• Journal of information and communication convergence engineering
• /
• v.1 no.2
• /
• pp.70-73
• /
• 2003

We have studied the effects of solvents and additives in the precursor solutions on the characteristics of barium strontium titanate (BST) thin films. The solution having two solvents, ie. acetic acid for barium acetate and strontium acetate and 2-methoxyethanol for titanium isopropoxide and also having an additive of ethylene glycol shows good stability and remains homogeneous even after a month of ageing. It produces excellent BST thin film without cracks. Dielectric constant, loss tangent at 10KHz and leakage current density at 3V of the BST (70/30) thin film made from this solution are 339, 0.052 and 13.3 ${\mu}\textrm{A}$/$\texmrm{cm}^2$, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.2
• /
• pp.32-40
• /
• 2015

Laboratory column experiments were conducted to evaluate the feasibility of injectable apatite method for the sequestration of Sr-90 in groundwater. The columns were tested to evaluate the rate of citrate biodegradation, the amounts of apatite formed, and the treatability of strontium by the sediment and apatite. The results showed the decreases in citrate, calcium, and phosphate concentrations and the increases in alkalinity and citrate degradation products (acetate and formate) in the columns, suggesting that the citrate degradation and formation of calcium phosphate are occurring. Although the calcium and phosphate were not completely consumed within the columns, some amounts of apatite were formed and it showed an ability to treat strontium in groundwater. This study provides a fundamental understanding of reaction mechanisms for the injectable apatite sequestration method for Sr-90 removal.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.679-684
• /
• 2009

Phosphors of $Eu^{2+}$ doped alkaline earth aluminates MA$l_2O_4:Eu^{2+}$ (M=Sr, Ba, Ca) have been prepared by sol-gel process and their characterization of photoluminescence and photocurrent properties have been performed. The phosphors prepared by sol-gel process, due to its advantage of better homogeneity and low synthetic temperature, was synthesized as single phases at lower temperature than the solid-state process; $800{\sim}1000{^{\circ}C}$ for 6 h under mild reduction atmosphere (Ar- 3% $H_2$). It was confirmed that SrA$l_2O_4:Eu^{2+}$ composition revealed the most excellent properties in the brightness and photocurrent.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.388-393
• /
• 1999

Polyurethane foams are polymeric material with repeating groups of urethane and urea. When these are heated with ethylene glycol and K acetate catalyst at $200^{\circ}C$, the transesterification of them leads to soluble products. The mechanisms of the reaction were investigated from the molecular weight and the component distributions of the products by GPC and IR analysis. The degradation of the urethane groups was faster than that of urea groups in transesterification reaction. K acetate catalyst accelerated the rate of the transesterification because it had a high ionization tendency. Each reaction, using K or Sr acetate as a catalyst, progressed in the same reaction path but yielded different compositions in products because of the difference of the reaction rate.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.141-144
• /
• 2011

We report the synthesis of $SrTiO_3$, $BaTiO_3$ and $Ba_xSr_{1-x}TiO_3$ (BST) nanoparticles (NPs) in various compositions (x = 0.25, 0.5 and 0.75) by an inorganic sol-gel method under a basic condition. Highly crystalline nanoparticles were formed at the reaction temperature of 25 - $100^{\circ}C$ from a stabilized titanium alkoxide in tetramethylammonium hydroxide (TMAH) and barium or strontium acetate in aqueous solution. Morphology and particle structure of the synthesized BST NPs were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The BST nanoparticles in various compositions were monodispersed without mutual aggregation, and their average sizes were in the range of 70 - 80 nm. Furthermore, they showed highly crystallized perovskite phase over the whole composition range from $SrTiO_3$ to $BaTiO_3$. We also proposed a mechanism for the low-temperature formation of BST NPs.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.120-126
• /
• 1996

In the present study, we have studied on the characteristics of BST thin films with various Ba/Sr ratios by using sol-gel method. Barium-acetate, strontium-acetate and titanium isopropoxide are used as starting materials to fabricate BST thin films by sol-gel method. The fabrication conditions are estabilished through the TG-dT analyses and XRD measurements. BST thin films with the Ba/Sr ratios of 90/10, 70/30, 50/50 and 30/70 were deposited on the Pt/Ta/SiO$_{2}$Si substrate with the estabilished sol-gel process, and their characteristics were examined. The relative permittivity and the leakage current density at 5V vary from 287 to 395 and from 2.3 to 220${\mu}$A/cm$^{2}$, respectively, with various Ba/Sr ratio. Among the films investigatd in this research, BST (70/30) thin film shows the best relative permittivity and dielectric loss of BST (70/30) thin film are 395 and 0.045, respectively and the leakage current density at 5V is 2.3${\mu}$A/cm$^{2}$.

• Nuclear Engineering and Technology
• /
• v.10 no.1
• /
• pp.13-25
• /
• 1978

The present paper deals with the measurement of the environmental radioactivity at the Kori nuclear Power Plant site area for the Period of six years from December 1970 to December 1976. Gross alpha activity was measured in samples of airborne particulate. Gross beta measurement was performed on soil, water, airborne perticulate, pine needle, precipitation, fallout (gummed acetate paper) and various foodstuffs. Radioactivities of strontium-90 and cesium-l37 were determined by means of radiochemical analyses in samples of spinach, cabbage, barley, rice in terrestrial food, sea eel, shell fish, dulse, green laver in marine product and milk, and of fallout (cloumn), Furthermore, tritum was also analyzed in water sample of well, stream and sea by electrical enrichment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1030-1035
• /
• 2001

Strontium barium niobate, (Sr$\sub$0.5/Ba$\sub$0.5/Nb$_2$O$\sub$6/), thin films of various composition were prepared by the sol-gel method. Solution derived from acetate powders and niobium ethoxide in a mixture of acetic acid, ethylene glycol and 2-methoxyehanol was spin-coated onto bare silicon, Pt-coated silicon and fused silica substrates. Processing parameters were optimized to develop stable solutions which yielded films with relatively low crystallization temperatures. It was determined that ethylene glycol was a necessary component of the solution to increase stability against precipitation and to decrease the crystallization temperature of the films as confirmed by XRD and FT-IR analyses.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.31-38
• /
• 1987

The present study was carried out to determine the effect of the physical, chemical and mineralogical properties of paddy soil on the adsorption and desorption of $Sr^{90}$ from absorbed soils. The results obtained were as follows: 1. Most of the adsorbed $Sr^{90}$ was exchangeable and water soluble. $Sr^{90}$ extracted by ammonium acetate was very high compared to the water soluble fractions, and the ammount decreased with the increase of calcium application, but increased proportionally with the increase of $Sr^{90}$ treatment. 2. The distribution of $Sr^{90}$ in paddy soil depend on the soil type. Average-distribution rates of water soluble, exchangeable and non-exchangeable fractions of $Sr^{90}$ in the soils were 28.6%, 59.3% and 12.1% respectively. 3. The non-exchangeable from of $Sr^{90}$ was high in the soils of high illite and low vermiculite content. 4. The desorption of $Sr^{90}$ from adsorbed soils decreased with the increase of pH and ex-cations of the soils, but increased with the amount of organic matter and clay content in the soil.