• Resources Recycling
• /
• v.30 no.5
• /
• pp.49-56
• /
• 2021

In this study, using strontium sulfate (SrSO₄) recovered from magnetite ore in Hongcheon, the Black Ash process was used to produce strontium carbonate (SrCO₃). In the carbothermic reaction step, SrSO₄ was reacted with carbon (C) at 1273 K under Ar gas atmosphere using a gas-tight quartz reactor to produce strontium sulfide (SrS). Afterward, water leaching of the residues produced from the carbothermic reaction at 353 K and carbonation of the leaching solution using sodium carbonate (Na₂CO₃) at 298 K were conducted to produce SrCO₃. The results of this study demonstrate the feasibility of the production of SrCO₃ via the Black Ash process using domestic magnetite ore containing strontium (Sr).

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.467-472
• /
• 2015

The effect of $SrCO_3$ content on the microstructure, porosity, flexural strength, and pore size distribution of clay-based membrane supports was investigated. Green compacts prepared from low cost materials such as kaolin, bentonite, talc, sodium borate, and strontium carbonate were sintered at $1000^{\circ}C$ for 8 h in air. It was possible to control the porosity of the clay-based membrane supports within the range of 33% to 37% by adjusting the $SrCO_3$ content. The flexural strength of the clay-based membrane supports was found to strongly depend on their porosity. In turn, the porosity was affected by the $SrCO_3$ content. The average pore size and flexural strength of the clay-based membrane supports containing 4 wt% $SrCO_3$ were $0.62{\mu}m$ and 33 MPa at 34% porosity.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.107-114
• /
• 1983

Formation of Strontium titanate from the products of coprecipitation takes place at 110$0^{\circ}C$ which is 200-30$0^{\circ}C$ lower than that from mechanical mixtures of $SrCO_3$ and $TiO_2$. This is apparently due to the nature of the compounds formed by the reaction of mixtures of aqueous solutions of $SrCl_2$ and $TiCl_4$ with an ammoniacal solution of ammoni-um carbonate and ammonium hydroxide. A procedure is described for preparing strontium titanyl oxalate tetrahydrate in the several mole ratio of $TiCl_4$ to $SrCl_2$. STrontium titanyl oxalates decompose to titanate at elevated temperature. The coprecipitates and the fired specimen were subjected to examined thermal and X-ray analyses and microstruc-ture by SEM.

• Nuclear Engineering and Technology
• /
• v.29 no.2
• /
• pp.127-137
• /
• 1997

Equilibrium concentrations of major elements in an underground repository with a capacity of 100,000 drums have been simulated using the geochemical computer code (EQMOD). The simulation has been carried out at the conditions of pH 12 to 13.5, and Eh 520 and -520 mV. Solubilities of magnesium and calcium decrease with the increase of pH. The solubility of iron increases with pH at Eh -520 mV of reducing environment while it almost entirely exists as the precipitate of Fe(OH)$_3$(s) at Eh 520 mV of oxidizing environment. All of cobalt and nickel are predicted to be dissolved in the liquid phase regardless of pH since the solubility limit is greater than the total concentration. In the case of cesium and strontium, all forms of both ions are present in the liquid phase because they have negligible sorption capacity on cement and large solubility under disposal atmosphere. And thus the total concentration determines the equilibrium concentration. Adsorbed amount of iodide and carbonate are dependent on adsorption capacity and adsorption equilibrium constant. Especially, the calcite turns out to be a solubility-limiting phase on the carbonate system. In order to validate the model, the equilibrium concentrations measured for a number of systems which consist of iron, cement, synthetic groundwater and radionuclides are compared with those predicted by the model. The concentrations between the model and the experiment of nonadsorptive elements cesium, strontium, cobalt nickel and iron, are well agreed. It indicates that the assumptions and the thermodynamic data in this work are valid. Using the adsorption equilibrium constant as a free parameter, the experimental data of iodide and carbonate have been fitted to the model. The model is in a good agreement with the experimental data of the iodide system.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.509-515
• /
• 2009

