• Asian Pacific Journal of Cancer Prevention
• /
• 제15권18호
• /
• pp.7731-7735
• /
• 2014

Colorectal cancer (CRC) is the third most common cause of death due to cancer in the worldwide and the incidence is also increasing in Turkey. Our present aim was to investigate any association between germ-line methylenetetrahydrofolate reductase (MTHFR) C677T and A1298C polymorphisms and CRC risk in Turkey. A total of 86 CRC cases and 212 control individuals of the same ethnicity were included in the current study. Peripheral blood-DNA samples were used for genotyping by StripAssay technique, based on the reverse-hybridization principle and real-time PCR methods. Results were compared in Pearson Chi-square and multiple logistic regression models. The MTHFR 677TT (homozygous) genotype was found in 20.9% and the T allele frequency 4.2-fold increased in CRC when compared with the control group.The second SNP MTHFR 1298CC (homozygous) genotype was found in 14.0% and the C allele frequency 1.4-fold elevated in the CRC group. The current data suggest strong associations between both SNPs of germ-line MTHFR 677 C>T and 1298 A>C genotypes and CRC susceptibility in the Turkish population. Now the results need to be confirmed with a larger sample size.

• 한국가구학회지
• /
• 제15권2호
• /
• pp.53-62
• /
• 2004

This study explored the development of wood furniture made of aged Castanea crenata Sieb. et Zucc, which has been largely planted in the southern area since 1960s and has hardly been used as furniture materials. First, the physical properties of the chestnut wood including specific gravity, stiffness, and shrinkage were compared with Zelkova serrata, Acer palmatum Thunb., Fagus crenata var. multinevis, Quercus, Tagayasan, Prunus serrulata var. spontanea, Juglans sinenis, Pteronrpus santalinus, Diospyros ebenum, and Fraxinus rhynchophylla, which have largely been used in manufacturing furniture. The chestnut wood had appropliate physical properties for wood furniture like other furniture woods. A piece of small table 50 cm in width, 50 cm in length and 60 cm in height by the chestnut tree was created for a current interior space. Since the diameter of the chestnut tree planted since 1960s is below around 30 cm, the top plate of the table had to be put together by an end-joint technique using a small strip. Finally, it is expected that this study will create a greate motivation for furniture designers, furniture studios and furniture companies in Korea to use the woods from the aged chestnut tree in developing furniture in the future.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.201-206
• /
• 2012

PURPOSES: This study evaluated a measuring technique for tire-pavement interaction noise that uses a noble close proximity (NCPX) method as well as for noise level measured inside of a car (e.g., Inside Noise Level) in term of rumble strips constructed at a tall gate. METHODS: According to the measurements of NCPX and inside noise level (INL), 1/3 octave band frequency analysis and overall noise level calculation were conducted in order to evaluate noise levels of NCPX and INL, depending on types of rumble strips. RESULTS: The tested sections of general concrete pavement surface and two different types of rumble strips were evaluated, using 1/3 octave band frequency analysis and overall noise level. From the analyzed results, it can be concluded that rumble strips generate a relatively huge noise levels when compared to the concrete pavement surface. CONCLUSIONS: Noting that above 3 dBA different noise levels can let drivers know that they are getting close to toll gate; therefore, they should apply their brakes. Thus, the noise levels of rumble strips are required to be reduced, based on considering the neighbors living near toll gates.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.51-60
• /
• 2018

The foundations are classified into shallow and deep, which have important differences: in terms of geometry, the behavior of the soil, its structural functionality, and its constructive systems. The shallow foundations may be of various types according to their function; isolated footings, combined footings, strip footings, and slabs foundation. The isolated footings are of the type rectangular, square and circular. The combined footing may be rectangular, trapezoidal or T-shaped in plan. This paper presents a new model for T-shaped combined footings to obtain the most economical contact surface on the soil (optimal dimensioning) to support an axial load and moment in two directions to each column. The new model considers the soil real pressure, i.e., the pressure varies linearly. The classical model uses the technique of test and error, i.e., a dimension is proposed, and subsequently, the equation of the biaxial bending is used to obtain the stresses acting on each vertex of the T-shaped combined footing, which must meet the conditions following: The minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity that can withstand the soil. To illustrate the validity of the new model, numerical examples are presented to obtain the minimum area of the contact surface on the soil for T-shaped combined footings subjected to an axial load and moments in two directions applied to each column.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1863-1870
• /
• 2000

When an impact stress is applied on the external boundary of double cantilever beam of orthotropic material which crack length is greater than specimen hight and anistropic ratio is very high, dyna mic energy release rate is derived, and the relationship between dynamic energy release rate and crack propagating velocity is studied. Dynamic energy release rate to static energy release rate is decreased with increasment of crack propagating velocity. The relationships between dynamic energy release rate and vertical strain have a similar pattern with those between static energy release rate and vertical strain. When normalized time(Cstla) is greater than or equal to 2, dynamic energy release rate approaches to a constant value.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2008년도 춘계학술대회 학술발표회 논문집
• /
• pp.205-208
• /
• 2008

이 논문은 파이프의 결함을 진단하기 위해서 파이프에 유도 비틀림파를 가진하고 수신하는 개선된 방법을 제시한다. 기존에 니켈 스트립을 파이프에 부착하고 잔류자계를 이용한 Mode 선택 가진 방법에서 나타난 잔류자계의 정량화 문제점, 다른 모드가 동시에 가진되는 문제점 등을 해결하기 위해서 새로운 형태의 Crossed Coils센서를 제안한다. 제안된 센서를 통해 모드 선택이 가능함을 확인하였고, 차후 모드분석을 통하여 Torsional Mode의 최적 가진 조건을 찾을 수 있음을 보인다.

