• 한국터널지하공간학회 논문집
• /
• 제17권1호
• /
• pp.49-63
• /
• 2015

본 논문에서는 가상 해저터널의 세그먼트 라이닝의 부재력 평가하여 수심별 세그먼트 최적 두께 산정 및 하중식에 따른 부재력 변화에 관한 내용을 다루었다. 가상 해저터널의 세그먼트 부재력을 평가하기 위해 먼저 다양한 설계 조건을 도출하고 이에 대해 2-Ring Beam 모델을 이용한 구조해석을 수행하여 부재력을 산출하였다. 산출한 부재력을 이용하여 예비 철근 배근을 통해 단면검토를 수행하여 각각의 지층별로 철근 배근을 조절하여 최적 두께를 산정하였다. 검토 결과를 토대로 시공조건에 따른 부재력 변화 경향을 검토하였으며 아울러 다양한 시공조건에 따른 최적 라이닝 단면을 제시하였다.

• 인터넷정보학회논문지
• /
• 제25권4호
• /
• pp.73-86
• /
• 2024

With the acceleration of regional economic integration, the agricultural trade network within the RCEP region presents new opportunities and challenges for member countries. This study focuses on agricultural trade among RCEP members from 2011 to 2020, utilizing social network analysis to explore the structural characteristics and evolutionary trends of the trade network. Additionally, an extended gravity model is employed to empirically analyze the key factors influencing South Korea's agricultural trade with other member countries. The findings reveal that: (1) Agricultural trade relationships within the RCEP region are stable and mature, with high interconnectivity in the trade network, indicating a trend towards balanced development. (2) The positions of member countries within the agricultural trade network are characterized by both high density and heterogeneity. (3) South Korea's agricultural trade with RCEP member countries is positively influenced by the economic size, population size, and governance level of its trading partners, while South Korea's own indicators show no significant effect. The trade distance between South Korea and member countries also has a positive impact on agricultural trade. By combining social network analysis with an extended gravity model, this study provides a multi-faceted quantitative analysis of the RCEP agricultural trade network, offering new insights into regional agricultural trade. It also provides empirical evidence for agricultural trade cooperation between South Korea and other RCEP countries.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.45-48
• /
• 2007

The aim of this study is to estimate the compressive force of steel member using a system identification technique with vibration measurements. To date, several methods have been presented to estimate the compressive force using static and/or dynamic responses of the steel member. However, each and every one of these methods has its disadvantages as well as advantages in its procedures, level of accuracy, and equipment requirements. The paper reports a qualitative investigation of vibration under monoharmonic excitation. The methodology utilizes the relationship between the natural frequencies, the structural parameters, and the compressive force of the member. In this paper, experimental results are presented with a steel beam subjecting to several compressive forces and the proposed method is validated using both numerical and experimental data.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.191-197
• /
• 2016

RCAR low speed impact test estimates repair cost of the impacted vehicle. In this study, for a mid-size vehicle front body model, structural performance for RCAR low speed impact were analyzed with changing the bumper stay shape and size. First, for improving the impact load transfer mechanism to side member the stay rear section shape at connecting area with side member was modified and the stay outer was redesigned to be normal to the barrier. Next, the investigation on stay thickness effect was carried out and the performances of several models with different forming shape were compared. The final design showed 13mm decrease in the maximum barrier intrusion distance and greatly reduced side member deformation. Additional analyses explained the validity of the final design.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.1-15
• /
• 2000

It is inevitable that every space truss structure would be under some form of direct member loading. At least the structure self weight certainly affects the members directly, and in structures involving top concrete slabs or cladding, their weight is also likely to apply some lateral pressure on the members. In spite of that, direct member loading is usually ignored in space truss designs and assumed to lead only to a negligible effect on truss performance. This study is intended to explore this point and identify the actual effects that can arise from direct member loading, and eventually provide an answer to the question of whether the current design practice is satisfactory or certain modifications would be needed. After presenting two analytical techniques to allow the study of space trusses with laterally loaded members, the paper describes a wide parametric study involving practical-size space trusses with different configurations, aspect ratios, boundary conditions and number of chord panels.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.317-320
• /
• 2006