The aim of this study is investigated greenhouse gas emissions of glass industry, and when calculates greenhouse gas emission, using formula(Tier 3) advising in IPCC(Intergovernmental Panel on Climate Change) and using self designed formula(Tier 3+) authors of this study. Studied to propose calculation formula that can compare these two calculation results and apply to domestic. Formula of Tier 3 calculated to theoretical composition of carbonate material, And Formula of Tier 3+ calculated on the basis of chemical substance formation table that get from glass manufacture company(The S company). As a result, Dolomite, Soda ash, Limestone, Industrial Barium carbonate is calculated value of Tier 3+ lower than value of Tier 3, And Industrial Potassium carbonate, Industrial Strontium carbonate was calculated value of Tier 3 lower than value of Tier 3. This study finding, formula of Tier 3+ has higher confidence than formula of Tier 3 when consider revision about purity of injection raw material. And hereafter, When calculate greenhouse gas emissions about nonmetallic mineral industry, use of Tier 3+ is considered that should be encouraged.

• CELLMED
• /
• v.9 no.4
• /
• pp.7.1-7.4
• /
• 2019

A cuttlefish bone is not a bone, but the internal shell of the Cuttlefish/ sepia officinalis, a small, squid-like cephalopod of phylum molusca, an animals of the order Sepiida. Cuttlefish bone comprises up to 90 percent of its content of calcium carbonate with the abundance of different bioinorganic elements such as magnesium, strontium, iron, even trace amounts of copper, zinc, aragonite and ${\beta}$-chitin which makes it extremely valuable and worthwhile to be used for biomedical research. Unani system of medicine has been using cuttlefish bone under the name of 'kafe dariya' for the treatment various disorders and ailments since centuries. Unani scholars were well aware of the valuable medical and cosmetologically aspect of cuttlefish bone. However, the drug has been forgotten for its beneficial effect and went deep away from the scientific researches. The purpose of the present review is to highlight and revive the data on cuttlefish and cuttlefish bone for its morphology, composition, types, pharmacological actions, temperament, therapeutic dosage, contraindications, correctives, alternatives and therapeutic uses with special reference of Unani medicine to attain its the beneficial features in biomedical sciences.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.435-437
• /
• 2003

In order to investigate processes and factors controlling the chemical and isotopic compositions of the Han River, seasonal studies were carried out. The North Han River was much lower in the concentrations of total dissolved solids (TDS), dissolved inorganic carbon (DIC) and major ions than the South Han River, but higher in $SiO_2$ concentration, $\delta$$^{34}$ $S_{so4}$ value and $^{87}$ Sr/$^{86}$ Sr ratio. This indicates that the chemical and isotopic compositions of the Han River were strongly controlled by the geology of their drainage basins: silicate rocks in the North Han River and carbonate rocks in the South Han River. The $\delta$$^{34}$ $S_{so4}$ values were relatively higher in the North Han River (5.90$\pm$1.46$\textperthousand$)) than in the South Han River (3.48$\pm$0.73$\textperthousand$). This implies that dissolved S $O_{4}$$^{2-}$ in the North Han River might be mostly derived from deposition of atmospheric sulfates, whereas in the South Han River from oxidation of sulfide minerals in the abandoned poly-metallic deposits and the coal-bearing sedimentary rocks distributed over the upstream as well as deposition of atmospheric sulfates. The $^{87}$ S $r^{86}$ Sr ratios in the North Han River were distinctly higher than those in the South Han River, reflecting water-rock interaction with different rock types.pes.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.133-146
• /
• 2021

Aragonite is one of common polymorphs of calcium carbonate (CaCO₃) and formed via biological or physical processes through precipitation in many different environments including marine ecosystems. It is noted that aragonite formation and growth as well as the substitution of trace elements such as strontium (Sr) in the aragonite structure would be dependant on several key parameters such as concentrations of chemical species and temperature. In this study, properties of the incorporation of Sr into aragonite were investigated over a wide range of various saturation conditions and temperatures similar to the marine ecosystem. All pure aragonite samples were inorganically synthesized through a constant-addition method with varying concentrations of the reactive species ([Ca]=[CO₃] 0.01-1 M), injection rates of the reaction solution (0.085-17 mL/min), and solution temperatures (5-40 ℃). Pure aragonite was also formed even under the Sr incorporation conditions (0.02-0.5 M, 15-40 ℃). When temperature and saturation index (SI) with respect to aragonite increased, the crystallinity and the crystal size of aragonite increased indicating the growth of aragonite crystal. However, it was difficult to interpret the crystal growth rate because the crystal growth rate calculated using BET-specific surface area was significantly influenced by the crystal morphology. The distribution coefficient of Sr (K_Sr) into aragonite decreased from 2.37 to 1.57 with increasing concentrations of species (Ca²⁺ and CO₃^2-) at a range of 0.02-0.5 M. Similarly, it was also found that K_Sr decreased 1.90 to 1.54 at a range of 15-40 ℃. All K_Sr values are greater than 1, and the inverse correlation between the K_Sr and the crystal growth rate indicate that Sr incorporation into aragonite is in a compatible relationship.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.109.2-109.2
• /
• 2010

