• Earthquakes and Structures
• /
• 제6권1호
• /
• pp.71-87
• /
• 2014

Interaction between closely-spaced buildings subject to earthquake induced strong ground motions, termed in the literature as "seismic pounding", occurs commonly during major seismic events in contemporary congested urban environments. Seismic pounding is not taken into account by current codes of practice and is rarely considered in practice at the design stage of new buildings constructed "in contact" with existing ones. Thus far, limited research work has been devoted to quantify the influence of slab-to-slab pounding on the inelastic seismic demands at critical locations of structural members in adjacent structures that are not aligned in series. In this respect, this paper considers a typical case study of a "new" reinforced concrete (R/C) EC8-compliant, torsionally sensitive, 7-story corner building constructed within a block, in bi-lateral contact with two existing R/C 5-story structures with same height floors. A non-linear local plasticity numerical model is developed and a series of non-linear time-history analyses is undertaken considering the corner building "in isolation" from the existing ones (no-pounding case), and in combination with the existing ones (pounding case). Numerical results are reported in terms of averages of ratios of peak inelastic rotation demands at all structural elements (beams, columns, shear walls) at each storey. It is shown that seismic pounding reduces on average the inelastic demands of the structural members at the lower floors of the 7-story building. However, the discrepancy in structural response of the entire block due to torsion-induced, bi-directionally seismic pounding is substantial as a result of the complex nonlinear dynamics of the coupled building block system.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.232-237
• /
• 2008

CIS국가는 구소련국가연합을 지칭하는 말로써, 각 국의 설계 규준은 구소련의 규준인 SNiP을 기본으로 작성하여 서로 유사한 부분이 많이 존재한다. 내진 SNiP 규준은 강진지역인 카자흐스탄을 중심으로 정립되어 구소련의 기준으로 사용되었으며, 독립이후 각 국의 상황에 맞게 발전되었다. 일정규모 이상의 건물은 SNiP 이외 별도의 기술지침 (TU)을 발급받아야 하며, 건축 계획시부터 내진에 유리한 방향으로 설계를 진행한다. 본문에서 소개된 주거복합시설은 계획단계에서부터 내진 안정성을 우선적으로 고려하였으며, 해석프로그램 및 배근방법을 현지에 맞게 적용하였다. 또한 실제 도면 표기방법에서도 국내표기방식과 현지 표기방식을 절충하여 현지와 맞는 도면을 작성하였다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.661-666
• /
• 2005

최근 거대 지진에 의한 쓰나미 발생 확률이 대단히 높다고 경고하고 있다 특히, 항만내의 선박 운용이라는 관점에서, 쓰나미에 의한 막대한 재산 및 인명 피해가 염려되기 때문에 쓰나미에 의한 계류 선박의 영향을 고려하는 것은 대단히 중요한 일이다. 쓰나미가 발생하면 항만 부근에서 입출항중의 선박은 표류를 시작하게 되며, 계류중인 선박도 계류색이 절단되어 표류에 이를 가능성이 높다. 또한, 좌초 및 안벽 충돌 등에 의한 엄청난 사고가 발생할 가능성이 존재한파. 한편, 쓰나미는 수분 정도의 성분파를 포함하고 있기 때문에 계류 선박의 장주기 운동과 공진할 가능성이 높으며, 쓰나미의 유속은 항내에서 발생하는 조류에 비해 대단히 크기 때문에 른 항력이 선박에 작용할 가능성이 있다. 본 연구에서는 대규모 쓰나미의 내습으로 인한 선박 운동의 관점에서 수치 시뮬레이션 과정을 검토하고, 선박 운동에의 영향 및 계류 하중을 수치실험으로 평가한다.

• 한국공간구조학회논문집
• /
• 제6권1호
• /
• pp.101-109
• /
• 2006

내진 댐퍼 브레이스를 가진 강구조물은 브레이스가 지진입력에너지를 충분히 흡수함으로써 주요한 구성부재의 치명적인 피해를 현저하게 저감시키는 것이 가능하므로, 이 시스템 도입에 따른 거동특성 파악 및 적용성에 대한 연구가 활발히 진행되고 있다. 내진 댐퍼 브레이스를 가진 강구조물의 설계에 있어서는 구조물에 대한 브레이스의 강성비를 결정하여야 하며, 내진성능이 우수한 구조물을 설계하기 위해서는 강성비에 따른 구조물의 지진응답 특성을 파악할 필요가 있다. 본 연구에서는 소성설계에 기초하여 내진 댐퍼 브레이스의 수평 강성비에 따른 강구조물의 초기 부재단면를 설계하고, 지진응답해석을 수행하여 초기 부재단면 설계의 타당성 검토 및 동적거동 특성을 파악한다.