• 한국측량학회지
• /
• 제30권3호
• /
• pp.323-332
• /
• 2012

항공라이다 시스템은 대상지역의 자료를 취득하기 위하여 여러번 경로 관측을 수행하게 되며, 이로 인해 취득된 데이터의 인접 경로간에 편차가 발생한다. 본 연구에서는 스트립 데이터의 비행경로간 관측값의 상대오차를 제거하고 기준 데이터에 절대보정하는 방법으로 수정된 ICP를 이용한 자동 오차보정 기법을 제안하였다. 항공라이다 데이터에 절대 자동보정을 수행하기 위하여 기존의 수치지형도에서 기준점 데이터를 추출하고, 수정된 ICP알고리즘을 적용하였다. 위의 과정을 통하여 항공라이다 데이터의 평균 점간 거리 이내로 스트립간 조정 정확도를 향상시킬 수 있었으며, 대축척 수치지형도를 이용한 절대보정 과정의 자동화 가능성을 확인하였다.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.40-44
• /
• 2008

Shaving in sheet metal forming is defined as a finish process to make the sheared surface clean which was blanked or pierced in the previous shearing stage. In this study the new shaving technique is applied to the progressive operation. The specimen is automatically fed by continuous movement of the strip. Which improve the positioning accuracy higher. For this study a square part which consist of blanking and piercing is selected for investigation and the progressive die which includes pre-piercing, pierce-shaving, half-blanking and blank-shaving etc is prepared for specimens of steel sheet(SPCC) and aluminum alloy sheet(AL5052). Experiments are carried out for several working variables such as shaving allowance, pre-shearing clearance and relative half-blanking depth. Consequently it was confirmed that the shaving by progressive die can be successfully employed to produce the clean parts requiring shaving process and optimum working conditions for shaving SPCC and AL5052 sheet metal are shaving allowance of 0.2mm(1.3% of thickness) and pre-shearing clearance of 5%.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1077-1094
• /
• 2015

This paper presents an experimental study on the effectiveness of simultaneous application of carbon fiber-reinforced polymer (CFRP) and steel jacket in strengthening slender reinforced concrete (RC) column. The columns were 200 mm square cross section with lengths ranging from 1600 to 3000 mm. Ten columns were tested under axial load. The effects of the strengthening technique, slenderness ratio, cross-section area of steel angle and CFRP layer number were examined in terms of axial load-axial strain curve, CFRP strain, steel strip strain and steel angle strain. The experiments indicate that strengthening RC columns with combined CFRP and steel jacket is effective in enhancing the load capacity, ductility and energy dissipation capacity of RC column. Based on the existing models for RC columns strengthened with CFRP and with steel jacket, a design formula considering a slenderness reduction factor is proposed to predict the load capacity of the RC columns strengthened with combined CFRP and steel jacket. The predictions agree well with the experimental results.

• Journal of Korean Neurosurgical Society
• /
• 제46권3호
• /
• pp.195-198
• /
• 2009

Objective : Medpor porous polyethylene was used to reconstruct small bone defects (gaps and burr holes) along a craniotomy bone flap. The feasibility and cosmetic results were evaluated. Methods : Medpor Craniotomy Gap Wedges, V and T, were designed. The V implant is a 10 cm-long wedge strip, the cross section of which is an isosceles triangle with a 4 mm-long base, making it suitable for gaps less than 4 mm after trimming. Meanwhile, the Medpor T wedge includes a 10 mm-wide thin plate on the top surface of the Medpor V Wedge, making it suitable for gaps wider than 4 mm and burr holes. Sixty-eight pterional craniotomies and 39 superciliary approaches were performed using the implants, and the operative results were evaluated with respect to the cosmetic results and pain or tenderness related to the cranial flap. Results : The small bone defects were eliminated with less than 10 minutes additional operative time. In a physical examination, there were no considerable cosmetic problems regarding to the cranial bone defects, such as a linear depression or dimple in the forehead, anterior temporal hollow, preauricular depression, and parietal burr hole defect. Plus, no patient suffered from any infectious complications. Conclusion : The Medpor Craniotomy Gap Wedge is technically easy to work with for reconstructing small bone defects, such as the bone gaps and burr holes created by a craniotomy, and produces excellent cosmetic results.