세라믹 필터는 여러 종류의 분진제거 시스템에서 연소 배가스 정제를 위한 가장 적절한 소재로 알려져 있다. 현재까지 다양한 형태의 세라믹 필터가 개발되고 있는데, 캔들 타입(candle type), 튜브 타입(tubular type), 평판 타입(parallel flow type) 등이 그 예이다. 통상적으로 세라믹 캔들 필터는 가압유동층복합발전(PFBC, Pressurize Fluidized-Bed Combustion), 석탄가스화복합발전(IGCC, Integrated coal Gasification Combined Cycle), 석탄가스화연료전지복합발전(IGFC, Integrated coal Gasification Fuel cell Combined cycle)에서 고온 배가스 정제용으로 사용되고 있다. 일반적으로 IGCC나 CTL 합성가스 정제시스템의 경우에는 높은 고압(약 25기압)과 미세분진이 함유되어 있는 분위기에서 운전된다. 그러므로 이때 사용되는 초청정용 세라믹 집진필터는 고온, 고압 및 부식 환경에서 50 MPa 이상을 갖는 높은 강도와 내식성을 갖도록 개발되어야 하기 때문에 SiC(Silicon Carbide)가 가장 적절한 캔들 필터 소재로 적용되고 있다. 이에 따라 집진용 SiC 세라믹 캔들 필터를 개발하기 위해서는 고온에서 내산화성이 우수하고, 부피팽창에 의한 균열이 발생하지 않는 무기결합재의 선정 및 이를 통한 소재의 특성 최적화가 가장 중요한 부분이라 할 수 있다. 본 연구에서는 IGCC나 CTL 공정에 적용하기 위한 SiC 캔들 필터 소재 개발을 위해 래밍성형 공정으로 1m급의 탄화규소 캔들 필터 시작품을 제작하여 SiC 출발입자 크기와 무기계 결합재인 스트론튬 카보네이트의 첨가량 변화에 따른 필터 소재의 특성 평가를 수행하였다.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.113-118
• /
• 2017

BACKGROUND: The carbon (C) isotope ratio (${\delta}^{13}C$) of dissolved organic C (DOC) is an indicator of water pollution source. In this study, the potential use of two pre-treatments for the ${\delta}^{13}C$ analysis, alkaline persulfate oxidation coupled with carbonate precipitation (precipitation) and freeze drying (drying), were compared to suggest a more feasible pre-treatment method. METHODS AND RESULTS: Two reference materials with different ${\delta}^{13}C$ values were used for the experiments; chemical grade glucose ($-12.0{\pm}0.02$‰) and pig manure compost extract ($-23.3{\pm}0.04$‰). In the precipitation method, the measured ${\delta}^{13}C$ values were consistently lower than the theoretically calculated values as dissolved $CO_2$ could not be removed due to the alkaline property of the reagents and the dissolution of air $CO_2$ into the alkaline solution. The drying method also resulted in more negative ${\delta}^{13}C$ than the calculated ${\delta}^{13}C$; however, the difference was systematic ($3.9{\pm}0.3$‰) and there was a strong correlation (${\delta}^{13}C_{calculated}=0.87{\times}{\delta}^{13}C_{measured}-0.624$, $r^2=0.98$) between the calculated and measured ${\delta}^{13}C$. Calibration of ${\delta}^{13}C$ using the relationship between the calculated and the measured ${\delta}^{13}C$ values produced reliable and accurate ${\delta}^{13}C$ values. CONCLUSION: Our results suggest that the drying method is more accurate pre-treatment method to minimize the influence of air $CO_2$ compared to the precipitation method for the determination of ${\delta}^{13}C$ of DOC.