• Structural Engineering and Mechanics
• /
• 제13권4호
• /
• pp.369-385
• /
• 2002

Ductility capacity is comprehensively studied for steel moment-resisting frames. Local, story and global ductility are being considered. An appropriate measure of global ductility is suggested. A time domain nonlinear seismic response algorithm is used to evaluate several definitions of ductility. It is observed that for one-story structures, resembling a single degree of freedom (SDOF) system, all definitions of global ductility seem to give reasonable values. However, for complex structures it may give unreasonable values. It indicates that using SDOF systems to estimate the ductility capacity may be a very crude approximation. For multi degree of freedom (MDOF) systems some definitions may not be appropriate, even though they are used in the profession. Results also indicate that the structural global ductility of 4, commonly used for moment-resisting steel frames, cannot be justified based on this study. The ductility of MDOF structural systems and the corresponding equivalent SDOF systems is studied. The global ductility values are very different for the two representations. The ductility reduction factor $F_{\mu}$ is also estimated. For a given frame, the values of the $F_{\mu}$ parameter significantly vary from one earthquake to another, even though the maximum deformation in terms of the interstory displacement is roughly the same for all earthquakes. This is because the $F_{\mu}$ values depend on the amount of dissipated energy, which in turn depends on the plastic mechanism, formed in the frames as well as on the loading, unloading and reloading process at plastic hinges. Based on the results of this study, the Newmark and Hall procedure to relate the ductility reduction factor and the ductility parameter cannot be justified. The reason for this is that SDOF systems were used to model real frames in these studies. Higher mode effects were neglected and energy dissipation was not explicitly considered. In addition, it is not possible to observe the formation of a collapse mechanism in the equivalent SDOF systems. Therefore, the ductility parameter and the force reduction factor should be estimated by using the MDOF representation.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.881-898
• /
• 2013

This paper describes analytical investigation into a new dual function system including a couple of shear links which are connected in series using chevron bracing capable to correlate its performance with magnitude of earthquakes. In this proposed system, called Chevron Knee-Vertical Link Beam braced system (CK-VLB), the inherent hysteretic damping of vertical link beam placed above chevron bracing is exclusively utilized to dissipate the energy of moderate earthquakes through web plastic shear distortion while the rest of the structural elements are in elastic range. Under strong earthquakes, plastic deformation of VLB will be halted via restraining it by Stopper Device (SD) and further imposed displacement subsequently causes yielding of the knee elements located at the bottom of chevron bracing to significantly increase the energy dissipation capacity level. In this paper first by studying the knee yielding mode, a suitable shape and angle for diagonal-knee bracing is proposed. Then finite elements models are developed. Monotonic and cyclic analyses have been conducted to compare dissipation capacities on three individual models of passive systems (CK-VLB, knee braced system and SPS system) by General-purpose finite element program ABAQUS in which a bilinear kinematic hardening model is incorporated to trace the material nonlinearity. Also quasi-static cyclic loading based on the guidelines presented in ATC-24 has been imposed to different models of CK-VLB with changing of vertical link beam section in order to find prime effectiveness on structural frames. Results show that CK-VLB system exhibits stable behavior and is capable of dissipating a significant amount of energy in two separate levels of lateral forces due to different probable earthquakes.

• 터널과지하공간
• /
• 제25권2호
• /
• pp.144-154
• /
• 2015

암석시료에 응력이 가해질 경우 역학적 에너지가 대상 물체에 누적되고, 대상 암석에 한계응력 이상이 가해질 경우 시료의 파괴가 발생한다. 이 때 시료 내부에 저장되어 있던 역학적 에너지는 물리적 변형뿐만 아니라 빛, 열, 소리 등 다양한 형태의 에너지로 발산된다. 본 연구에서는 $-10^{\circ}C$ 저온 환경에서 섬록암, 현무암, 응회암을 대상으로 일축압축강도 시험과 점하중강도 시험을 수행하고, 이때 발생하는 온도 변화를 열적외선카메라를 이용해 측정하고 정량적으로 분석하였다. 파괴 직전 파괴면에 응력이 집중되어 온도가 상승하였고, 파괴 순간 축적된 에너지가 열에너지의 형태로 방출되며 파괴면의 온도가 급격히 상승하는 것이 감지되었다. 강도가 높고 신선한 섬록암과 현무암 시료의 온도 상승폭이 상대적으로 강도가 낮고 풍화된 암석인 응회암 시료의 온도 상승폭에 비해 더 크게 나타났다. 본 연구결과는 저온지역에 위치한 암반사면, 터널, 광산 내부의 응력 집중지점을 감지해 향후 발생 가능한 재해를 예방하는데 적용될 수 있으며, 지진예측을 위한 위성영상 분석에도 적용될 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.529-540
• /
• 2020

