• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.239-248
• /
• 1998

Software reengineering is making various research for solutions against problem of maintain existing system. Reengineering has a meaning of development of softwares on existing systems through the reverse-engineering and the forward-engineering. It extracts classes from existing system's softwares to increase the comprehension of the system and enhance the maintenability of softwares. Most of the important concepts used in reengineering is composition that is restructuring of the existing objects from other components. The classes and clusters in storage have structural relationship with system's main components to reuse in the higher level. These are referenced as dynamic informations through structuring an architect for each of them. The classes are created by extractor, searcher and composer through representing existing object-oriented source code. Each of classes and clusters extract refined informations through optimization. New architecture is created from the cluster based on its classes' relationship in storage. This information can be used as an executable code later on. In this paper, we propose the tools, it presented by this thesis presents a new information to users through analysing, based on reengineering, Object-Oriented informations and practicing composition methodology. These composite classes will increase reusability and produce higher comprehension information to consist maintainability for existing codes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.158-163
• /
• 2011

$CuInS_2$ thin films were prepared using a sol-gel spin-coating method. That makes large scale substrate coating, simple equipment, easy composition control available. The structural and optical properties of $CuInS_2$ thin films that include less toxic materials (S) instead of Se, tetragonal chalcopyrite structure. Copper acetate monohydrate ($Cu(CH_3COO)_2{\cdot}H2O$) and indium acetate ($In(CH_3COO)_3$) were dissolved into 2-propanol and l-propanol, respectively. The two solutions were mixed into a starting solution. The solution was dropped onto glass substrate, rotated at 3000 rpm, and dried at $300^{\circ}C$ for Cu-In as-grown films. The as-grown films were sulfurized inside a graphite container box and chalcopyrite phase of $CuInS_2$ was observed. To determine the optical properties measured optical transmittance of visible light region (380~770 nm) were less than 30 % in the overall. The XRD pattern shows that main peak was observed at Cu/In ratio 1.0 and its orientation was (112). As annealing temperature increases, the intensity of (112) plane increases. The unit cell constant are a = 5.5032 and c = 11.1064 $\AA$, and this was well matched with JCPDS card. The optical transmittance of visible region was below than 30 %.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.324-328
• /
• 2009

The internal short-circuit between cathodes and anodes has been known to be a critical concern for the safety failures of lithium-ion batteries, which is strongly influenced by the thermal stability of separators. In this study, to effectively suppress the internal short-circuit failures, we developed a new composite separator with the improved thermal stability compared to conventional polyolefin-based separators. The composite separators were prepared by introducing a ceramic coating layer ($Al_2O_3$/PVdF-HFP) onto both sides of a polyethylene (PE) separator. The microporous structure of ceramic coating layers is determined by controlling the phase inversion of coating solutions and becomes more developed with the increase of nonsolvent (water) content. This structural change of ceramic coating layers was observed to greatly affect the thermal stability as well as the electrochemical performance of composite separators, which was systematically discussed in terms of phase inversion.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.2
• /
• pp.232-249
• /
• 1999

The purpose of the study was to analyze the experiences of and the unmet needs for sex education of university students during their primary and secondary education. Development and refinement strategies of the sex education curriculum were constructed using the words of university students. The study was conducted during the second trimester of 1998 and the first trimester of 1999. and 356 male and female students were asked to submit weekly descriptive reports on the proposed issues related to sex education. The data were collected and analyzed by the researcher to present and summarize the in-depth meanings . The results were as follows: 1) The problems of the present sex education of primary and secondary education curriculum : it was revealed as too superficial and conventional: it brought about adverse effects because it was not efficient: also it was insufficient and not appropriate to the level of the students. The erroneous stereotypes of our society towards the sexuality act as barriers to effective sex education. 2) The abstract needs for sex education revealed on the analysis of adjectives used by the students were: 'honest, interesting, easy, useful, and correct' 3) The concrete needs for the sex education were: correct understanding of sexuality, establishment of the right sense of values towards sexuality, understanding of male and female sex psychology, knowledge of solutions for sexual problems 4) The developmental strategies for the sex education curriculum were structural, comprehensive, broad, and sufficient education content, concrete and honest explanations about sexuality : provision of early sex education; sex education provided by the parents ; establishment of an open environment for the sex education, graded education reflecting the developmental stages of the youngsters ; up-to-date sex education; preservation of the perspectives of the youngsters; provision of the same sex education opportunities for both girls and boys; practical use of audiovisual aides; open discussion; development of novel education methods like field trips 5) The change of knowledge, attitudes, and values towards sexuality after finishing the sex education course were: establishment of right sense of value towards sexuality ; reconfirmation of the concepts and value for life; belief of the necessity of sex education; change of attitudes towards womanhood; reinforcement of the self-conceit, consolidation of filial piety; and acquisition of the practical knowledge.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.234-245
• /
• 2003

