• 지질공학
• /
• 제30권3호
• /
• pp.279-288
• /
• 2020

샌드댐이란 하천의 횡단에 보 등을 설치하고 확보된 공간에 모래와 같은 투수성 재료와 물을 함께 채운 후, 공극내의 물을 저장하여 사용하기 위한 구조물이다. 주로 아프리카 케냐를 중심으로 많은 사례가 보고되고 있는 샌드댐에 관해 본 연구에서는 샌드댐의 구조적 안전과 취수량 증대를 위한 설계 방안을 제시하였다. 첫째, 샌드댐의 콘크리트 벽체의 안정성을 확보하기 위해 철근을 가시철근으로 연결, 시공의 편리함을 제시했다. 둘째, 지오텍스타일을 이용하여 증발을 45%에서 8%로 감소시킬 수 있었고 수평방향 투수배출량도 크게 줄일 수 있어 취수량은 기존대비 약 2.4배 증가되는 것을 알 수 있었다. 이 밖에도 수질개선을 위한 침사지 설계로 여과효율을 높였고, 토양수분장력계를 통한 모니터링 방법도 제시하였다.

• 대한수학교육학회지:수학교육학연구
• /
• 제9권2호
• /
• pp.383-404
• /
• 1999

This study began with an epistemological question about the nature of mathematical cognition in relation to the learner's activity. Therefore, by examining Piaget's 'reflective abstraction' theory which can be an answer to the question, we tried to get suggestions which can be given to the mathematical education in practice. 'Reflective abstraction' is formed through the coordination of the epistmmic subject's action while 'empirical abstraction' is formed by the characters of observable concrete object. The reason Piaget distinguished these two kinds of abstraction is that the foundation for the peculiar objectivity and inevitability can be taken from the coordination of the action which is shared by all the epistemic subjects. Moreover, because the mechanism of reflective abstraction, unlike empirical abstraction, does not construct a new operation by simply changing the result of the previous construction, but is forming re-construction which includes the structure previously constructed as a special case, the system which is developed by this mechanism is able to have reasonability constantly. The mechanism of the re-construction of the intellectual system through the reflective abstraction can be explained as continuous spiral alternance between the two complementary processes, 'reflechissement' and 'reflexion'; reflechissement is that the action moves to the higher level through the process of 'int riorisation' and 'thematisation'; reflexion is a process of 'equilibration'between the assimilation and the accomodation of the unbalance caused by the movement of the level. The operational learning principle of the theorists like Aebli who intended to embody Piaget's operational constructivism, attempts to explain the construction of the operation through 'internalization' of the action, but does not sufficiently emphasize the integration of the structure through the 'coordination' of the action and the ensuing discontinuous evolvement of learning level. Thus, based on the examination on the essential characteristic of the reflective abstraction and the mechanism, this study presents the principles of teaching and learning as following; $\circled1$ the principle of the operational interpretation of knowledge, $\circled2$ the principle of the structural interpretation of the operation, $\circled3$ the principle of int riorisation, $\circled4$ the principle of th matisation, $\circled5$ the principle of coordination, reflexion, and integration, $\circled6$ the principle of the discontinuous evolvement of learning level.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.831-849
• /
• 2015

Seismic-design procedures for walls require that the confinement in the critical (plastic hinge) regions should extend over a length in the compression zone of the cross section at the wall base where concrete strains in the Ultimate Limit State (ULS) exceed the limit of 0.0035. In a performance-based framework, confinement is linked to required curvature ductility so that the drift demand at the performance point of the structure for the design earthquake may be met. However, performance of flexural walls in the recent earthquakes in Chile (2010) and Christchurch (2011) indicates that the actual compression strains in the critical regions of many structural walls were higher than estimated, being responsible for several of the reported failures by toe crushing. In this study, the method of estimating the confined region and magnitude of compression strain demands in slender walls are revisited. The objective is to account for a newly identified kinematic interaction between the normal strains that arise in the compression zone, and the lumped rotations that occur at the other end of the wall base due to penetration of bar tension yielding into the supporting anchorage. Design charts estimating the amount of yield penetration in terms of the resulting lumped rotation at the wall base are used to quantify the increased demands for compression strain in the critical section. The estimated strain increase may exceed by more than 30% the base value estimated from the existing design expressions, which explains the frequently reported occurrence of toe crushing even in well confined slender walls under high drift demands. Example cases are included in the presentation to illustrate the behavioral parametric trends and implications in seismic design of walls.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.349-360
• /
• 2018