The mechanical properties of timber construction have drawn more attention after the 2013 Lushan earthquake. A strong desire to preserve this ancient architectural styles has sprung up in recent years, especially for residential buildings of the mountainous areas. In the column-and-tie timber construction, continuous-tenon joints are the most common structural form to connect the chuanfang (similar to the beam in conventional structures) and the column. To study the cyclic performance of the continuous-tenon joints in column-and-tie timber construction, the reversed lateral cyclic loading tests were carried out on three 3/4 scale specimens with different section heights of the chuanfang. The mechanical behavior was assessed by studying the ultimate bending capacity, deformation ductility and energy dissipation capacity. Test results showed that the slippage of chuanfang occurred when the specimens entered the plastic stage, and the slippage degree increased with the increase of the section height of chuanfang. An obvious plastic deformation of the chuanfang occurred due to the mutual squeezing between the column and chuanfang. A significant pinching was observed on the bending moment-rotation curves, and it was more pronounced as the section height of chuanfang increased. The further numerical investigations showed that the flexural capacity and initial stiffness of the continuous-tenon joints increased with the increase of friction coefficient between the chuanfang and the column, and a more obvious increasing of bending moment occurred after the material yielding. The compressive strength perpendicular to grain of the material played a more significant role in the ultimate bending capacity of continuous-tenon joints than the compressive strength parallel to grain.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.273-286
• /
• 2020

The pile group foundation is widely used for gravity pier of high-speed railway bridges in China. If a moderate or strong earthquake occurs, the pile-surrounding soil will exhibit obvious nonlinearity and significant pile group effect. In this study, an improved pushover analysis model for the pile group foundation with consideration of pile group effect is presented and validated by the quasi-static test. The improved model uses simplified springs to simulate the soil lateral resistance, side friction and tip resistance. PM (axial load-bending moment) plastic hinge model is introduced to simulate the impact of the axial force changing of pile group on their elastic-plastic characteristics. The pile group effect is considered in stress-stain relations of the lateral soil resistance with a reduction factor. The influence factors on nonlinear characteristics and plastic hinge distribution of the pile group foundation are discussed, including the pier height, longitudinal reinforcement ratio and stirrup ratio of the pile, and soil mechanical parameters. Furthermore, the displacement ductility factor, resistance increase factor and yielding stiffness ratio are provided to evaluate the seismic performance of soil-pile system. A case study for the pile group foundation of a railway simply supported beam bridge with a 32 m-span is conducted by numerical analysis. It is shown that the ultimate lateral force of pile group is not determined by the yielding force of the single one in these piles. Therefore, the pile group effect is essential for the seismic performance evaluation of the railway bridge with pile group foundation.

• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.154-163
• /
• 2018

우리나라뿐만 아니라 전 지구적으로 호우발생 빈도의 증가, 태풍이나 허리케인 세기의 강화 등에 따라 대규모 자연재해의 발생횟수와 피해액은 지속적으로 증가하는 추세이다. 태풍, 홍수, 호우, 강풍, 풍랑, 해일, 조수, 대설, 가뭄, 지진, 황사 등과 같은 자연재해는 발생지점과 규모를 예측하기 어려우며, 전조현상이 명확하게 나타나지 않아 대응에 많은 어려움이 존재한다. 그러나 자연재해의 피해규모를 예측할 수 있다면, 조기대응을 통해 피해를 저감할 수 있을 것이다. 따라서 본 연구에서는 국민안전처에서 발간하는 재해연보('91년~'15년)를 기반으로 서해연안지역의 풍랑피해함수를 개발하였다. 풍랑피해함수는 지역별, 시설별로 구분하여 개발하였으며, NRMSE는 1.94%~26.07%로 분석되었다. 개발된 식을 통해 피해규모를 예측하고, 그에 대한 적절한 대응이 이루어진다면, 피해를 저감할 수 있을 것으로 사료된다.