamoyl chloride and structural elucidation of novel peracetylated N-Lactosyl-1,2,4-Thiadiazolidin-3-one hydrochlorides. Antimicrobial activities of the title compounds were determined against bacteria S. aureus, E. coli, P. Vulgaris, P. Aeruginosa and fungi A. Niger, Penicillium.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.250-253
• /
• 2008

New issues arise as to surface characterization, quantification and interface formation. Surface and interface control of CdSe nanocrystal systems, one of the most studied and useful nanostructures. Semiconductor quantum dots (QDs) have been the subject of much interest for both fundamental reseach and technical applications in recent years, due mainly to their strong size dependent properties and excellent chemical processibility. In this dissertation, the synthesis of CdSe quantum dots were synthesized by pyrolysis of high-temperature organometallic reagents. In order to modify the size and quality of quantum dots, we controlled the growth temperature and the relative amount of precursors to be injected into the coordinating solvent. Moreover, an effective surface passivation of monodisperse nanocrystals was achieved by overcoating them with a higher-band-gap material. Synthesized CdSe quantum dots were studied to evaluate the optical, electronic and structural properties using UV-absorption, and photoluminescence measurement.