Reinforced concrete (RC) moment frames supported on two ground levels have been widely constructed in mountainous areas with medium to high seismicity in China. In order to investigate the seismic collapse behavior and risk, a scaled frame model was tested under constant axial load and reversed cyclic lateral load. Test results show that the failure can be induced by the development of story yielding at the first story above the upper ground. The strong column and weak beam mechanism can be well realized at stories below the upper ground. Numerical analysis model was developed and calibrated with the test results. Three pairs of six case study buildings considering various structural configurations were designed and analyzed, showing similar dynamic characteristics between frames on two ground levels and flat ground of each pair. Incremental dynamic analyses (IDA) were then conducted to obtain the seismic collapse fragility curves and collapse margin ratios of nine analysis cases designated based on the case study buildings, considering amplification of earthquake effect and strengthening measures. Analysis results indicate that the seismic collapse safety is mainly determined by the stories above the upper ground. The most probable collapse mechanism may be induced by the story yielding of the bottom story on the upper ground level. The use of tie beam and column strengthening can effectively enhance the seismic collapse safety of frames on two ground levels.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.7-17
• /
• 2017

In Chinese Design Codes, for super high-rise buildings with complex structural distribution, which are regarded as code-exceeding buildings, elasto-plastic time history analysis is needed to validate the requirement of "no collapse under rare earthquake". In this paper, a 117-story super high-rise building is discussed. It has a height of 597 m and a height-width ratio of 9.5, which have both exceeded the limitations stipulated by the Chinese Design Codes. Mega columns adopted in this structure have cross section area of about $45m^2$ at the bottom, which is infrequent in practical projects. NosaCAD and Perform-3D, both widely used in nonlinear analyses, were chosen in this study, with which two model were established and analyzed, respectively. Elasto-plastic time history analysis was conducted to look into its seismic behavior, emphasizing on the stress state and deformation abilities under intensive seismic excitation.From the comparisons on the results under rare earthquake obtained from NosaCAD and Perform-3D, the overall responses such as roof displacement, inter story drift, base shear and damage pattern of the whole structure from each software show agreement to an extent. Besides, the deformation of the structure is below the limitation of the Chinese Codes, the time sequence and distribution of damages on core tubes are reasonable, and can dissipate certain inputted energy, which indicates that the structure can meet the requirement of "no collapse under rare earthquake".

• 한국터널지하공간학회 논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

강섬유 보강콘크리트는 NATM 터널의 숏크리트와 세그먼트 등 라이닝에 주로 적용된다. 터널화재시 라이닝은 화재에 직접적으로 노출되기 때문에 고온노출시 SFRC의 성능변화는 매우 중요하다. 본 연구에서는 고온에 노출된 강섬유보강콘크리트의 인장성능을 DPT 실험을 통하여 검토하였다. 고온 노출온도, 강섬유 혼입률 및 종류가 파괴형태, DPT 인장강도, 실험의 변동계수에 미치는 영향을 분석하였다. 실험결과, 강섬유 보강으로 인한 잔존인장강도의 증가를 확인하였으며, 혼입률이 증가할수록 효과적임을 확인하였다. 그러나, DPT 인장강도는 고온노출로 인한 파괴면의 변화를 고려할 수 없기 때문에 파괴에너지의 고찰이 필요한 것으로 판단된다.

• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.163-177
• /
• 2020

Concentrically Braced Frames (CBFs) are commonly used in the construction of steel structures because of their ease of implementation, rigidity, low lateral displacement, and cost-effectiveness. However, the principal disadvantage of this kind of braced frame is the inability to provide deformation capacity (ductility) and buckling of bracing elements before yielding. This paper aims to present a novel Composite Buckling Restrained Fuse (CBRF) to be utilized as a bracing segment in concentrically braced frames that allows higher ductility and removes premature buckling. The proposed CBRF with relatively small dimensions is an enhancement on the Reduced Length Buckling Restrained Braces (RL-BRBs), consists of steel core and additional tensile elements embedded in a concrete encasement. Employing tensile elements in this composite fuse with a new configuration enhances the energy dissipation efficiency and removes the tensile strength limitations that exist in bracing elements that contain RL-BRBs. Here, the optimal length of the CBRF is computed by considering the anticipated strain demand and the low-cyclic fatigue life of the core under standard loading protocol. An experimental program is conducted to explore the seismic behavior of the suggested CBRF compare with an RL-BRB specimen under gradually increased cyclic loading. Moreover, Hysteretic responses of the specimens are evaluated to calculate the design parameters such as energy dissipation potential, strength adjustment factors, and equivalent viscous damping. The findings show that the suggested fuse possess a ductile behavior with high energy absorption and sufficient resistance and a reasonably stable hysteresis response under compression and tension.

• Structural Engineering and Mechanics
• /
• 제49권4호
• /
• pp.491-498
• /
• 2014

During the past years, the protection of the environment has become a major concern out passing the state frontiers to reach a planetary dimension. Depository waste sites have become a serious problem in terms of their locations and costs. On the other hand, the construction industry has a leading place in terms of quantities of waste produced from the start to the end of each construction site, by the large amounts of raw materials used and their respective consequences on the environment. The recycling of quarry wastes products, of demolished concrete, bricks and large quantities of waste resulting from the transformation of marble blocks can provide ideal solutions and advantages for the preservation of the environment, to become a supplementary source of aggregates. The main purpose of this study is to show technically the possibility of recuperating the aggregates of marble wastes as a partial substitute or total in the mortars. The aggregates used in this study is a sand of marble wastes (excess loads of sand exposed to bad weather conditions) of the quarry derived from Fil-fila marble (Skikda, east of Algeria). To achieve this work, we have studied the effect of sand substitution of marble wastes in the mortar with rates of (25, 50, 75, 100%); comparing the results obtained with reference samples (0%), the properties when the samples are fresh, and the mechanical performances of mortars at solid state (loss and gain of weight, dimensional variations). The introduction of recycled sand in the mortars gives good results and can be used as granulates.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.211-228
• /
• 2013

The structure analyzed in this paper has particular building style and special structural system. It is a rigid-connected twin-tower skyscraper with asymmetrical distribution of stiffness and masses in two towers. Because of the different stiffness between the north and the south towers, the torsion seismic vibration is significant. In this paper, in order to study the seismic response of the structure under both frequent low-intensity earthquakes as well as rare earthquakes at the levels of intensity 7, the analysis model is built and analyzed with NosaCAD. NosaCAD is an nonlinear structure analysis software based on second-development of AutoCAD with ObjectARX. It has convenient modeling function, high computational efficiency and diversity post-processing functions. The deformations, forces and damages of the structure are investigated based on the analysis. According to the analysis, there is no damage on the structure under frequent earthquakes, and the structure has sufficient capacity and ductility to resist rare earthquakes. Therefore the structure can reach the goal of no damage under frequent earthquakes and no collapse under rare earthquakes. The deformation of the structure is below the limit in Chinese code. The time sequence and distribution of damages on tubes are reasonable, which can dissipate some dynamic energy. At last, according to forces, load-carrying capacity and damage of elements, there are some suggestions on increasing the reinforcement in the core tube at base and in stiffened stories.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.439-447
• /
• 2018

The structural behaviors of cylindrical barns as a specific engineering structure have been considered as a complicated computing process. The structure design against the earthquake load, to protect by using the code, is an urgency avoiding unexpected damages. The situation has been subjected to the applied design method if there would be no failure across the construction procedures. The purpose of the current study is to clarify the behaviors of cylindrical reinforced concrete barns through the analytic methods across the mass and Lagrangian approaches through the whole outcomes comparison indicating that the isoparametric element obtained from the Lagrangian approach has been successfully applied in the barns earthquake analysis when the slosh effects have been discarded. The form of stress distributions is equal with $s_z$ closed distributions to one another.