Most of the concrete bridge structures are exposed to damage due to the excessive traffic loading and the aging of the structure. The damage of concrete causes the further deterioration of the function in the concrete structure due to corrosion of the reinforced bars and decohesion between the concrete and the reinforced bar. The quick rehabilitation of the damaged concrete structures has become of great importance in the concrete structural system in order to avoid the further deterioration of the structures. Recently fiber sheets are used for strengthening the damaged concrete structures due to its many advantages such as its durability, non-corrosive nature, low weight, ease of application, cost saving, control of crack propagation, strength to thickness ratio, high tensile strength, serviceability and aesthetic. However, the lack of analytical procedures for assessing the nominal moment capacity by the fiber sheet reinforcement leads to difficulties in the effective process of decisions of the factors in the strengthening procedure. In this work, flexural strengthening effects by fiber sheets bonded on bottom face of the member are studied for the reinforced concrete T beam. In addition, auxiliary flexural strengthening effects by U-type fiber sheets bonded on bottom and side faces of the member to prevent delamination of the bottom fiber sheet are theoretically investigated. The analytical solutions are compared with experimental results of several references to verify the proposed approach. It is shown that the good agreements between the predicted results and experimental data are obtained.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.227-232
• /
• 2013

Al-based alloys have recently attracted considerable interest as structural materials and light weight materials due to their excellent physical and mechanical properties. For the investigation of the potential of Al-based alloys, a surface porous $Al_{88}Cu_6Si_6$ eutectic alloy has been fabricated through a chemical leaching process. The formation and microstructure of the surface porous $Al_{88}Cu_6Si_6$ eutectic alloy have been investigated using X-ray diffraction and scanning electron microscopy. The $Al_{88}Cu_6Si_6$ eutectic alloy is composed of an ${\alpha}$-Al dendrite phase and a single eutectic phase of $Al_2Cu$ and ${\alpha}$-Al. We intended to remove only the ${\alpha}$-Al phase and then the $Al_2Cu$ phase would form a porous structure on the surface with open pores. Both acidic and alkaline aqueous chemical solutions were used with various concentrations to modify the influence on the microstructure and the overall chemical reaction was carried out for 24 hr. A homogeneous open porous structure on the surface was revealed via selective chemical leaching with a $H_2SO_4$ solution. Only the ${\alpha}$-Al phase was successfully leached while the morphology of the $Al_2Cu$ phase was maintained. The pore size was in a range of $1{\sim}5{\mu}m$ and the dealloying depth was nearly $3{\mu}m$. However, under an alkaline NaOH, aqueous solution, an inhomogeneous porous structure on the surface was formed with a 5 wt% NaOH solution and the morphology of the $Al_2Cu$ phase was not preserved. In addition, the sample that was leached by using a 7 wt% NaOH solution crumbled. Al extracted from the Al2Cu phase as ${\alpha}$-Al phase was dealloyed, and increasing concentration of NaOH strongly influenced the morphology of the $Al_2Cu$ phase and sample statement.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.81-88
• /
• 2006