In order to determine a minimum thickness of the pultruded GFRP panel as a structural member, some experimental studies were performed. GFRP tubes with 2mm, 4mm, 6mm thickness were manufactured by pultrusion process. First, coupon tests for finding mechanical properties were carried out. Comparisons between test results and analysis results based on classical laminate theory showed large differences in case of 2mm, 4mm specimens. The reason is that it is difficult to apply appropriate pultruding force and keep layered stitched fabric flat for the pultrusion process of complex shaped FRP member with small thickness. On the consequence, we decide 6mm as a minimum thickness of FRP member. Second, 4-point bending tests were performed and the results with compared with numerical analysis. The behavior of FRP tube can be exactly predicted by numerical analysis if buckling analysis is included.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.189-211
• /
• 2010

The behaviour of a reinforced concrete tension member is governed by the contribution of concrete between cracks, tension stiffening effect. Under highly repeated loading, this contribution is progressively reduced and the member response approximates that given by the fully cracked member. When focusing on the unloaded state, experiments show deformations larger than those of the naked reinforcement. This has been referred to as negative tension stiffening and is due to the fact that concrete carries compressive stresses along the crack spacing, even thought the tie is subjected to an external tensile force. In this paper a cycle-dependent approach is presented to reproduce the behaviour of the axially loaded tension member, paying attention to the negative tension stiffening contribution. The interaction of cyclic bond degradation and time-dependent effects of concrete is investigated. Finally, some practical diagrams are given to account for the negative tension stiffening effect in reinforced concrete elements.

• 소성∙가공
• /
• 제30권5호
• /
• pp.236-241
• /
• 2021

This study describes the cold stamping process design procedure to secure the formability and dimensional accuracy of the automotive structural component fabricated by 1.5GPa grade ultra-high strength steel sheet. The target product is selected as the front side rear lower member which is the most important energy absorption part in the frontal impact condition. To secure the product quality, an intermediate product shape is added while considering the low elongation and high strength characteristics of 1470Mart. The sequential optimization procedure of the intermediate product shape, the fine dimensional quality is then achieved without any crack or wrinkling. The cold stamping method with ultra-high strength steel sheets is validated by conducting the die tryout of the front side rear lower member.

• 한국공간구조학회논문집
• /
• 제21권1호
• /
• pp.61-70
• /
• 2021

This paper describes a novel zero-stress member selecting method for sizing optimization of truss structures. When a sizing optimization method with static constraints is implemented, the member stresses are affected sensitively with changing the variables. However, because some truss members are unaffected by specific loading cases, zero-stress states are experienced by the elements. The zero-stress members could affect the computational cost and time of sizing optimization processes. Feature selection approaches can be then used to eliminate the zero-stress member from the whole variables prior to the process of optimization. Several numerical truss examples are tested using the proposed methods.

• 토지주택연구
• /
• 제2권2호
• /
• pp.195-204
• /
• 2011

철근콘크리트 건축물에 중장비를 탑재하여 해체작업을 시행할 때, 중장비와 철거잔재의 중량은 건축물을 설계할 당시에 고려하지 못한 하중으로 작용한다. 그러나 우리나라 해체 현장에서는 건축물의 안전성에 대한 구조전문가의 검토 없이, 현장 관리자나 작업자의 경험에 의하여 중장비 탑재와 해체작업이 이루어지고 있어 작업 중에 건축물이 붕괴하거나 중장비가 추락하는 사례도 발생하고 있다. 따라서 해체공사 시행 과정에서 해체 대상 건축물의 구조안전성을 평가할 수 있는 평가기법과 구조부재가 부담할 수 있는 적정 장비중량에 대한 기준 마련이 시급한 실정이다. 이 논문에서는 기계해체 현장에 대한 방문조사와 작업근로자에 대한 설문조사를 통해 해체 대상 건축물의 안전성 평가에 필요한 철거잔재 하중, 하중계수, 강도감소계수, 작업하중 등을 제안하였다. 해체 현황을 고려한 구조물의 해석과 부재(슬래브, 보)의 적절한 안전성 평가방법을 제시하였으며, RC 슬래브와 RC 보의 제원에 따라 양중 가능한 중장비의 중량을 제시하였다. 이 연구에서 제안한 해체구조물의 안전성 평가기법과 중장비 탑재 등급은 해체대상 구조부재의 성능을 합리적으로 평가하고, 적정한 장비운영을 통한 해체작업의 효율성과 안전성을 향상하는 데 유용하게 활용될 수 있을 것으로 사료된다.