The Yttria Partially Stabilized Zirconia powder was prepared by spontaneous precipitation method using $ZrOCl_2{\cdot}8H_O-YCl_33{\cdot}6H_2O$ solution as a starting materials. The optimal experimental conditions such as concentration and pH of starting solutions, the amounts of stabilizer $Y_2O_3$ used, and sintered temperature were carefully studied. The best condition for synthesizing $ZrO_2$ was experimentally selected and applied throughout this study for the preparation of the 3 mole% $Y_2O_3$ partially stabilized zirconia, 3YSZ. The physical properties of 3YSZ was examined by XRD, Raman, DT A, and SEM. The structural transition from pure monoclinic high temperature $ZrO_2$ to tetragonal room temperature 3YSZ was made possible by the added amount of $Y_2O_3$ in the $ZrO_2+Y_2O_3$ system. All Raman Spectrum band appeared in the lower wave numbers rather than in higher wave numbers as structure changes from monoclinic to tetragonal.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.487-492
• /
• 2007

Using the selective host-guest inclusion of $G_2$[naphthalene disulfonate], the structural isomers of 1,2-dibromobenzene and 1,3-dibromobenzene were separated. As such, 1,3-dibromobenzene was selectively included as guest into the host framework in mixture isomers over 30% fraction of 1,3- dibromobenzene ($X_{1,3-DBB}=0.3$) whereas 1,2-dibromobenzene as guest was selective to the inclusion below $X_{1,3-DBB}=0.3$. This was due to the selectivity of host framework toward the guest molecules playing a role of template to the host framework. From the powder pattern XRD of inclusion compounds crystallized in pure isomer and mixture solutions, the template roles of guest molecules to the host framework were confirmed. Using the DSC, it was found that the more energy was required to release 1,3-dibromobenzene of guest from the host framework than 1,2-dibromobenzene due to the higher thermal stability. The thermal stability of the $G_2NDS$-1,3-dibromobenzene inclusion compound was consistent with the high selectivity of 1,3- dibromobenzene to the host framework in broad range of fraction in the isomer mixture

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4648-4659
• /
• 2011

Korea experienced rapid urbanization due to high growth of economy. As people left the country and gathered in the city, the size of city has been expanded, resulting in unbalanced development of the land. In addition, it appears in diverse aspects from nationwide phenomenon to the local development in each city unit. In particular, it even tends to become social problems in the metropolitan cities. As a solution for it, this study conducts theoretical consideration on sustainability in the aspect of balanced urban development and suggests measures through analysis on Siheung-city. The result is as follows. First of all, comprehensive approach is required based on sustainability. It is required to derive balanced city development by expanding it to the social, cultural and economic aspects. Second, integrated management policy is required for the original city along with new development. It should be considered together with diverse social and physical aspects. Third, approach from the aspect of city planning is required through consideration on flat city expansion and connection with city space structural. Fourth, in order to foster balanced urban development, it is needed to grope for solutions for imbalanced urban development through the participation of diverse groups such as local residents, private enterprisers, and the non-profit civic groups of the local community along with the mediation among persons interested. And continuous support of administrative authorities should be obtained to create such environment.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.1-22
• /
• 2017

Independent short animation was the expression method for young animation creators through creative and progressive representation. Since the birth of animation, independent short animation has become a driving force for qualitative development and diversification of animation. This has brought many works to the world that emphasize experimentation and challenges in the history of animation and in countries that have the rich animation resources such as France, Japan, and Canada, they recognize its importance and supports young creators in order to maintain the value of it. However, Korean animations are evaluated the quality of works by the popularity of the children, moreover, companies that focus on developing and selling products, including toys, rather than animation works themselves and public awareness that accepts them are formed throughout the Korean animation industry. Because of these points, Korean animation creators can not express the creative vision for the future and philosophical awareness of the problem and they are trapped in commercial animation markets. In order to re-leap and expand the Korean animation industry, which has reached the saturation level with infant animation, it is necessary to reestablish the value of independent short animations with challenging and experimental characteristics and requires the creative environment and support system for the diversity of Korean animation industries, including the achieving commercial goals through good planning, story development and technological innovation. For this purpose, this paper analyzes the current state of production, screening, distribution, and government support of independent short animation in Korea, and explores the structural problems and solutions.